Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2022-05-25 00:07:06
From: Chicho
Description: FreeBSD 13.1-RELEASE on a Compulab fitlet2
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.1-RELEASE releng/13.1-n250148-fc952ac2212 GENERIC amd64
FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
VT(vga): resolution 640x480
CPU microcode: updated from 0x40 to 0x48
CPU: Intel(R) Atom(TM) Processor E3950 @ 1.60GHz (1593.60-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506c9  Family=0x6  Model=0x5c  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4ff8ebb7<SSE3,PCLMULQDQ,DTES64,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
  Structured Extended Features3=0x2c000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0xc79<RDCL_NO,SKIP_L1DFL_VME,SSB_NO,MDS_NO>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 3883528192 (3703 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: < >
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 2 3 1
random: entropy device external interface
kbd0 at kbdmux0
smbios0: <System Management BIOS> at iomem 0x7a027000-0x7a02701e
smbios0: Version: 3.0, BCD Revision: 3.0
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
ossl0: <OpenSSL crypto>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
Event timer "HPET1" frequency 19200000 Hz quality 440
Event timer "HPET2" frequency 19200000 Hz quality 440
Event timer "HPET3" frequency 19200000 Hz quality 440
Event timer "HPET4" frequency 19200000 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xc0000000-0xc0ffffff,0xb0000000-0xbfffffff at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Broxton-P HDA Controller> mem 0x7ffff00000-0x7ffff03fff,0x7fffe00000-0x7fffefffff irq 25 at device 14.0 on pci0
pci0: <simple comms> at device 15.0 (no driver attached)
ahci0: <Intel Apollo Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xc1210000-0xc1211fff,0xc1213000-0xc12130ff,0xc1212000-0xc12127ff at device 18.0 on pci0
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
pcib1: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem 0xc1100000-0xc111ffff,0xc1120000-0xc1123fff at device 0.0 on pci1
igb0: NVM V0.4 imgtype1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
igb0: Ethernet address: xx:xx:xx:xx:xx:xx
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: <ACPI PCI-PCI bridge> at device 19.2 on pci0
pci2: <ACPI PCI bus> on pcib2
igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem 0xc1000000-0xc101ffff,0xc1020000-0xc1023fff at device 0.0 on pci2
igb1: NVM V0.4 imgtype1
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 2 RX queues 2 TX queues
igb1: Using MSI-X interrupts with 3 vectors
igb1: Ethernet address: xx:xx:xx:xx:xx:xx
igb1: netmap queues/slots: TX 2/1024, RX 2/1024
xhci0: <Intel Apollo Lake USB 3.0 controller> mem 0xc1200000-0xc120ffff irq 17 at device 21.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
uart0: <Intel Apollo Lake SIO/LPSS UART 0> mem 0x7ffff0c000-0x7ffff0cfff,0x7ffff0b000-0x7ffff0bfff irq 4 at device 24.0 on pci0
uart1: <Intel Apollo Lake SIO/LPSS UART 1> mem 0x7ffff0a000-0x7ffff0afff,0x7ffff09000-0x7ffff09fff irq 5 at device 24.1 on pci0
uart2: <Intel Apollo Lake SIO/LPSS UART 2> mem 0xfea10000-0xfea10fff irq 6 at device 24.2 on pci0
uart2: console (115200,n,8,1)
uart3: <Intel Apollo Lake SIO/LPSS UART 3> mem 0x7ffff08000-0x7ffff08fff,0x7ffff07000-0x7ffff07fff irq 7 at device 24.3 on pci0
pci0: <serial bus> at device 26.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC" frequency 1593599764 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <Realtek ALC1150 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC1150 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC1150 (Analog 7.1+HP/2.0)> at nid 20,22,21,23,27 and 24,26 on hdaa0
pcm1: <Realtek ALC1150 (Rear Digital)> at nid 30 on hdaa0
pcm2: <Realtek ALC1150 (Front Analog Mic)> at nid 25 on hdaa0
hdacc1: <Intel Broxton HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Broxton Audio Function Group> at nid 1 on hdacc1
pcm3: <Intel Broxton (HDMI/DP 8ch)> at nid 3 on hdaa1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <M2SCF-6M 32GB Q0707A> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 30208MB (61865984 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 15 ports with 15 removable, self powered
Setting hostuuid: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx.
Setting hostid: xxxxxxxxxx.
no pools available to import
GEOM_ELI: Device gpt/swap0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: accelerated software
Starting file system checks:
/dev/gpt/efiboot0: FILESYSTEM CLEAN; SKIPPING CHECKS
Mounting local filesystems:.
Setting hostname: xxxx.
Additional TCP/IP options: TCP keepalive=NO drop SYN+FIN packets=YES IPv6 Privacy Addresses.
Setting up harvesting: PURE_RDRAND,[UMA],[FS_ATIME],SWI,[INTERRUPT],NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE
32-bit compatibility ldconfig path: /usr/lib32
Loading kernel modules:
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
Autoloading module: ichsmb
Autoloading module: ig4
ig4iic0: <Intel Apollo Lake I2C Controller-0> mem 0x7ffff1c000-0x7ffff1cfff,0x7ffff1b000-0x7ffff1bfff irq 27 at device 22.0 on pci0
ig4iic0: Using MSI
iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
ig4iic1: <Intel Apollo Lake I2C Controller-1> mem 0x7ffff1a000-0x7ffff1afff,0x7ffff19000-0x7ffff19fff irq 28 at device 22.1 on pci0
ig4iic1: Using MSI
iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1
ig4iic2: <Intel Apollo Lake I2C Controller-2> mem 0x7ffff18000-0x7ffff18fff,0x7ffff17000-0x7ffff17fff irq 29 at device 22.2 on pci0
ig4iic2: Using MSI
iicbus2: <Philips I2C bus (ACPI-hinted)> on ig4iic2
ig4iic3: <Intel Apollo Lake I2C Controller-3> mem 0x7ffff16000-0x7ffff16fff,0x7ffff15000-0x7ffff15fff irq 30 at device 22.3 on pci0
ig4iic3: Using MSI
iicbus3: <Philips I2C bus (ACPI-hinted)> on ig4iic3
ig4iic4: <Intel Apollo Lake I2C Controller-4> mem 0x7ffff14000-0x7ffff14fff,0x7ffff13000-0x7ffff13fff irq 31 at device 23.0 on pci0
ig4iic4: Using MSI
iicbus4: <Philips I2C bus (ACPI-hinted)> on ig4iic4
ig4iic5: <Intel Apollo Lake I2C Controller-5> mem 0x7ffff12000-0x7ffff12fff,0x7ffff11000-0x7ffff11fff irq 32 at device 23.1 on pci0
ig4iic5: Using MSI
iicbus5: <Philips I2C bus (ACPI-hinted)> on ig4iic5
ig4iic6: <Intel Apollo Lake I2C Controller-6> mem 0x7ffff10000-0x7ffff10fff,0x7ffff0f000-0x7ffff0ffff irq 33 at device 23.2 on pci0
ig4iic6: Using MSI
iicbus6: <Philips I2C bus (ACPI-hinted)> on ig4iic6
ig4iic7: <Intel Apollo Lake I2C Controller-7> mem 0x7ffff0e000-0x7ffff0efff,0x7ffff0d000-0x7ffff0dfff irq 34 at device 23.3 on pci0
ig4iic7: Using MSI
iicbus7: <Philips I2C bus (ACPI-hinted)> on ig4iic7
ichsmb0: <Intel Broxton SMBus controller> port 0xf040-0xf05f mem 0x7ffff04000-0x7ffff040ff at device 31.1 on pci0
smbus0: <System Management Bus> on ichsmb0
igb0: changing name to 'wan0'
wan0
igb1: changing name to 'lan0'
lan0
lo0: link state changed to UP
vlan0: changing name to 'data'
data
vlan1: changing name to 'voice'
voice
vlan2: changing name to 'guest'
guest
Starting Network: lo0 wan0 lan0 enc0.
wan0: link state changed to UP
lan0: link state changed to UP
guest: link state changed to UP
data: link state changed to UP
voice: link state changed to UP
Starting pflog.
pflog0: promiscuous mode enabled
Security policy loaded: MAC/ntpd (mac_ntpd)