Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-03-30 14:50:44
From: TA
Description: Intel Pentium II Desktop
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p8 #0: Tue Mar 15 09:19:27 UTC 2022
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/i386.i386/sys/GENERIC i386
FreeBSD clang version 11.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(vga): resolution 640x480
CPU: Pentium II/Pentium II Xeon/Celeron (233.87-MHz 686-class CPU)
Origin="GenuineIntel" Id=0x634 Family=0x6 Model=0x3 Stepping=4
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 201326592 (192 MB)
avail memory = 163151872 (155 MB)
random: unblocking device.
Timecounter "TSC" frequency 233869719 Hz quality 800
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
Firmware Error (ACPI): A valid RSDP was not found (20201113/tbxfroot-369)
ACPI: Table initialisation failed: AE_NOT_FOUND
ACPI: Try disabling either ACPI or apic support.
vtvga0: <VT VGA driver>
cryptosoft0: <software crypto>
aesni0: No AES or SHA support.
pcib0 pcibus 0
pir0: <PCI Interrupt Routing Table: 6 Entries>
pci0: <PCI bus> on pcib0
agp0: <Intel 82443LX (440 LX) host to PCI bridge> on hostb0
WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 14.0.
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xe6000000-0xe6ffffff,0xe5000000-0xe5000fff at device 0.0 on pci1
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 11 at device 7.2 on pci0
usbus0 on uhci0
piix0: <PIIX Timecounter> port 0x5000-0x500f at device 7.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
pci0: <multimedia, audio> at device 9.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem 0xe7040000-0xe70400ff irq 12 at device 10.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: [_MAC_XXXXXXXXXX]
cpu0
isa0: too many dependent configs (8)
Firmware Error (ACPI): A valid RSDP was not found (20201113/tbxfroot-369)
Firmware Error (ACPI): A valid RSDP was not found (20201113/tbxfroot-369)
attimer0: <AT timer> at port 0x40-0x43 irq 0 pnpid PNP0100 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Firmware Error (ACPI): A valid RSDP was not found (20201113/tbxfroot-369)
atrtc0: <AT realtime clock> at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
Firmware Error (ACPI): A valid RSDP was not found (20201113/tbxfroot-369)
Firmware Error (ACPI): A valid RSDP was not found (20201113/tbxfroot-369)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0a03> can't assign resources (port)
Firmware Error (ACPI): A valid RSDP was not found (20201113/tbxfroot-369)
Firmware Error (ACPI): A valid RSDP was not found (20201113/tbxfroot-369)
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP0501 on isa0
fdc0: <Enhanced floppy controller> at port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 pnpid PNP0700 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fd1: <1200-KB 5.25" drive> on fdc0 drive 1
ppc0: <Standard parallel printer port> at port 0x378-0x37f irq 7 pnpid PNP0400 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
Firmware Error (ACPI): A valid RSDP was not found (20201113/tbxfroot-369)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 pnpid PNP0501 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff pnpid ORM0000 on isa0
Firmware Error (ACPI): A valid RSDP was not found (20201113/tbxfroot-369)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0a03> can't assign resources (port)
Firmware Error (ACPI): A valid RSDP was not found (20201113/tbxfroot-369)
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Trying to mount root from ufs:/dev/ada0s1a [rw]...
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD1600AAJB-00J3A0 01.03E01> ATA8-ACS device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 33.300MB/s transfers (UDMA2, PIO 8192bytes)
ada0: 152627MB (312581808 512 byte sectors)
ada1 at ata0 bus 0 scbus0 target 1 lun 0
ada1: <Maxtor 91008D7 WAS82739> ATA-4 device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 33.300MB/s transfers (UDMA2, PIO 8192bytes)
ada1: 9617MB (19696320 512 byte sectors)
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST DVD-RAM GH22NP20 2.00> Removable CD-ROM SCSI device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
uhub0: 2 ports with 2 removable, self powered
ugen0.2: <Logitech G203 Prodigy Gaming Mouse> at usbus0
ukbd0 on uhub0
ukbd0: <Logitech G203 Prodigy Gaming Mouse, class 0/0, rev 2.00/7.03, addr 2> on usbus0
kbd2 at ukbd0
lo0: link state changed to UP
rl0: link state changed to DOWN
rl0: link state changed to UP
ums0 on uhub0
ums0: <Logitech G203 Prodigy Gaming Mouse, class 0/0, rev 2.00/7.03, addr 2> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=0