Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2022-03-23 17:41:04
From: dadv
Description: IPC2U NISE-3120-LX8 PC/104
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.3-STABLE stable/12-n234879-259bedb8f6d NICE i386
FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
CPU: Geode(TM) Integrated Processor by AMD PCS (499.91-MHz 586-class CPU)
  Origin="AuthenticAMD"  Id=0x5a2  Family=0x5  Model=0xa  Stepping=2
  Features=0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX>
  AMD Features=0xc0400000<MMX+,3DNow!+,3DNow!>
real memory  = 1065025536 (1015 MB)
avail memory = 1023610880 (976 MB)
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
[ath_hal] loaded
K6-family MTRR support enabled (2 registers)
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
cryptosoft0: <software crypto> on motherboard
pcib0 pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem 0xee000000-0xeeffffff,0xef020000-0xef023fff,0xef010000-0xef013fff,0xef014000-0xef017fff,0xef018000-0xef01bfff at device 1.1 on pci0
vgapci0: Boot video device
glxsb0: <AMD Geode LX Security Block (AES-128-CBC, RNG)> mem 0xef01c000-0xef01ffff at device 1.2 on pci0
pci0: <serial bus, FireWire> at device 11.0 (no driver attached)
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xe000-0xe0ff mem 0xef024000-0xef0240ff irq 10 at device 12.0 on pci0
vr0: Quirks: 0x0
vr0: Revision: 0x86
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr0: Ethernet address: [_MAC_XXXXXXXXXX]
vr1: <VIA VT6105 Rhine III 10/100BaseTX> port 0xe400-0xe4ff mem 0xef025000-0xef0250ff irq 11 at device 13.0 on pci0
vr1: Quirks: 0x0
vr1: Revision: 0x86
miibus1: <MII bus> on vr1
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr1: Ethernet address: [_MAC_XXXXXXXXXX]
ath0: <Atheros 5212> mem 0xef000000-0xef00ffff irq 7 at device 14.0 on pci0
ath0: AR5212 mac 5.6 RF5111 phy 4.1
ath0: 2GHz radio: 0x0023; 5GHz radio: 0x0017
isab0: <PCI-ISA bridge> port 0x6000-0x6007,0x6100-0x61ff,0x6200-0x623f,0x9d00-0x9d7f,0x9c00-0x9c3f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD CS5536 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 15.2 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xef027000-0xef027fff irq 11 at device 15.4 on pci0
usbus0 on ohci0
ehci0: <AMD CS5536 (Geode) USB 2.0 controller> mem 0xef028000-0xef028fff irq 11 at device 15.5 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
cpu0 on motherboard
attimer0: <AT timer> at port 0x40-0x43 irq 0 pnpid PNP0100 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP0501 on isa0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 pnpid PNP0501 on isa0
uart2: <16550 or compatible> at port 0x3e8-0x3ef irq 5 pnpid PNP0501 on isa0
unknown: <PNP0501> can't assign resources (irq)
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xef000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
WARNING: Device "consolectl" is Giant locked and may be deleted before FreeBSD 14.0.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0501> can't assign resources (irq)
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to deny, logging disabled
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched FQ_CODEL loaded
load_dn_sched dn_sched FQ_PIE loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_aqm dn_aqm CODEL loaded
load_dn_aqm dn_aqm PIE loaded
Timecounter "TSC" frequency 499911693 Hz quality 800
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <AMD OHCI root HUB> at usbus0
uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <AMD EHCI root HUB> at usbus1
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Trying to mount root from ufs:ada0s1a []...
Root mount waiting for: CAM usbus0 usbus1
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <SILICON POWER 20101001> ATA device
ada0: 66.700MB/s transfers (UDMA4, PIO 512bytes)
ada0: 15279MB (31293360 512 byte sectors)
uhub0: 4 ports with 4 removable, self powered
Root mount waiting for: usbus1
uhub1: 4 ports with 4 removable, self powered
mountroot: waiting for device ada0s1a...
Dual Console: Video Primary, Serial Secondary
random: unblocking device.
wlan0: Ethernet address: [_MAC_XXXXXXXXXX]
lo0: link state changed to UP
vr0: link state changed to DOWN
vr1: link state changed to DOWN
vr0: link state changed to UP