Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-07-02 10:53:44
From: yeti
Description: Thinkpad T30, P4M@2GHz, NetBSD9.99.98
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020, 2021, 2022
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.99.98 (GENERIC) #0: Fri Jul 1 20:53:13 UTC 2022
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 2047 MB
avail memory = 1984 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000F7010 000024 (v02 IBM )
ACPI: XSDT 0x000000007FF73216 00004C (v01 IBM TP-1I 00002040 LTP 00000000)
ACPI: FACP 0x000000007FF73300 000081 (v01 IBM TP-1I 00002040 IBM 00000001)
ACPI: DSDT 0x000000007FF733E7 00AA8C (v01 IBM TP-1I 00002040 MSFT 0100000D)
ACPI: FACS 0x000000007FF7F000 000040
ACPI: SSDT 0x000000007FF733B4 000033 (v01 IBM TP-1I 00002040 MSFT 0100000D)
ACPI: ECDT 0x000000007FF7DE73 000052 (v01 IBM TP-1I 00002040 IBM 00000001)
ACPI: TCPA 0x000000007FF7DEC5 000032 (v01 IBM TP-1I 00002040 PTL 00000001)
ACPI: BOOT 0x000000007FF7DFD8 000028 (v01 IBM TP-1I 00002040 LTP 00000001)
ACPI: 2 ACPI AML tables successfully acquired and loaded
cpu0 at mainbus0
cpu0: Use lfence to serialize rdtsc
cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz, id 0xf27
cpu0: node 0, package 0, core 0, smt 0
acpi0 at mainbus0: Intel ACPICA 20211217
acpi0: X/RSDT: OemId <IBM ,TP-1I ,00002040>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 11
LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 11
LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 11
LNKC: ACPI: Found matching pin for 0.31.INTA at func 1: 255
LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 11
LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 11
LNKA: ACPI: Found matching pin for 2.0.INTA at func 0: 11
LNKB: ACPI: Found matching pin for 2.0.INTB at func 1: 11
LNKE: ACPI: Found matching pin for 2.8.INTA at func 0: 11
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
FPU (PNP0C04) at acpi0 not configured
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12
FDC (PNP0700) at acpi0 not configured
LPT (PNP0400) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
thinkpad0: version 0100
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0110): ACPI Display Output Device
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (TV0, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DVI0, 0x0210): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0110 (acpiout0): LCD Panel, head 0
acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0
acpivga0: 0x0200 (acpiout2): TV, head 0
acpivga0: 0x0210 (acpiout3): Unknown Output Device, head 0
acpitz0 at acpi0 (THM0)
acpitz0: levels: critical 94.0 C, passive 86.5 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 5.9
pms0: Passthrough, Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel 82845 Host (rev. 0x04)
agp0 at pchb0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82845 AGP (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M7 LW (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
uhci0 at pci0 dev 29 function 0: Intel 82801CA USB Controller (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: Intel 82801CA USB Controller (rev. 0x02)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: Intel 82801CA USB Controller (rev. 0x02)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x42)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cbb0 at pci2 dev 0 function 0: Texas Instruments PCI1520 PCI-CardBus Bridge (rev. 0x01)
cbb1 at pci2 dev 0 function 1: Texas Instruments PCI1520 PCI-CardBus Bridge (rev. 0x01)
fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE Network Controller (rev. 0x42)
fxp0: interrupting at irq 11
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: cacheline 0x8 lattimer 0x40
cbb0: bhlc 0x824008
cbb0: interrupting at irq 11
cardslot0 at cbb0
cardbus0 at cardslot0: bus 3
pcmcia0 at cardslot0
cbb1: cacheline 0x8 lattimer 0x40
cbb1: bhlc 0x824008
cbb1: interrupting at irq 11
cardslot1 at cbb1
cardbus1 at cardslot1: bus 6
pcmcia1 at cardslot1
ichlpcib0 at pci0 dev 31 function 0: Intel 82801CAM LPC Interface Bridge (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 2/37 seconds
ichlpcib0: SpeedStep enabled
piixide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: Intel 82801CA SMBus Controller (rev. 0x02)
ichsmb0: interrupting at irq 11
iic0 at ichsmb0: I2C bus
auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: Analog Devices AD1881A codec; headphone, Analog Devices Phat Stereo
auich0: ac97: ext id 0x1<VRA>
Intel 82801CA AC'97 Modem Controller (modem communications, revision 0x02) at pci0 dev 31 function 6 not configured
isa0 at ichlpcib0
lpt2 at isa0 port 0x3bc-0x3bf irq : polled
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
auich0: measured ac97 link rate at 47320 Hz, will use 48000 Hz
audio0 at auich0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
acpiacad0: AC adapter online.
uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
aes: Intel SSE2 bitsliced
chacha: x86 SSE2 ChaCha
acpibat0: SANYO LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
urtwn0 at uhub0 port 1
urtwn0: Realtek (0x0bda) USB WLAN (0x8178), rev 2.00/2.00, addr 2
wd0 at atabus0 drive 0
wd0: <IC25N040ATCS05-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <Slimtype DVDRW SSM-8515S, , GS09> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R, address [_MAC_XXXXXXXXXX]
urtwn0: 1 rx pipe, 2 tx pipes
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/9.99.98/modules
cd0: dos partition I/O error
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)