Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-03-28 07:27:46
From: vikashb
Description: FreeBSD/amd64 on Dell Inc. PowerEdge R320
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p8 #0: Tue Mar 15 09:36:28 UTC 2022
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(efifb): resolution 800x600
CPU: Intel(R) Xeon(R) CPU E5-1410 v2 @ 2.80GHz (2800.06-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33298710528 (31756 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic1: MADT APIC ID 1 != hw id 15
ioapic0 <Version 2.0> irqs 0-23
ioapic1 <Version 2.0> irqs 32-55
Launching APs: 1 7 6 3 2 5 4
Timecounter "TSC-low" frequency 1400030082 Hz quality 1000
KTLS: Initialized 8 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
000.000062 [4354] netmap_init netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <DELL PE_SC3>
acpi0: Power Button (fixed)
apei0: <ACPI Platform Error Interface> on acpi0
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 53 at device 1.0 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
mfi0: <Drake Skinny> port 0xfc00-0xfcff mem 0xdcffc000-0xdcffffff,0xdcf80000-0xdcfbffff irq 34 at device 0.0 numa-domain 0 on pci1
mfi0: Using MSI
mfi0: Megaraid SAS driver Ver 4.23
mfi0: 2137 (701774524s/0x0020/info) - Shutdown command received from host
mfi0: 2138 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0073/1000/1f51/1028)
mfi0: 2139 (boot + 3s/0x0020/info) - Firmware version 2.121.14-3416
mfi0: 2140 (boot + 5s/0x0020/info) - Package version 20.13.0-0007
mfi0: 2141 (boot + 5s/0x0020/info) - Board Revision A06
mfi0: 2142 (boot + 31s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 2143 (boot + 31s/0x0002/info) - Inserted: Encl PD 20
mfi0: 2144 (boot + 31s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=5d81f060ca1f7700,0000000000000000
mfi0: 2145 (boot + 31s/0x0002/info) - Inserted: PD 00(e0x20/s0)
pcib2: <ACPI PCI-PCI bridge> irq 53 at device 3.0 numa-domain 0 on pci0
mfi0: 2146 (boot + 31s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=50000396780a1cpci2: <ACPI PCI bus>86,0000000000000000
mfi0: 2147 (boot + 31s/0x0002/info) - Inserted: PD 01(e0x20/s1)
numa-domain 0 on pcib2
mfi0: 2148 (boot + 31s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=5000c500765d58dd,0000000000000000
mfi0: 2149 (boot + 31s/0x0002/info) - Inserted: PD 02(e0x20/s2)
mfi0: 2150 (boot + 31s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=5000c5005fc33501,0000000000000000
mfi0: 2151 (boot + 31s/0x0002/info) - Inserted: PD 03(e0x20/s3)
mfi0: 2152 (boot + 31s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=50000396782890c2,0000000000000000
mfi0: 2153 (boot + 31s/0x0042/info) - Dedicated Hot Spare created on PD 02(e0x20/s2) (ded,rev,ea,ac=1)
mfi0: 2154 (boot + 31s/0x0042/info) - Dedicated Hot Spare created on PD 03(e0x20/s3) (ded,rev,ea,ac=1)
mfi0: 2155 (701774599s/0x0020/info) - Time established as 03/28/22 9:23:19; (43 seconds since power on)
mfi0: 2156 (701774671s/0x0020/info) - Host driver is loaded and operational
pcib3: <PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0
pci3: <PCI bus> numa-domain 0 on pcib3
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xdf0fd000-0xdf0fd3ff irq 23 at device 26.0 numa-domain 0 on pci0
usbus0: EHCI version 1.0
usbus0 numa-domain 0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib4: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci0
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0xd90a0000-0xd90affff,0xd90b0000-0xd90bffff,0xd90c0000-0xd90cffff irq 16 at device 0.0 numa-domain 0 on pci5
bge0: APE FW version: NCSI v1.2.33.0
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0xd90d0000-0xd90dffff,0xd90e0000-0xd90effff,0xd90f0000-0xd90fffff irq 17 at device 0.1 numa-domain 0 on pci5
bge1: APE FW version: NCSI v1.2.33.0
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci0
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pcib7: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci6
pci7: <PCI bus> numa-domain 0 on pcib7
pcib8: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci7
pci8: <PCI bus> numa-domain 0 on pcib8
pcib9: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8
pci9: <PCI bus> numa-domain 0 on pcib9
vgapci0: <VGA-compatible display> mem 0xd8000000-0xd8ffffff,0xde7fc000-0xde7fffff,0xdd800000-0xddffffff irq 19 at device 0.0 numa-domain 0 on pci9
vgapci0: Boot video device
pcib10: <PCI-PCI bridge> at device 1.0 numa-domain 0 on pci7
pci10: <PCI bus> numa-domain 0 on pcib10
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xdf0fe000-0xdf0fe3ff irq 22 at device 29.0 numa-domain 0 on pci0
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci1
usbus1: 480Mbps High Speed USB v2.0
pcib11: <PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0
pci11: <PCI bus> numa-domain 0 on pcib11
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0xece8-0xecef,0xecf8-0xecfb,0xecf0-0xecf7,0xecfc-0xecff,0xecc0-0xecdf mem 0xdf0ff000-0xdf0ff7ff irq 20 at device 31.2 numa-domain 0 on pci0
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib12: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci12: <ACPI PCI bus> numa-domain 0 on pcib12
pci12: <dasp, performance counters> at device 14.1 (no driver attached)
pci12: <dasp, performance counters> at device 19.1 (no driver attached)
pci12: <dasp, performance counters> at device 19.5 (no driver attached)
pcib13: <ACPI Host-PCI bridge> on acpi0
pci13: <ACPI PCI bus> on pcib13
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xec000-0xeffff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f1000001f00
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f1000001f00
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f1000001f00
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f1000001f00
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f1000001f00
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f1000001f00
device_attach: est5 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f1000001f00
device_attach: est6 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f1000001f00
device_attach: est7 attach returned 6
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
mfid0 numa-domain 0 on mfi0
mfid0: 285568MB (584843264 sectors) RAID volume 'wortel' is optimal
ses0 at ahciem0 bus 0 scbus5 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses0: pass0,cd0 in 'Slot 04', SATA Slot: scbus4 target 0
cd0 at ahcich4 bus 0 scbus4 target 0 lun 0
cd0: <PLDS DVD-ROM DS-8DBSH CD51> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 usbus1
uhub0 numa-domain 0 on usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1 numa-domain 0 on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Root mount waiting for: usbus0 usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub3 numa-domain 0 on uhub1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
Root mount waiting for: usbus0 usbus1
uhub2: 6 ports with 6 removable, self powered
Root mount waiting for: usbus0 usbus1
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <no manufacturer Gadget USB HUB> at usbus0
uhub4 numa-domain 0 on uhub2
uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus0
Root mount waiting for: usbus0
uhub4: 6 ports with 6 removable, self powered
ugen0.4: <Avocent Keyboard/Mouse Function> at usbus0
ukbd0 numa-domain 0 on uhub4
ukbd0: <Keyboard> on usbus0
kbd1 at ukbd0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
lo0: link state changed to UP
bge0: link state changed to DOWN
ums0 numa-domain 0 on uhub4
ums0: <Mouse> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
ums1 numa-domain 0 on uhub4
ums1: <Mouse REL> on usbus0
ums1: 3 buttons and [XYZ] coordinates ID=0
bge0: link state changed to UP