Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-05-26 06:11:13
From: wtp
Description: FreeBSD/amd64 on Intel Corporation S1200SP
---<<BOOT>>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.3-STABLE n234423-14d0a20fede HQ12x64 amd64 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(efifb): resolution 1024x768 CPU: Intel(R) Xeon(R) CPU E3-1270 v6 @ 3.80GHz (3792.12-MHz K8-class CPU) Origin="GenuineIntel" Id=0x906e9 Family=0x6 Model=0x9e Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> Structured Extended Features3=0x9c002400<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 33041612800 (31510 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <INTEL S1200SPL> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 on motherboard Launching APs: 1 2 6 3 7 4 5 Timecounter "TSC-low" frequency 1896062114 Hz quality 1000 netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling random: entropy device external interface WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0. module_register_init: MOD_LOAD (vesa, 0xffffffff80881510, 0) error 19 WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0. nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard acpi0: <INTEL S1200SPL> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xa2d00000-0xa2d0ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0: waiting for BIOS to give up control xhci_interrupt: host controller halted usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms> at device 22.1 (no driver attached) ahci0: <Intel Sunrise Point AHCI SATA controller> port 0x5040-0x5047,0x5048-0x504b,0x5020-0x503f mem 0xa2d14000-0xa2d15fff,0xa2d19000-0xa2d190ff,0xa2d18000-0xa2d187ff at device 23.0 on pci0 ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahcich6: <AHCI channel> at channel 6 on ahci0 ahcich7: <AHCI channel> at channel 7 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 pcib1: <ACPI PCI-PCI bridge> at device 29.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> mem 0xa1000000-0xa1ffffff,0xa2800000-0xa2803fff,0xa2000000-0xa27fffff at device 0.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 29.2 on pci0 pci2: <ACPI PCI bus> on pcib2 igb0: <Intel(R) I210 (Copper)> port 0x4000-0x401f mem 0xa2b00000-0xa2bfffff,0xa2c00000-0xa2c03fff at device 0.0 on pci2 igb0: PHY reset is blocked due to SOL/IDER session. igb0: EEPROM V3.25-0 eTrack 0x8000065c igb0: Using 1024 TX descriptors and 1024 RX descriptors igb0: Using 4 RX queues 4 TX queues igb0: Using MSI-X interrupts with 5 vectors igb0: Ethernet address: [_MAC_XXXXXXXXXX] igb0: link state changed to UP pcib3: <ACPI PCI-PCI bridge> at device 29.3 on pci0 pci3: <ACPI PCI bus> on pcib3 igb1: <Intel(R) I210 (Copper)> port 0x3000-0x301f mem 0xa2900000-0xa29fffff,0xa2a00000-0xa2a03fff at device 0.0 on pci3 igb1: PHY reset is blocked due to SOL/IDER session. igb1: EEPROM V3.25-0 eTrack 0x8000065d igb1: Using 1024 TX descriptors and 1024 RX descriptors igb1: Using 4 RX queues 4 TX queues igb1: Using MSI-X interrupts with 5 vectors igb1: Ethernet address: [_MAC_XXXXXXXXXX] igb1: link state changed to UP isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <memory> at device 31.2 (no driver attached) acpi_button0: <Sleep Button> on acpi0 apei0: <ACPI Platform Error Interface> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 battery2: <ACPI Control Method Battery> on acpi0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec IP Filter: v5.1.2 initialized. Default = pass all, Logging = enabled ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched FQ_CODEL loaded load_dn_sched dn_sched FQ_PIE loaded load_dn_sched dn_sched PRIO loaded load_dn_sched dn_sched QFQ loaded load_dn_aqm dn_aqm CODEL loaded load_dn_aqm dn_aqm PIE loaded ugen0.1: <0x8086 XHCI root HUB> at usbus0 Trying to mount root from zfs:sys/bootenv/default []... uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 Root mount waiting for: usbus0 CAM ses0 at ahciem0 bus 0 scbus8 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <HGST HUS726020ALA610 A5GNT920> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 1907729MB (3907029168 512 byte sectors) ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <HGST HUS726020ALA610 A5GNT920> ACS-2 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 1907729MB (3907029168 512 byte sectors) ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 uhub0: 26 ports with 26 removable, self powered Root mount waiting for: usbus0 ugen0.2: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0 ukbd0 on uhub0 ukbd0: <Keyboard Interface> on usbus0 WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. kbd0 at ukbd0 ums0 on uhub0 ums0: <Mouse Interface> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0 Dual Console: Serial Primary, Video Secondary GEOM_ELI: Device gpt/swap0.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: hardware GEOM_ELI: Device gpt/swap1.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: hardware acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device device_attach: acpi_wmi0 attach returned 6 acpi_dock0: <ACPI Docking Station> on acpi0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device device_attach: acpi_wmi0 attach returned 6 lo0: link state changed to UP