Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-04-16 19:28:13
From: [tj]
Description: Ryzen 3800 build
---<<BOOT>>---
Copyright (c) 1992-2022 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-CURRENT #0 main-n254817-bf13db086b8: Thu Apr 14 07:05:04 UTC 2022
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): resolution 640x480
CPU: AMD Ryzen 7 3800X 8-Core Processor (3892.91-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
Structured Extended Features2=0x400004<UMIP,RDPID>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x108b657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,STIBP,SSBD>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 34358689792 (32767 MB)
avail memory = 33245081600 (31704 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 10 14 11 15 6 7 3 1 5 9 13 4 2 8 12
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe
smbios0: Version: 3.2, BCD Revision: 3.2
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 1.0 on pci2
pci3: <ACPI PCI bus> on pcib3
nvme0: <Generic NVMe Device> mem 0xfcb00000-0xfcb03fff,0xfcb04000-0xfcb05fff irq 29 at device 0.0 on pci3
pcib4: <ACPI PCI-PCI bridge> at device 2.0 on pci2
pci4: <ACPI PCI bus> on pcib4
ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xe020-0xe03f mem 0xfc480000-0xfc4fffff,0xfc504000-0xfc507fff irq 30 at device 0.0 on pci4
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: queue equality override not set, capping rx_queues at 8 and tx_queues at 8
ix0: Using 8 RX queues 8 TX queues
ix0: Using MSI-X interrupts with 9 vectors
ix0: allocated for 8 queues
ix0: allocated for 8 rx queues
ix0: Ethernet address: [_MAC_XXXXXXXXXX]
ix0: PCI Express Bus: Speed 5.0GT/s Width x4
ix0: eTrack 0x000118b3 PHY FW V65535
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xe000-0xe01f mem 0xfc380000-0xfc3fffff,0xfc500000-0xfc503fff irq 31 at device 0.1 on pci4
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: queue equality override not set, capping rx_queues at 8 and tx_queues at 8
ix1: Using 8 RX queues 8 TX queues
ix1: Using MSI-X interrupts with 9 vectors
ix1: allocated for 8 queues
ix1: allocated for 8 rx queues
ix1: Ethernet address: [_MAC_XXXXXXXXXX]
ix1: PCI Express Bus: Speed 5.0GT/s Width x4
ix1: eTrack 0x000118b3 PHY FW V65535
ix1: netmap queues/slots: TX 8/2048, RX 8/2048
pcib5: <ACPI PCI-PCI bridge> at device 3.0 on pci2
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xe0104000-0xe0104fff,0xe0100000-0xe0103fff irq 31 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib6: <ACPI PCI-PCI bridge> at device 4.0 on pci2
pci6: <ACPI PCI bus> on pcib6
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xe0004000-0xe0004fff,0xe0000000-0xe0003fff irq 28 at device 0.0 on pci6
re1: Using 1 MSI-X message
re1: Chip rev. 0x2c800000
re1: MAC rev. 0x00100000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: [_MAC_XXXXXXXXXX]
re1: netmap queues/slots: TX 1/256, RX 1/256
pcib7: <ACPI PCI-PCI bridge> at device 6.0 on pci2
pci7: <ACPI PCI bus> on pcib7
igb0: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xfca00000-0xfca1ffff,0xfca20000-0xfca23fff irq 30 at device 0.0 on pci7
igb0: NVM V0.4 imgtype1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib8: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2
pci8: <ACPI PCI bus> on pcib8
pci8: <unknown> at device 0.0 (no driver attached)
xhci0: <AMD Matisse USB 3.0 controller> mem 0xfc700000-0xfc7fffff irq 28 at device 0.1 on pci8
xhci0: 64 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
xhci1: <AMD Matisse USB 3.0 controller> mem 0xfc600000-0xfc6fffff irq 30 at device 0.3 on pci8
xhci1: 64 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pcib9: <PCI-PCI bridge> irq 29 at device 9.0 on pci2
pci9: <PCI bus> on pcib9
ahci0: <AMD KERNCZ AHCI SATA controller> mem 0xfc900000-0xfc9007ff irq 29 at device 0.0 on pci9
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
pcib10: <PCI-PCI bridge> irq 30 at device 10.0 on pci2
pci10: <PCI bus> on pcib10
ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfc800000-0xfc8007ff irq 30 at device 0.0 on pci10
ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich1: <AHCI channel> at channel 0 on ahci1
pcib11: <ACPI PCI-PCI bridge> at device 3.1 on pci0
pci11: <ACPI PCI bus> on pcib11
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xfcf00000-0xfcf3ffff irq 54 at device 0.0 on pci11
vgapci0: Boot video device
hdac0: <ATI R1000 HDA Controller> mem 0xfcf60000-0xfcf63fff irq 55 at device 0.1 on pci11
hdac0: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac0 attach returned 6
pcib12: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci12: <ACPI PCI bus> on pcib12
pci12: <unknown> at device 0.0 (no driver attached)
pcib13: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci13: <ACPI PCI bus> on pcib13
pci13: <unknown> at device 0.0 (no driver attached)
pci13: <encrypt/decrypt> at device 0.1 (no driver attached)
xhci2: <AMD Matisse USB 3.0 controller> mem 0xfcc00000-0xfccfffff irq 39 at device 0.3 on pci13
xhci2: 64 bytes context size, 64-bit DMA
usbus2 on xhci2
usbus2: 5.0Gbps Super Speed USB v3.0
hdac0: <AMD X570 HDA Controller> mem 0xfce00000-0xfce07fff irq 36 at device 0.4 on pci13
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounter "TSC-low" frequency 1946343599 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen2.1: <AMD XHCI root HUB> at usbus2
ugen1.1: <AMD XHCI root HUB> at usbus1
ugen0.1: <AMD XHCI root HUB> at usbus0
uhub0 on usbus2
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
uhub1 on usbus1
uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub2 on usbus0
uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
nvme0: Allocated 64MB host memory buffer
nvd0: <Netac NVMe SSD 250GB> NVMe namespace
nvd0: 238475MB (488397168 512 byte sectors)
hdacc0: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALCS1200A (Rear Analog)> at nid 20 and 24,26 on hdaa0
pcm1: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa0
hdac1: <ATI R1000 HDA Controller> mem 0xfcf60000-0xfcf63fff irq 55 at device 0.1 on pci11
hdac1: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac1 attach returned 6
Trying to mount root from zfs:zroot/ROOT/default []...
WARNING: WITNESS option enabled, expect reduced performance.
uhub0: 8 ports with 8 removable, self powered
uhub2: 10 ports with 10 removable, self powered
uhub1: 10 ports with 10 removable, self powered
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20220331/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
hdac1: <ATI R1000 HDA Controller> mem 0xfcf60000-0xfcf63fff irq 55 at device 0.1 on pci11
hdac1: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac1 attach returned 6
lo0: link state changed to UP
ix1: link state changed to UP
re0: link state changed to DOWN
re1: link state changed to DOWN
ugen1.2: <vendor 0x1a40 USB 2.0 Hub> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus1
uhub3: 4 ports with 4 removable, self powered
ugen1.3: <Compx 2.4G Wireless Receiver> at usbus1
ukbd0 on uhub3
ukbd0: <Compx 2.4G Wireless Receiver, class 0/0, rev 1.10/1.40, addr 2> on usbus1
kbd2 at ukbd0
ugen1.4: <Logitech USB Receiver> at usbus1
ukbd1 on uhub3
ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/39.06, addr 3> on usbus1
kbd3 at ukbd1
ums0 on uhub3
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/39.06, addr 3> on usbus1
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub3
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/39.06, addr 3> on usbus1
ums1 on uhub3
ums1: <Compx 2.4G Wireless Receiver, class 0/0, rev 1.10/1.40, addr 2> on usbus1
ums1: 5 buttons and [XYZT] coordinates ID=1
---<<BOOT>>---
Copyright (c) 1992-2022 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-CURRENT #0 main-n254817-bf13db086b8: Thu Apr 14 07:05:04 UTC 2022
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): resolution 640x480
CPU: AMD Ryzen 7 3800X 8-Core Processor (3892.87-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
Structured Extended Features2=0x400004<UMIP,RDPID>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x108b657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,STIBP,SSBD>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 34358689792 (32767 MB)
avail memory = 33245077504 (31704 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 12 10 13 11 4 5 1 7 3 9 14 6 2 8 15
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe
smbios0: Version: 3.2, BCD Revision: 3.2
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 1.0 on pci2
pci3: <ACPI PCI bus> on pcib3
nvme0: <Generic NVMe Device> mem 0xfcb00000-0xfcb03fff,0xfcb04000-0xfcb05fff irq 29 at device 0.0 on pci3
pcib4: <ACPI PCI-PCI bridge> at device 2.0 on pci2
pci4: <ACPI PCI bus> on pcib4
ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xe020-0xe03f mem 0xfc480000-0xfc4fffff,0xfc504000-0xfc507fff irq 30 at device 0.0 on pci4
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: queue equality override not set, capping rx_queues at 8 and tx_queues at 8
ix0: Using 8 RX queues 8 TX queues
ix0: Using MSI-X interrupts with 9 vectors
ix0: allocated for 8 queues
ix0: allocated for 8 rx queues
ix0: Ethernet address: [_MAC_XXXXXXXXXX]
ix0: PCI Express Bus: Speed 5.0GT/s Width x4
ix0: eTrack 0x000118b3 PHY FW V65535
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xe000-0xe01f mem 0xfc380000-0xfc3fffff,0xfc500000-0xfc503fff irq 31 at device 0.1 on pci4
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: queue equality override not set, capping rx_queues at 8 and tx_queues at 8
ix1: Using 8 RX queues 8 TX queues
ix1: Using MSI-X interrupts with 9 vectors
ix1: allocated for 8 queues
ix1: allocated for 8 rx queues
ix1: Ethernet address: [_MAC_XXXXXXXXXX]
ix1: PCI Express Bus: Speed 5.0GT/s Width x4
ix1: eTrack 0x000118b3 PHY FW V65535
ix1: netmap queues/slots: TX 8/2048, RX 8/2048
pcib5: <ACPI PCI-PCI bridge> at device 3.0 on pci2
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xe0104000-0xe0104fff,0xe0100000-0xe0103fff irq 31 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib6: <ACPI PCI-PCI bridge> at device 4.0 on pci2
pci6: <ACPI PCI bus> on pcib6
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xe0004000-0xe0004fff,0xe0000000-0xe0003fff irq 28 at device 0.0 on pci6
re1: Using 1 MSI-X message
re1: Chip rev. 0x2c800000
re1: MAC rev. 0x00100000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: [_MAC_XXXXXXXXXX]
re1: netmap queues/slots: TX 1/256, RX 1/256
pcib7: <ACPI PCI-PCI bridge> at device 6.0 on pci2
pci7: <ACPI PCI bus> on pcib7
igb0: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xfca00000-0xfca1ffff,0xfca20000-0xfca23fff irq 30 at device 0.0 on pci7
igb0: NVM V0.4 imgtype1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib8: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2
pci8: <ACPI PCI bus> on pcib8
pci8: <unknown> at device 0.0 (no driver attached)
xhci0: <AMD Matisse USB 3.0 controller> mem 0xfc700000-0xfc7fffff irq 28 at device 0.1 on pci8
xhci0: 64 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
xhci1: <AMD Matisse USB 3.0 controller> mem 0xfc600000-0xfc6fffff irq 30 at device 0.3 on pci8
xhci1: 64 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pcib9: <PCI-PCI bridge> irq 29 at device 9.0 on pci2
pci9: <PCI bus> on pcib9
ahci0: <AMD KERNCZ AHCI SATA controller> mem 0xfc900000-0xfc9007ff irq 29 at device 0.0 on pci9
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
pcib10: <PCI-PCI bridge> irq 30 at device 10.0 on pci2
pci10: <PCI bus> on pcib10
ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfc800000-0xfc8007ff irq 30 at device 0.0 on pci10
ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich1: <AHCI channel> at channel 0 on ahci1
pcib11: <ACPI PCI-PCI bridge> at device 3.1 on pci0
pci11: <ACPI PCI bus> on pcib11
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xfcf00000-0xfcf3ffff irq 54 at device 0.0 on pci11
vgapci0: Boot video device
hdac0: <ATI R1000 HDA Controller> mem 0xfcf60000-0xfcf63fff irq 55 at device 0.1 on pci11
hdac0: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac0 attach returned 6
pcib12: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci12: <ACPI PCI bus> on pcib12
pci12: <unknown> at device 0.0 (no driver attached)
pcib13: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci13: <ACPI PCI bus> on pcib13
pci13: <unknown> at device 0.0 (no driver attached)
pci13: <encrypt/decrypt> at device 0.1 (no driver attached)
xhci2: <AMD Matisse USB 3.0 controller> mem 0xfcc00000-0xfccfffff irq 39 at device 0.3 on pci13
xhci2: 64 bytes context size, 64-bit DMA
usbus2 on xhci2
usbus2: 5.0Gbps Super Speed USB v3.0
hdac0: <AMD X570 HDA Controller> mem 0xfce00000-0xfce07fff irq 36 at device 0.4 on pci13
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounter "TSC-low" frequency 1946343856 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen2.1: <AMD XHCI root HUB> at usbus2
ugen1.1: <AMD XHCI root HUB> at usbus1
ugen0.1: <AMD XHCI root HUB> at usbus0
uhub0 on usbus2
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
uhub1 on usbus1
uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub2 on usbus0
uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
nvme0: Allocated 64MB host memory buffer
nvd0: <Netac NVMe SSD 250GB> NVMe namespace
nvd0: 238475MB (488397168 512 byte sectors)
hdacc0: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALCS1200A (Rear Analog)> at nid 20 and 24,26 on hdaa0
pcm1: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa0
hdac1: <ATI R1000 HDA Controller> mem 0xfcf60000-0xfcf63fff irq 55 at device 0.1 on pci11
hdac1: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac1 attach returned 6
Trying to mount root from zfs:zroot/ROOT/default []...
WARNING: WITNESS option enabled, expect reduced performance.
uhub0: 8 ports with 8 removable, self powered
uhub1: 10 ports with 10 removable, self powered
uhub2: 10 ports with 10 removable, self powered
ugen1.2: <vendor 0x1a40 USB 2.0 Hub> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus1
Root mount waiting for: usbus1
uhub3: 4 ports with 4 removable, self powered
ugen1.3: <Compx 2.4G Wireless Receiver> at usbus1
ukbd0 on uhub3
ukbd0: <Compx 2.4G Wireless Receiver, class 0/0, rev 1.10/1.40, addr 2> on usbus1
kbd2 at ukbd0
ugen1.4: <Logitech USB Receiver> at usbus1
ukbd1 on uhub3
ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/39.06, addr 3> on usbus1
kbd3 at ukbd1
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20220331/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
hdac1: <ATI R1000 HDA Controller> mem 0xfcf60000-0xfcf63fff irq 55 at device 0.1 on pci11
hdac1: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac1 attach returned 6
lo0: link state changed to UP
ix1: link state changed to UP
re0: link state changed to DOWN
re1: link state changed to DOWN
ums0 on uhub3
ums0: <Compx 2.4G Wireless Receiver, class 0/0, rev 1.10/1.40, addr 2> on usbus1
ums0: 5 buttons and [XYZT] coordinates ID=1
ums1 on uhub3
ums1: <Logitech USB Receiver, class 0/0, rev 2.00/39.06, addr 3> on usbus1
ums1: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub3
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/39.06, addr 3> on usbus1
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 done
All buffers synced.
Uptime: 1m31s
---<<BOOT>>---
Copyright (c) 1992-2022 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-CURRENT #0 main-n254817-bf13db086b8: Thu Apr 14 07:05:04 UTC 2022
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): resolution 640x480
CPU: AMD Ryzen 7 3800X 8-Core Processor (3892.79-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x870f10 Family=0x17 Model=0x71 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
Structured Extended Features2=0x400004<UMIP,RDPID>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x108b657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,STIBP,SSBD>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 34358689792 (32767 MB)
avail memory = 33245077504 (31704 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 11 10 14 8 12 2 13 15 9 7 1 6 5 4 3
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe
smbios0: Version: 3.2, BCD Revision: 3.2
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 1.0 on pci2
pci3: <ACPI PCI bus> on pcib3
nvme0: <Generic NVMe Device> mem 0xfcb00000-0xfcb03fff,0xfcb04000-0xfcb05fff irq 29 at device 0.0 on pci3
pcib4: <ACPI PCI-PCI bridge> at device 2.0 on pci2
pci4: <ACPI PCI bus> on pcib4
ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xe020-0xe03f mem 0xfc480000-0xfc4fffff,0xfc504000-0xfc507fff irq 30 at device 0.0 on pci4
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: queue equality override not set, capping rx_queues at 8 and tx_queues at 8
ix0: Using 8 RX queues 8 TX queues
ix0: Using MSI-X interrupts with 9 vectors
ix0: allocated for 8 queues
ix0: allocated for 8 rx queues
ix0: Ethernet address: [_MAC_XXXXXXXXXX]
ix0: PCI Express Bus: Speed 5.0GT/s Width x4
ix0: eTrack 0x000118b3 PHY FW V65535
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xe000-0xe01f mem 0xfc380000-0xfc3fffff,0xfc500000-0xfc503fff irq 31 at device 0.1 on pci4
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: queue equality override not set, capping rx_queues at 8 and tx_queues at 8
ix1: Using 8 RX queues 8 TX queues
ix1: Using MSI-X interrupts with 9 vectors
ix1: allocated for 8 queues
ix1: allocated for 8 rx queues
ix1: Ethernet address: [_MAC_XXXXXXXXXX]
ix1: PCI Express Bus: Speed 5.0GT/s Width x4
ix1: eTrack 0x000118b3 PHY FW V65535
ix1: netmap queues/slots: TX 8/2048, RX 8/2048
pcib5: <ACPI PCI-PCI bridge> at device 3.0 on pci2
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xe0104000-0xe0104fff,0xe0100000-0xe0103fff irq 31 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib6: <ACPI PCI-PCI bridge> at device 4.0 on pci2
pci6: <ACPI PCI bus> on pcib6
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xe0004000-0xe0004fff,0xe0000000-0xe0003fff irq 28 at device 0.0 on pci6
re1: Using 1 MSI-X message
re1: Chip rev. 0x2c800000
re1: MAC rev. 0x00100000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: [_MAC_XXXXXXXXXX]
re1: netmap queues/slots: TX 1/256, RX 1/256
pcib7: <ACPI PCI-PCI bridge> at device 6.0 on pci2
pci7: <ACPI PCI bus> on pcib7
igb0: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem 0xfca00000-0xfca1ffff,0xfca20000-0xfca23fff irq 30 at device 0.0 on pci7
igb0: NVM V0.4 imgtype1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib8: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci2
pci8: <ACPI PCI bus> on pcib8
pci8: <unknown> at device 0.0 (no driver attached)
xhci0: <AMD Matisse USB 3.0 controller> mem 0xfc700000-0xfc7fffff irq 28 at device 0.1 on pci8
xhci0: 64 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
xhci1: <AMD Matisse USB 3.0 controller> mem 0xfc600000-0xfc6fffff irq 30 at device 0.3 on pci8
xhci1: 64 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pcib9: <PCI-PCI bridge> irq 29 at device 9.0 on pci2
pci9: <PCI bus> on pcib9
ahci0: <AMD KERNCZ AHCI SATA controller> mem 0xfc900000-0xfc9007ff irq 29 at device 0.0 on pci9
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
pcib10: <PCI-PCI bridge> irq 30 at device 10.0 on pci2
pci10: <PCI bus> on pcib10
ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfc800000-0xfc8007ff irq 30 at device 0.0 on pci10
ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich1: <AHCI channel> at channel 0 on ahci1
pcib11: <ACPI PCI-PCI bridge> at device 3.1 on pci0
pci11: <ACPI PCI bus> on pcib11
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xfcf00000-0xfcf3ffff irq 54 at device 0.0 on pci11
vgapci0: Boot video device
hdac0: <ATI R1000 HDA Controller> mem 0xfcf60000-0xfcf63fff irq 55 at device 0.1 on pci11
hdac0: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac0 attach returned 6
pcib12: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci12: <ACPI PCI bus> on pcib12
pci12: <unknown> at device 0.0 (no driver attached)
pcib13: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci13: <ACPI PCI bus> on pcib13
pci13: <unknown> at device 0.0 (no driver attached)
pci13: <encrypt/decrypt> at device 0.1 (no driver attached)
xhci2: <AMD Matisse USB 3.0 controller> mem 0xfcc00000-0xfccfffff irq 39 at device 0.3 on pci13
xhci2: 64 bytes context size, 64-bit DMA
usbus2 on xhci2
usbus2: 5.0Gbps Super Speed USB v3.0
hdac0: <AMD X570 HDA Controller> mem 0xfce00000-0xfce07fff irq 36 at device 0.4 on pci13
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounter "TSC-low" frequency 1946343486 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen2.1: <AMD XHCI root HUB> at usbus2
ugen0.1: <AMD XHCI root HUB> at usbus0
ugen1.1: <AMD XHCI root HUB> at usbus1
uhub0 on usbus2
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
uhub1 on usbus1
uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub2 on usbus0
uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
nvme0: Allocated 64MB host memory buffer
nvd0: <Netac NVMe SSD 250GB> NVMe namespace
nvd0: 238475MB (488397168 512 byte sectors)
hdacc0: <Realtek ALCS1200A HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALCS1200A Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALCS1200A (Rear Analog)> at nid 20 and 24,26 on hdaa0
pcm1: <Realtek ALCS1200A (Front Analog)> at nid 27 and 25 on hdaa0
hdac1: <ATI R1000 HDA Controller> mem 0xfcf60000-0xfcf63fff irq 55 at device 0.1 on pci11
hdac1: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac1 attach returned 6
Trying to mount root from zfs:zroot/ROOT/default []...
WARNING: WITNESS option enabled, expect reduced performance.
uhub0: 8 ports with 8 removable, self powered
uhub1: 10 ports with 10 removable, self powered
uhub2: 10 ports with 10 removable, self powered
Dual Console: Video Primary, Serial Secondary
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20220331/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
hdac1: <ATI R1000 HDA Controller> mem 0xfcf60000-0xfcf63fff irq 55 at device 0.1 on pci11
hdac1: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac1 attach returned 6
lo0: link state changed to UP
ix1: link state changed to UP
re0: link state changed to DOWN
re1: link state changed to DOWN