Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2022-02-27 08:35:20
From: aasag
Description: Supermicro A2SAV
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.3-STABLE GATE amd64
FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
VT(vga): text 80x25
CPU: Intel(R) Atom(TM) Processor E3940 @ 1.60GHz (1593.66-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506c9  Family=0x6  Model=0x5c  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4ff8ebb7<SSE3,PCLMULQDQ,DTES64,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
  Structured Extended Features3=0x2c000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x79<RDCL_NO,SKIP_L1DFL_VME,SSB_NO,MDS_NO>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8084815872 (7710 MB)
CPU microcode: updated from 0x32 to 0x44
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL  EDK2    >
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119 on motherboard
Launching APs: 2 3 1
Timecounter "TSC" frequency 1593659538 Hz quality 1000
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe on motherboard
smbios0: Version: 3.0, BCD Revision: 3.0
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <SUPERM SMCI--MB> on motherboard
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
Event timer "HPET1" frequency 19200000 Hz quality 440
Event timer "HPET2" frequency 19200000 Hz quality 440
Event timer "HPET3" frequency 19200000 Hz quality 440
Event timer "HPET4" frequency 19200000 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x80000000-0x80ffffff,0x88000000-0x8fffffff irq 19 at device 2.0 on pci0
vgapci0: Boot video device
pci0: <simple comms> at device 15.0 (no driver attached)
ahci0: <Intel Apollo Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0x81310000-0x81311fff,0x8131a000-0x8131a0ff,0x81319000-0x813197ff irq 19 at device 18.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib1: <ACPI PCI-PCI bridge> irq 22 at device 19.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 20 at device 19.2 on pci0
pci2: <ACPI PCI bus> on pcib2
igb0: <Intel(R) I210 (Copper)> port 0xe000-0xe01f mem 0x81200000-0x8127ffff,0x81280000-0x81283fff irq 20 at device 0.0 on pci2
igb0: EEPROM V3.25-0 eTrack 0x800005d0
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
pcib3: <ACPI PCI-PCI bridge> irq 21 at device 19.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
pcib5: <PCI-PCI bridge> irq 22 at device 1.0 on pci4
pci5: <PCI bus> on pcib5
igb1: <Intel(R) I210 (Copper)> port 0xd000-0xd01f mem 0x81100000-0x8117ffff,0x81180000-0x81183fff irq 22 at device 0.0 on pci5
igb1: EEPROM V3.25-0 eTrack 0x800005d0
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 4 RX queues 4 TX queues
igb1: Using MSI-X interrupts with 5 vectors
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
pcib6: <PCI-PCI bridge> irq 23 at device 2.0 on pci4
pci6: <PCI bus> on pcib6
ahci1: <Marvell 88SE9230 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0x81040000-0x810407ff irq 23 at device 0.0 on pci6
ahci1: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported
ahci1: quirks=0x900<NOBSYRES,ALTSIG>
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich4: <AHCI channel> at channel 2 on ahci1
ahcich5: <AHCI channel> at channel 3 on ahci1
ahcich6: <AHCI channel> at channel 4 on ahci1
ahcich7: <AHCI channel> at channel 5 on ahci1
ahcich8: <AHCI channel> at channel 6 on ahci1
ahcich9: <AHCI channel> at channel 7 on ahci1
pcib7: <PCI-PCI bridge> irq 20 at device 3.0 on pci4
pci7: <PCI bus> on pcib7
pcib8: <PCI-PCI bridge> irq 21 at device 4.0 on pci4
pci8: <PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 20.0 on pci0
pci9: <ACPI PCI bus> on pcib9
xhci0: <Intel Apollo Lake USB 3.0 controller> mem 0x81300000-0x8130ffff irq 17 at device 21.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ichsmb0: <Intel Broxton SMBus controller> port 0xf040-0xf05f mem 0x81312000-0x813120ff irq 20 at device 31.1 on pci0
acpi_tz0: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 7 on acpi0
acpi_button0: <Power Button> on acpi0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff pnpid ORM0000 on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 10.000 msec
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
Trying to mount root from ufs:/dev/ada0p2 [noatime,rw]...
Root mount waiting for: CAM
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 15 ports with 15 removable, self powered
Root mount waiting for: CAM
ugen0.2: <FTDI TTL-232R-AJ> at usbus0
uftdi0 on uhub0
uftdi0: <TTL-232R-AJ> on usbus0
Root mount waiting for: CAM
ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 2> on usbus0
uhub1: MTT enabled
Root mount waiting for: CAM
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <KINGSTON SVP100S296G CJR10202> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBE]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 91580MB (187557552 512 byte sectors)
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <HGST HTS541515A9E630 KA0OA500> ATA8-ACS SATA 3.x device
ada2: [_SERIAL_NUMBE]
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1430799MB (2930277168 512 byte sectors)
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <HGST HTS541515A9E630 KA0OA500> ATA8-ACS SATA 3.x device
ada3: [_SERIAL_NUMBE]
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 1430799MB (2930277168 512 byte sectors)
ada4 at ahcich4 bus 0 scbus4 target 0 lun 0
ada4: <ST4000LM024-2AN17V 0001> ACS-3 ATA SATA 3.x device
ada4: [_SERIAL_NUMBE]
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada4: Command Queueing enabled
ada4: 3815447MB (7814037168 512 byte sectors)
pass4 at ahcich9 bus 0 scbus9 target 0 lun 0
pass4: <Marvell Console 1.01> Removable Processor SCSI device
pass4: [_SERIAL_NUMBE]
pass4: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes)
GEOM_MIRROR: Device mirror/hd launched (2/2).
mountroot: waiting for device /dev/ada0p2...