Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-04-23 06:28:50
From: yamori813
Description: Nec_WR8170N
---<<BOOT>>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.3-STABLE yamori813_modify-n234757-954660c2fd12 Nec_WR8170N mips gcc version 4.2.1 20070831 patched [FreeBSD] Preloaded elf kernel "kernel" at 0x803aa2f0. CPU: MIPS Technologies (Atheros AR7241 rev 1) processor v116.147 MMU: Standard TLB, 16 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes) L1 i-cache: 4 ways of 512 sets, 32 bytes per line L1 d-cache: 4 ways of 256 sets, 32 bytes per line L2 cache: disabled Config1=0x9ee3519e<PerfCount,WatchRegs,MIPS16,EJTAG> Config2=0x80000000 Config3=0x20<VInt> real memory = 67108864 (65536K bytes) Physical memory chunk(s): 0x00444000 - 0x03ef1fff, 61530112 bytes (15022 pages) avail memory = 60690432 (57MB) random: no preloaded entropy cache arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. hostuuid: using 00000000-0000-0000-0000-000000000000 ULE: setup cpu 0 random: entropy device external interface WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0. mem: <memory> null: <full device, null device, zero device> WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0. nexus0: <MIPS32 root nexus> argemdio0: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x19000000-0x19000fff on nexus0 mdio0: <MDIO> on argemdio0 mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0 clock0: <Generic MIPS32 ticker> on nexus0 Timecounter "MIPS32" frequency 200000000 Hz quality 800 Event timer "MIPS32" frequency 200000000 Hz quality 800 argemdio1: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x1a000000-0x1a000fff on nexus0 mdio1: <MDIO> on argemdio1 mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1 arswitch0: <Atheros AR7240 Ethernet Switch (ver 0 rev 0)> on mdio1 miibus0: <MII bus> on arswitch0 ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 ukphy0: OUI 0x00c82e, model 0x0004, rev. 1 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto miibus1: <MII bus> on arswitch0 ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 ukphy1: OUI 0x00c82e, model 0x0004, rev. 1 ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto miibus2: <MII bus> on arswitch0 ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2 ukphy2: OUI 0x00c82e, model 0x0004, rev. 1 ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto miibus3: <MII bus> on arswitch0 ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3 ukphy3: OUI 0x00c82e, model 0x0004, rev. 1 ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto mdio2: <MDIO> on arswitch0 mdioproxy2: <MII/MDIO proxy, MDIO side> on mdio2 etherswitch0: <Switch controller> on arswitch0 apb0 at irq 4 on nexus0 uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0 uart0: console (115200,n,8,1) uart0: fast interrupt uart0: PPS capture mode: DCD gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0 gpio0: [GIANT-LOCKED] gpio0: function_set: 0x1 gpio0: function_clear: 0x4 gpio0: gpio pinmask=0xc19c3 gpiobus0: <GPIO bus> on gpio0 gpioc0: <GPIO controller> on gpio0 arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0 arge0: Generating random ethernet address. miiproxy0: <MII/MDIO proxy, MII side> on arge0 miiproxy0: attached to target mdio2 arge0: finishing attachment, phymask 0010, proxy set miibus4: <MII bus> on miiproxy0 ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4 ukphy4: OUI 0x00c82e, model 0x0004, rev. 1 ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto arge0: bpf attached arge0: Ethernet address: [_MAC_XXXXXXXXXX] arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0 arge1: arge_attach: overriding MII mode to 'GMII' arge1: Generating random ethernet address. ar71xx_chip_set_mii_if: invalid MII mode (1) for unit 1 mii_attach_proxy: not attaching, no mdio device hint for arge1 arge1: finishing attachment, phymask 0000, proxy null arge1: bpf attached arge1: Ethernet address: [_MAC_XXXXXXXXXX] ehci0: <AR71XX Integrated USB 2.0 controller> at mem 0x1b000100-0x1bffffff irq 1 on nexus0 usbus0: EHCI version 1.0 usbus0 on ehci0 ehci0: usbpf: Attached pcib0 at irq 0 on nexus0 pci0: <PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x168c, dev=0xff1c, revid=0x01 domain=0, bus=0, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0146, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D3 current D0 MSI supports 1 message MSI-X supports 1 message in map 0x10 map[10]: type Memory, range 64, base 0, size 16, enabled pci0: <network, ethernet> at device 0.0 (no driver attached) spi0: <AR71XX SPI> at mem 0x1f000000-0x1fffffff on nexus0 spibus0: <SPI bus> on spi0 mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 mx25l0: device type mx25ll64, size 8192K in 128 sectors of 64K, erase size 64K ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0 ar71xx_wdog0: Previous reset was due to watchdog timeout Device configuration finished. Timecounters tick every 10.000 msec lo0: bpf attached tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024 arswitch0port1: link state changed to DOWN arswitch0port2: link state changed to DOWN arswitch0port3: link state changed to DOWN arswitch0port4: link state changed to DOWN GEOM: new disk flash/spi0 usbus0: 480Mbps High Speed USB v2.0 Trying to mount root from cd9660:/dev/map/rootfs.uzip []... MAP: flash/spi0: 0x40000, data=0x40000 "/dev/map/uboot" MAP: flash/sugen0.1: <Atheros EHCI root HUB> at usbus0 uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 pi0: 40000x10000, data=0x10000 "/dev/map/uboot_environ" MAP: flash/spi0: 50000x7a0000, data=0x7a0000 "/dev/map/upgrade" MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000 MAP: flash/spi0: 50000x100000, data=0x100000 "/dev/map/kernel" MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000 MAP: flash/spi0: 150000x690000, data=0x690000 "/dev/map/rootfs" MAP: flash/spi0: 7f0000x10000, data=0x10000 "/dev/map/ART" MAP: No valid partition found at map/rootfs.uzip cd9660: RockRidge Extension Warning: no time-of-day clock registered, system time will not be set accurately start_init: trying /sbin/init uhub0: 1 port with 1 removable, self powered MAP: No valid partition found at md0 random: unblocking device. MAP: No valid partition found at md0 lo0: link state changed to UP /tmp: optimization changed from SPACE to TIME arge0: link state changed to UP