Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-05-26 21:13:07
From: dive
Description: Buffalo TeraStation
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020, 2021, 2022
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.2_STABLE (PHOENIX) #0: Wed May 11 14:20:02 CDT 2022
dive@phoebe:/mnt/ram/obj/sys/arch/amd64/compile/PHOENIX
total memory = 2037 MB
avail memory = 1967 MB
rnd: seeded with 256 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.)
mainbus0 (root)
ACPI: RSDP 0x00000000000F9F30 000024 (v02 ACPIAM)
ACPI: XSDT 0x000000007F580100 000054 (v01 BUFINC WSWQ6R 20101228 MSFT 00000097)
ACPI: FACP 0x000000007F580290 0000F4 (v04 122810 FACP0918 20101228 MSFT 00000097)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20190405/tbfadt-642)
ACPI: DSDT 0x000000007F5805C0 005CE6 (v02 WSQVL WSQVL301 00000301 INTL 20051117)
ACPI: FACS 0x000000007F58E000 000040
ACPI: APIC 0x000000007F580390 00006C (v02 122810 APIC0918 20101228 MSFT 00000097)
ACPI: MCFG 0x000000007F580400 00003C (v01 122810 OEMMCFG 20101228 MSFT 00000097)
ACPI: SLIC 0x000000007F580440 000176 (v01 BUFINC WSWQ6R 20101228 MSFT 00000097)
ACPI: OEMB 0x000000007F58E040 000082 (v01 122810 OEMB0918 20101228 MSFT 00000097)
ACPI: GSCI 0x000000007F58E0D0 002024 (v01 122810 GMCHSCI 20101228 MSFT 00000097)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, id 0x106ca
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, id 0x106ca
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 1
cpu2: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, id 0x106ca
cpu2: package 0, core 0, smt 1
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, id 0x106ca
cpu3: package 0, core 1, smt 1
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <BUFINC, WSWQ6R,20101228>, AslId <MSFT,00000097>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
MCH (PNP0C01) at acpi0 not configured
attimer0 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
sysbeep0 at pcppi1
UAR2 (PNP0501) at acpi0 not configured
SIOR (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
ACPI: Enabled 2 GPEs in block 00 to 3F
attimer0: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product a000 (rev. 0x02)
agp0 at pchb0: Pineview chipset
agp0: detected 7164k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product a001 (rev. 0x02)
vendor 8086 product a002 (miscellaneous display, revision 0x02) at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0: vendor 8086 product 2940 (rev. 0x02)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 4
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
xhci0 at pci1 dev 0 function 0: vendor 1033 product 0194 (rev. 0x03)
xhci0: interrupting at msix0 vec 0
xhci0: xHCI version 0.96
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
ppb1 at pci0 dev 28 function 4: vendor 8086 product 2948 (rev. 0x02)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci2 dev 0 function 0, Yukon-2 Optima (0x1): msi1 vec 0
msk0 at mskc0 port A: Ethernet address [_MAC_XXXXXXXXXX]
makphy0 at msk0 phy 0: Marvell PHYG65G Gigabit PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 5: vendor 8086 product 294a (rev. 0x02)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 2
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
mskc1 at pci3 dev 0 function 0, Yukon-2 Optima (0x1): msi2 vec 0
msk1 at mskc1 port A: Ethernet address [_MAC_XXXXXXXXXX]
makphy1 at msk1 phy 0: Marvell PHYG65G Gigabit PHY, rev. 0
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 8086 product 2934 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 23
usb2 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 8086 product 2935 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19
usb3 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 8086 product 2936 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb4 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 8086 product 293a (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb5 at ehci0: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 8086 product 244e (rev. 0x92)
pci4 at ppb3 bus 1
pci4: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 2916 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 2922 (rev. 0x02)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 6 ports, 32 slots, CAP 0xef20ffe5<SXS,EMS,CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at msi3 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
isa0 at ichlpcib0
com0 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub5: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 2: device present, speed: 3.0Gb/s
ahcisata0 port 3: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0
wd0: <KINGSTON SA400S37240G>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 223 GB, 465141 cyl, 16 head, 63 sec, 512 bytes/sect x 468862128 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
wd1 at atabus1 drive 0
wd1: <WDC WD30EFZX-68AWUN0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 2794 GB, 5814021 cyl, 16 head, 63 sec, 512 bytes/sect x 5860533168 sectors (0 bytes/physsect; first aligned sector: 8)
wd1: GPT GUID: 87455315-e1ec-4bb5-9e67-45d9629deef6
dk0 at wd1: "11cadf71-1dad-456f-a98c-921703e79939", 5860533101 blocks at 34, type: raidframe
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
wd2 at atabus2 drive 0
wd2: <WDC WD30EFZX-68AWUN0>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 2794 GB, 5814021 cyl, 16 head, 63 sec, 512 bytes/sect x 5860533168 sectors (0 bytes/physsect; first aligned sector: 8)
wd2: GPT GUID: 901219f4-db1c-4f0c-9246-7d57020fe809
dk1 at wd2: "c2a78272-8184-462e-adae-143c6a962277", 5860533101 blocks at 34, type: raidframe
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO
wd2(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
wd3 at atabus3 drive 0
wd3: <WDC WD30EFZX-68AWUN0>
wd3: drive supports 16-sector PIO transfers, LBA48 addressing
wd3: 2794 GB, 5814021 cyl, 16 head, 63 sec, 512 bytes/sect x 5860533168 sectors (0 bytes/physsect; first aligned sector: 8)
wd3: GPT GUID: 6fc94471-2142-48bd-a626-5fefc9504eba
dk2 at wd3: "3a58d951-a4ba-4c71-8f1f-97572e409d56", 5860533101 blocks at 34, type: raidframe
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO
wd3(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
raid0: RAID Level 1
raid0: Components: /dev/dk0 /dev/dk1
raid0: Total Sectors: 5860532992 (2861588 MB)
raid0: GPT GUID: 24c0e82f-ecd5-415c-866a-0255fbbc1501
dk3 at raid0: "wdred-r1", 5860532925 blocks at 34, type: ffs
boot device: wd0
root on wd0a dumps on wd0b
kern.module.path=/stand/amd64/9.2/modules
kern info: [drm] Memory usable by graphics device = 1024M
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
kern info: [drm] initialized overlay support
i915drmkms0: info: No connectors reported connected with modes
kern info: [drm] Cannot find any crtc or sizes - going 1024x768
intelfb0 at i915drmkms0
intelfb0: framebuffer at 0xffffae8045675000, size 1024x768, depth 32, stride 4096
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)