Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-08-07 06:52:22
From: tsutsui
Description: NetBSD/amd64 9.3 on DELL Optiplex 9010
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020, 2021, 2022
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.3 (GENERIC) #0: Thu Aug 4 15:30:37 UTC 2022
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 32654 MB
avail memory = 31683 MB
cpu_rng: RDRAND
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc. OptiPlex 9010 (01)
mainbus0 (root)
ACPI: RSDP 0x00000000000F0490 000024 (v02 DELL )
ACPI: XSDT 0x00000000D7FF3080 00007C (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0x00000000D7FFD260 00010C (v05 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0x00000000D7FF3188 00A0D6 (v02 DELL CBX3 00000022 INTL 20091112)
ACPI: FACS 0x00000000D97FE080 000040
ACPI: APIC 0x00000000D7FFD370 000092 (v03 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0x00000000D7FFD408 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: MCFG 0x00000000D7FFD450 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: HPET 0x00000000D7FFD490 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000D7FFD4C8 000415 (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000D7FFD8E0 0009B9 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000D7FFE2A0 000B22 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: DMAR 0x00000000D7FFEDC8 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: ASF! 0x00000000D7FFEE80 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: SLIC 0x00000000D7FFEF28 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 4
cpu2: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu2: package 0, core 2, smt 0
cpu3 at mainbus0 apid 6
cpu3: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu3: package 0, core 3, smt 0
cpu4 at mainbus0 apid 1
cpu4: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu4: package 0, core 0, smt 1
cpu5 at mainbus0 apid 3
cpu5: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu5: package 0, core 1, smt 1
cpu6 at mainbus0 apid 5
cpu6: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu6: package 0, core 2, smt 1
cpu7 at mainbus0 apid 7
cpu7: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu7: package 0, core 3, smt 1
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <DELL , CBX3 ,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA6768A93D008 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA6768A8CC408 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA6768A870C48 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1): not present
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout0: brightness levels: [0-100]
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: [0-100]
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout2: brightness levels: [0-100]
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout3: brightness levels: [0-100]
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout4: brightness levels: [0-100]
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout5: brightness levels: [0-100]
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout6: brightness levels: [0-100]
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpiout7: brightness levels: [0-100]
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
PDRC (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
MEM2 (PNP0C01) at acpi0 not configured
acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
wmidell0 at acpiwmi0: Dell WMI mappings version 1
acpitz0 at acpi0 (TZ00)
acpitz0: levels: critical 106.0 C, passive cooling
acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3 cpu4 cpu5 cpu6 cpu7
acpitz1: levels: critical 106.0 C, passive 106.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 3F
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0150 (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0162 (rev. 0x09)
xhci0 at pci0 dev 20 function 0: vendor 8086 product 1e31 (rev. 0x04)
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 1e3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
wm0 at pci0 dev 25 function 0, 64-bit DMA: PCH2 LAN (82579LM) Controller (rev. 0x04)
wm0: interrupting at msi1 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH, version 0.13.4
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: 0x6a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL,EEE>
ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: vendor 8086 product 1e2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi2 vec 0
hdafg0 at hdaudio0: vendor 10ec product 0269
hdafg0: DAC00 2ch: Speaker [Built-In]
hdafg0: DAC01 2ch: Speaker [Jack], HP Out [Jack]
hdafg0: ADC02 2ch: Mic In [Jack]
hdafg0: ADC03 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
hdafg1 at hdaudio0: vendor 8086 product 2806
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: DP01 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ehci1 at pci0 dev 29 function 0: vendor 8086 product 1e26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb3 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 1e47 (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 1e02 (rev. 0x04)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc730ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
ahcisata0: interrupting at msi3 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 1e22 (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed40fff irq 7
tpm0: device 0x0000104a rev 0x4e
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
wsbell at spkr1 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 59 us, pow 500 mW
acpicpu0: C3: FFH, lat 80 us, pow 350 mW
acpicpu0: P0: FFH, lat 10 us, pow 77000 mW, 3401 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 77000 mW, 3400 MHz
acpicpu0: P2: FFH, lat 10 us, pow 73840 mW, 3300 MHz
acpicpu0: P3: FFH, lat 10 us, pow 67694 mW, 3100 MHz
acpicpu0: P4: FFH, lat 10 us, pow 64705 mW, 3000 MHz
acpicpu0: P5: FFH, lat 10 us, pow 61772 mW, 2900 MHz
acpicpu0: P6: FFH, lat 10 us, pow 58907 mW, 2800 MHz
acpicpu0: P7: FFH, lat 10 us, pow 53315 mW, 2600 MHz
acpicpu0: P8: FFH, lat 10 us, pow 50601 mW, 2500 MHz
acpicpu0: P9: FFH, lat 10 us, pow 47940 mW, 2400 MHz
acpicpu0: P10: FFH, lat 10 us, pow 42787 mW, 2200 MHz
acpicpu0: P11: FFH, lat 10 us, pow 40284 mW, 2100 MHz
acpicpu0: P12: FFH, lat 10 us, pow 37833 mW, 2000 MHz
acpicpu0: P13: FFH, lat 10 us, pow 35433 mW, 1900 MHz
acpicpu0: P14: FFH, lat 10 us, pow 31421 mW, 1700 MHz
acpicpu0: P15: FFH, lat 10 us, pow 29164 mW, 1600 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=105
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=105
acpicpu4 at cpu4: ACPI CPU
acpicpu5 at cpu5: ACPI CPU
acpicpu6 at cpu6: ACPI CPU
acpicpu7 at cpu7: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3392559320 Hz quality 3000
uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 4 ports with 4 removable, self powered
IPsec: Initialized Security Association Processing.
uhub2 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
tpm0: bad tpm response: tag=196 len=10 code=38
tpm0: deactivating entropy source
ahcisata0 port 0: device present, speed: 6.0Gb/s
ahcisata0 port 1: device present, speed: 6.0Gb/s
ahcisata0 port 2: device present, speed: 1.5Gb/s
uhub4 at uhub1 port 4: vendor 05e3 (0x5e3) USB2.0 Hub (0x608), class 9/0, rev 2.00/77.61, addr 1
uhub4: single transaction translator
uhub4: 4 ports with 4 removable, self powered
wd0 at atabus0 drive 0
wd0: <TS1TSSD230S>
wd0: drive supports 2-sector PIO transfers, LBA48 addressing
wd0: 953 GB, 1984533 cyl, 16 head, 63 sec, 512 bytes/sect x 2000409264 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
wd1 at atabus1 drive 0
wd1: <Seagate BarraCuda SSD ZA500CM10002>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
atapibus0 at atabus2: 1 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVD+-RW GT80N, KZMCCJB3313, A103> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub5 at uhub2 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub5: single transaction translator
uhub6 at uhub3 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub6: single transaction translator
uhub5: 6 ports with 6 removable, self powered
uhub6: 8 ports with 8 removable, self powered
uhidev0 at uhub4 port 2 configuration 1 interface 0
uhidev0: Logitech (0x46d) USB Laser Mouse (0xc062), rev 2.00/31.00, addr 2, iclass 3/1
ums0 at uhidev0: 8 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
uhidev1 at uhub4 port 3 configuration 1 interface 0
uhidev1: SIGMACHIP (0x1c4f) USB Keyboard (0x02), rev 1.10/1.10, addr 3, iclass 3/1
ukbd0 at uhidev1
umass0 at uhub5 port 4 configuration 1 interface 0
umass0: I-O DATA (0x4bb) USB Flash Disk (0xca7), rev 2.00/11.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <I-O DATA, USB Flash Disk, 1100> disk removable
sd0: 3824 MB, 7872 cyl, 16 head, 63 sec, 512 bytes/sect x 7831552 sectors
sd0: GPT GUID: 5cc289f3-e543-422c-9f42-6147b215224c
dk0 at sd0: "EFI system", 262144 blocks at 2048, type: msdos
dk1 at sd0: "db37546e-5181-45dd-b56a-5e623cb75e83", 2908160 blocks at 264192, type: ffs
wskbd1 at ukbd0 mux 1
uhidev2 at uhub4 port 3 configuration 1 interface 1
uhidev2: SIGMACHIP (0x1c4f) USB Keyboard (0x02), rev 1.10/1.10, addr 3, iclass 3/0
uhidev2: 2 report ids
uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
boot device: wd0
root on wd0f dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/9.3/modules
kern info: [drm] Memory usable by graphics device = 2048M
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
kern info: [drm] failed to find VBIOS tables
i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
intelfb0 at i915drmkms0
intelfb0: framebuffer at 0xffffb30259c74000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)