NYC*BUG dmesgd

Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

---

Date: 2022-04-05 00:05:51
From: yamori813
Description: Asus_RT-N12 with bgmac and robosw

---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.3-STABLE #2 yamori813_modify-n234746-aa1b4f879d17-dirty: Tue Apr  5 09:01:45 JST 2022
    hiroki@zrouter:/usr/home/hiroki/obj/usr/home/hiroki/ZRouter/tmp/usr/home/hiroki/freebsd-src/mips.mipsel/sys/Asus_RT-N12 mips
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: MIPS Technologies processor v73.151
  MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes)
  L1 i-cache: 4 ways of 256 sets, 32 bytes per line
  L1 d-cache: 4 ways of 256 sets, 32 bytes per line
  L2 cache: disabled
  Config1=0xbea3519e<PerfCount,WatchRegs,MIPS16,EJTAG>
  Config2=0x80000000
  Config3=0x2c20<ULRI,DSP2P,DSPP,VInt>
  Config7=0xa0000800<WII>
real memory  = 32923648 (32152K bytes)
avail memory = 27136000 (25MB)
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
nexus0: <MIPS32 root nexus>
bhnd_nvram0: <Broadcom> on nexus0
bhnd0: <BCM53572 BCMA bus> at mem 0x18000000-0x180fffff on nexus0
bhnd_chipc0: <Broadcom ChipCommon I/O Controller, rev 39> mem 0x18000000-0x18000fff,0x1fc00000-0x1fffffff,0x1c000000-0x1dffffff,0x18100000-0x18100fff,0x18105000-0x18105fff irq 8 at core 0 on bhnd0
cpupic0: <MIPS32 Interrupt Controller> on nexus0
bcm_mips0: <MIPS MIPS74k CPU, rev 5> mem 0x18003000-0x18003fff,0x18103000-0x18103fff irq 11 at core 3 on bhnd0
bhnd_pmu0: <Broadcom ChipCommon PMU, rev 9> on bhnd_chipc0
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 150000000 Hz quality 800
Event timer "MIPS32" frequency 150000000 Hz quality 800
bhnd_chipc0: <gpio> at mem 0x18000000-0x18000fff (no driver attached)
uart0: <16750 or compatible> mem 0x18000300-0x180003ff irq 12 on bhnd_chipc0
uart0: console (115200,n,8,1)
spi0: <Broadcom ChipCommon SPI> mem 0x1c000000-0x1dffffff,0x18000040-0x1800004b on bhnd_chipc0
spibus0: <SPI bus> on spi0
mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
mx25l0: device type mx25ll64, size 8192K in 128 sectors of 64K, erase size 64K
bhnd0: <Broadcom 802.11 MAC/PHY/Radio, rev 28> mem 0x18001000-0x18001fff,0x18101000-0x18101fff irq 9 at core 1 (no driver attached)
bgmac0: <BHND Gigabit MAC> mem 0x18002000-0x18002fff,0x18005000-0x18005fff,0x18102000-0x18102fff irq 10 at core 2 on bhnd0
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_TX_CTRL     =00000000 (OFF,DMA,,,PARITYCHK,off:00000000,ext:00000000)
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_TX_INDEX    =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_TX_RINGLOW  =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_TX_RINGHIGH =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_TX_STATE    =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_TX_ERROR    =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_RX_CTRL     =00000008 (OFF,DMA,,,PARITYCHK,off:00000008,ext:00000000)
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_RX_INDEX    =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_RX_RINGLOW  =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_RX_RINGHIGH =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_RX_STATE    =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_RX_ERROR    =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_CMD_CFG =1800054<Prom>
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_RX_MAX_LEN      =000005ee
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DEVICE_CONTROL  =00300011
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DEVICE_STATUS   =04110100
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_BIST_STATUS     =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_INTR_STATUS     =10<MDIO>
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_INTERRUPT_MASK  =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_GP_TIMER        =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_INTR_RECV_LAZY  =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_PWR_CTL     =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_FLOW_CTL_THRESH     =026602cc
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_PAUSE_CTL   =0002ffff
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_TXQ_CTL =00000200
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_RXQ_CTL =06000001
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_CLOCK_CONTROL_ST    =010b0100
bgmac0: [BHND  info] bgmac_print_debug:145 => BGMAC_MIB_TX_BYTES        =00000000
bgmac0: [BHND  info] bgmac_print_debug:145 => BGMAC_MIB_TX_PCKTS        =00000000
bgmac0: [BHND  info] bgmac_print_debug:145 => BGMAC_MIB_TX_DEFERED      =00000000
bgmac0: [BHND  info] bgmac_print_debug:145 => BGMAC_MIB_TX_Q0_PKTS      =00000000
bgmac0: [BHND  info] bgmac_print_debug:145 => BGMAC_MIB_TX_Q0_OCTETS    =00000000
bgmac0: [BHND  info] bgmac_print_debug:145 => BGMAC_MIB_RX_GOOD_BYTES   =00000000
bgmac0: [BHND  info] bgmac_print_debug:145 => BGMAC_MIB_RX_GOOD_PCKTS   =00000000
bgmac0: [BHND  info] bgmac_print_debug:145 => BGMAC_MIB_RX_BYTES        =00000000
bgmac0: [BHND  info] bgmac_print_debug:145 => BGMAC_MIB_RX_PCKTS        =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_TX_ERR_JABBER_PKTS      =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_TX_ERR_OVERSIZE_PKTS    =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_TX_ERR_UNDERRUNS        =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_TX_ERR_EXCESSIVE_COLS   =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_TX_ERR_LATE_COLS        =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_RX_ERR_JABBER_PCKTS     =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_RX_ERR_OVERSIZE_PCKTS   =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_RX_ERR_MISSED_PCKTS     =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_RX_ERR_CRC_ALIGN        =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_RX_ERR_UNDERSIZE        =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_RX_ERR_CRC      =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_RX_ERR_ALIGN    =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_RX_ERR_SYMBOL   =00000000
bgmac0: Ethernet address: [_MAC_XXXXXXXXXX]
mdio0: <MDIO> on bgmac0
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
robosw0: <Broadcom RoboSwitch> on mdio0
robosw0: found switch BCM5325
robosw0: reset: skipped (0)
robosw0: VLAN settings...
miibus0: <MII bus> on robosw0
brgphy0: <BCM5717C 1000BASE-T media interface> PHY 0 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus1: <MII bus> on robosw0
brgphy1: <BCM5717C 1000BASE-T media interface> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus2: <MII bus> on robosw0
brgphy2: <BCM5717C 1000BASE-T media interface> PHY 2 on miibus2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus3: <MII bus> on robosw0
brgphy3: <BCM5717C 1000BASE-T media interface> PHY 3 on miibus3
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus4: <MII bus> on robosw0
brgphy4: <BCM5717C 1000BASE-T media interface> PHY 4 on miibus4
brgphy4:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
etherswitch0: <Switch controller> on robosw0
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_TX_CTRL     =00000801 (ON,DMA,,,,off:00000000,ext:00000000)
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_TX_INDEX    =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_TX_RINGLOW  =00680000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_TX_RINGHIGH =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_TX_STATE    =20000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_TX_ERROR    =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_RX_CTRL     =00000c3d (ON,DMA,,OVERFLOWCNT,,off:0000003c,ext:00000000)
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_RX_INDEX    =00000400
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_RX_RINGLOW  =005cf000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_RX_RINGHIGH =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_RX_STATE    =10000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DMA_RX_ERROR    =00000010
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_CMD_CFG =31800054<Prom>
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_RX_MAX_LEN      =000005ee
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DEVICE_CONTROL  =00300011
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_DEVICE_STATUS   =04110100
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_BIST_STATUS     =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_INTR_STATUS     =10<MDIO>
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_INTERRUPT_MASK  =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_GP_TIMER        =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_INTR_RECV_LAZY  =01000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_PWR_CTL     =00000000
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_FLOW_CTL_THRESH     =026602cc
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_PAUSE_CTL   =0002ffff
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_TXQ_CTL =00000200
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_REG_RXQ_CTL =06000001
bgmac0: [BHND  info] bgmac_print_debug:144 => BGMAC_CLOCK_CONTROL_ST    =030b0302
bgmac0: [BHND  info] bgmac_print_debug:145 => BGMAC_MIB_TX_BYTES        =00000000
bgmac0: [BHND  info] bgmac_print_debug:145 => BGMAC_MIB_TX_PCKTS        =00000000
bgmac0: [BHND  info] bgmac_print_debug:145 => BGMAC_MIB_TX_DEFERED      =00000000
bgmac0: [BHND  info] bgmac_print_debug:145 => BGMAC_MIB_TX_Q0_PKTS      =00000000
bgmac0: [BHND  info] bgmac_print_debug:145 => BGMAC_MIB_TX_Q0_OCTETS    =00000000
bgmac0: [BHND  info] bgmac_print_debug:145 => BGMAC_MIB_RX_GOOD_BYTES   =00000000
bgmac0: [BHND  info] bgmac_print_debug:145 => BGMAC_MIB_RX_GOOD_PCKTS   =00000000
bgmac0: [BHND  info] bgmac_print_debug:145 => BGMAC_MIB_RX_BYTES        =00000000
bgmac0: [BHND  info] bgmac_print_debug:145 => BGMAC_MIB_RX_PCKTS        =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_TX_ERR_JABBER_PKTS      =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_TX_ERR_OVERSIZE_PKTS    =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_TX_ERR_UNDERRUNS        =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_TX_ERR_EXCESSIVE_COLS   =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_TX_ERR_LATE_COLS        =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_RX_ERR_JABBER_PCKTS     =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_RX_ERR_OVERSIZE_PCKTS   =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_RX_ERR_MISSED_PCKTS     =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_RX_ERR_CRC_ALIGN        =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_RX_ERR_UNDERSIZE        =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_RX_ERR_CRC      =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_RX_ERR_ALIGN    =00000000
bgmac0: [BHND  info] bgmac_print_debug:146 => BGMAC_MIB_RX_ERR_SYMBOL   =00000000
bhnd0: <Broadcom SDR/DDR1 Memory Controller, rev 2> mem 0x18004000-0x18004fff,0-0x7ffffff,0x10000000-0x17ffffff,0x18104000-0x18104fff at core 4 (no driver attached)
Timecounters tick every 10.000 msec
robosw0port0: link state changed to DOWN
robosw0port1: link state changed to DOWN
robosw0port2: link state changed to DOWN
robosw0port3: link state changed to DOWN
robosw0port4: link state changed to DOWN
Trying to mount root from cd9660:/dev/map/rootfs.uzip []...
Warning: no time-of-day clock registered, system time will not be set accurately
robosw0port2: link state changed to UP
random: unblocking device.
lo0: link state changed to UP
/tmp: optimization changed from SPACE to TIME

All comments/news/posts are the property of their individual owner and is presented without warranty of suitability, and solely as an informational resource.
This site Copyright © 2004-2024 NYC*BUG.