Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2022-04-07 05:27:54
From: yamori813
Description: Onion_Omega
---<<BOOT>>---
ar933x_configure_gmac: GMAC config was 0x00000010
ar933x_configure_gmac: GMAC setting is 0x00000000; register is now 0x00000010
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.3-STABLE yamori813_modify-n234750-ad5f8593c249 Onion_Omega mips
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "kernel" at 0x80462ec0.
CPU: MIPS Technologies (Atheros AR9330 rev 1) processor v116.147
  MMU: Standard TLB, 16 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes)
  L1 i-cache: 4 ways of 512 sets, 32 bytes per line
  L1 d-cache: 4 ways of 256 sets, 32 bytes per line
  L2 cache: disabled
  Config1=0x9ee3519e<PerfCount,WatchRegs,MIPS16,EJTAG>
  Config2=0x80000000
  Config3=0x20<VInt>
  Config7=0x0
real memory  = 67108864 (65536K bytes)
Physical memory chunk(s):
0x004f5000 - 0x03ef4fff, 60817408 bytes (14848 pages)
avail memory = 59977728 (57MB)
random: no preloaded entropy cache
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
hostuuid: using 00000000-0000-0000-0000-000000000000
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
mem: <memory>
null: <full device, null device, zero device>
nexus0: <MIPS32 root nexus>
argemdio0: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x1a000000-0x1a000fff on nexus0
mdio0: <MDIO> on argemdio0
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
arswitch0: <Atheros AR7240 Ethernet Switch (ver 0 rev 0)> on mdio0
miibus0: <MII bus> on arswitch0
atphy0: <Atheros AR8021 10/100/1000 PHY> PHY 0 on miibus0
atphy0: OUI 0x00c82e, model 0x0004, rev. 1
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus1: <MII bus> on arswitch0
atphy1: <Atheros AR8021 10/100/1000 PHY> PHY 1 on miibus1
atphy1: OUI 0x00c82e, model 0x0004, rev. 1
atphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus2: <MII bus> on arswitch0
atphy2: <Atheros AR8021 10/100/1000 PHY> PHY 2 on miibus2
atphy2: OUI 0x00c82e, model 0x0004, rev. 1
atphy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus3: <MII bus> on arswitch0
atphy3: <Atheros AR8021 10/100/1000 PHY> PHY 3 on miibus3
atphy3: OUI 0x00c82e, model 0x0004, rev. 1
atphy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
etherswitch0: <Switch controller> on arswitch0
mdio1: <MDIO> on arswitch0
mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 200000000 Hz quality 800
Event timer "MIPS32" frequency 200000000 Hz quality 800
apb0 at irq 4 on nexus0
uart0: <ar933x> at mem 0x18020000-0x18020017 irq 3 on apb0
uart0: console (115200,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0
gpio0: [GIANT-LOCKED]
gpio0: function_set: 0x0
gpio0: function_clear: 0x0
gpio0: gpio pinmask=0xc8ff1c3
gpiobus0: <GPIO bus> on gpio0
gpioled0: <GPIO led> at pin 27 on gpiobus0
gpioled1: <GPIO led> at pin 17 on gpiobus0
gpioled2: <GPIO led> at pin 16 on gpiobus0
gpioled3: <GPIO led> at pin 15 on gpiobus0
gpiospi0: <GPIO SPI bit-banging driver> at pins 1,6-7,18 on gpiobus0
gpiospi0: frequency: 1 Hz
gpiospi0: Use GPIO pins: sclk=1, mosi=3, miso=0, cs0=2, cs1=255, cs2=255, cs3=255
spibus0: <SPI bus> on gpiospi0
spigen0: <SPI Generic IO> at cs 0 mode 0 on spibus0
gpioc0: <GPIO controller> on gpio0
arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0
arge0: Overriding MAC from EEPROM
miiproxy0: <MII/MDIO proxy, MII side> on arge0
miiproxy0: attached to target mdio1
arge0: finishing attachment, phymask 0010, proxy set 
miibus4: <MII bus> on miiproxy0
atphy4: <Atheros AR8021 10/100/1000 PHY> PHY 4 on miibus4
atphy4: OUI 0x00c82e, model 0x0004, rev. 1
atphy4:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
arge0: bpf attached
arge0: Ethernet address: [_MAC_XXXXXXXXXX]
arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0
arge1: Overriding MAC from EEPROM
mii_attach_proxy: not attaching, no mdio device hint for arge1
arge1: finishing attachment, phymask 0000, proxy null 
arge1: bpf attached
arge1: Ethernet address: [_MAC_XXXXXXXXXX]
spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0
spibus1: <SPI bus> on spi0
mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus1
mx25l0: device type w25q128, size 16384K in 256 sectors of 64K, erase size 4K
ehci0: <AR71XX Integrated USB 2.0 controller> at mem 0x1b000100-0x1bffffff irq 1 on nexus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0
Device configuration finished.
Timecounters tick every 1.000 msec
lo0: bpf attached
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024
arswitch0port1: link state changed to DOWN
arswitch0port2: link state changed to DOWN
arswitch0port3: link state changed to DOWN
arswitch0port4: link state changed to DOWN
GEOM: new disk flash/spi0
usbus0: 480Mbps High Speed USB v2.0
Trying to mount root from cd9660:/dev/map/rootfs.uzip []...
MAP: flash/spi0: 0x20000, data=0x20000 "/dev/map/bootloader"
MAP: flash/spi0: 20000xf90000, data=0xf90000 "/dev/map/upgrade"
MAP: search flash/spi0 for key ".!/bin/sh" from 0xa0000, step 0x10000
ugen0.1: <Atheros EHCI root HUB> at usbus0
uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
MAP: flash/spi0: 20000x130000, data=0x130000 "/dev/map/kernel"
MAP: search flash/spi0 for key ".!/bin/sh" from 0xa0000, step 0x10000
MAP: flash/spi0: 150000xe90000, data=0xe90000 "/dev/map/rootfs"
MAP: flash/spi0: fe0000x10000, data=0x10000 "/dev/map/cfg"
MAP: flash/spi0: ff0000x10000, data=0x10000 "/dev/map/ART"
MAP: No valid partition found at map/rootfs.uzip
cd9660: RockRidge Extension
Warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
uhub0: 1 port with 1 removable, self powered
MAP: No valid partition found at md0
random: unblocking device.
MAP: No valid partition found at md0
lo0: link state changed to UP
/tmp: optimization changed from SPACE to TIME
arge0: link state changed to DOWN
arge0: link state changed to UP