Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2022-05-23 00:03:38
From: rin
Description: NetBSD/evbarmv5eb 9.99.96 on KURO-BOX/PRO
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018, 2019, 2020, 2021, 2022
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 9.99.96 (KBPRO_EB) #12: Sat May 21 01:58:01 JST 2022
	rin@latipes:/build/src/sys/arch/evbarm/compile/KBPRO_EB
total memory = 128 MB
avail memory = 117 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
mainbus0 (root)
cpu0 at mainbus0 core 0: ARM926EJ-S r0p0 (ARM9EJ-S V5TEJ core)
cpu0: DC enabled IC enabled WB enabled LABT
cpu0: L1 32KB/32B 1-way (1024 set) VIVT Instruction cache
cpu0: L1 32KB/32B 1-way (1024 set) write-back-locking-C VIVT Data cache
mvsoc0 at mainbus0: Marvell MV88F5182 Rev. A2  Orion1
mvsoc0: CPU Clock 400.000 MHz  SysClock 200.000 MHz  TClock 166.666 MHz
mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff irq 33: Marvell SoC Timer
mvsocgpp0 at mvsoc0 unit 0 offset 0x10100-0x101ff irq 6: Marvell SoC General Purpose I/O Port Interface
mvsocgpp0: 32 gpio pins
mvsocgpp0: interrupts 64..71, intr 6
mvsocgpp0: interrupts 72..79, intr 7
mvsocgpp0: interrupts 80..87, intr 8
mvsocgpp0: interrupts 88..95, intr 9
mvsocgpp0:   Data Out:                 	0x00000000
mvsocgpp0:   Data Out Enable Control:  	0xfc01000d
mvsocgpp0:   Data Blink Enable:        	0x00000000
mvsocgpp0:   Data In Polarity:         	0x00000000
mvsocgpp0:   Data In:                  	0x00000005
mvsocgpp0:   Interrupt Cause:          	0x00000008
mvsocgpp0:   Interrupt Mask:           	0x00000000
mvsocgpp0:   Interrupt Level Mask:     	0x00000000
gpio0 at mvsocgpp0: 32 pins
com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 3: ns16550a, 16-byte FIFO
com0: console
com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 4: ns16550a, 16-byte FIFO
ehci0 at mvsoc0 unit 0 offset 0x50000-0x50fff irq 17: Marvell USB 2.0 Interface
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
ehci1 at mvsoc0 unit 1 offset 0xa0000-0xa0fff irq 12: Marvell USB 2.0 Interface
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
gtidmac0 at mvsoc0 unit 0 offset 0x60000-0x60fff: Marvell IDMA Controller/XOR Engine
gtidmac0: IDMA Controller 4 channels, intr 24...27
gtidmac0: XOR Engine 2 channels, intr 30, 31
gtpci at mvsoc0 unit 0 not configured
gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x110ff irq 5: Marvell TWSI controller
iic0 at gttwsi0: I2C bus
rs5c372rtc0 at iic0 addr 0x32: RICOH RS5C372[AB] Real-time Clock
mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit Ethernet Controller
mvgbe0 at mvgbec0 port 0 irq 21
mvgbe0: Ethernet address [_MAC_XXXXXXXXXX]
mvgbe_jumbo_buf = 0xc8b00000
mvgbe_stop
makphy0 at mvgbe0 phy 8: Marvell 88E1116 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
mvsata0 at mvsoc0 unit 0 offset 0x80000-0x87fff irq 29: Marvell Serial-ATA Host Controller (SATAHC)
mvsata0: GenIIe, 1hc, 2port/hc
atabus0 at mvsata0 channel 0
atabus1 at mvsata0 channel 1
mvpex0 at mvsoc0 unit 0 offset 0x40000-0x41fff irq 11: Marvell PCI Express Interface
pci0 at mvpex0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
nvme0 at pci0 dev 1 function 0: vendor 2646 product 2262 (rev. 0x03)
nvme0: NVMe 1.3
nvme0: interrupting at interrupt pin INTA#
nvme0: KINGSTON SKC2500M8500G, firmware S7780101, serial 50026B7282818C65
ld0 at nvme0 nsid 1
ld0: 465 GB, 60801 cyl, 255 head, 63 sec, 512 bytes/sect x 976773168 sectors
WARNING: system needs entropy for security; see entropy(7)
timecounter: Timecounter "mvsoctmr0" frequency 166666667 Hz quality 100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub1: 1 port with 1 removable, self powered
aes: BearSSL aes_ct
chacha: Portable C ChaCha
boot device: <unknown>
root on mvgbe0
nfs_boot: trying DHCP/BOOTP
mvgbe_init
mvgbe_stop
nfs_boot: BOOTP next-server:[_IP_XXXXXXXXX]
nfs_boot: my_name=kbpro
nfs_boot: my_addr=192.168.10.186
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.10.1
root on latipes:/exports/kbpro
root file system type: nfs
kern.module.path=/stand/evbarm/9.99.96/modules