Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-08-18 18:18:27
From: marcin.mfm
Description: Soekris net6501-70 FreeBSD-13.1-RELEASE i386
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.1-RELEASE-p1 GENERIC i386 FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) VT(vga): resolution 640x480 CPU: Genuine Intel(R) CPU @ 1.60GHz (1600.07-MHz 686-class CPU) Origin="GenuineIntel" Id=0x20661 Family=0x6 Model=0x26 Stepping=1 Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x40e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> VT-x: (disabled in BIOS) HLT,PAUSE TSC: P-state invariant, performance statistics real memory = 2147352576 (2047 MB) avail memory = 2080919552 (1984 MB) MPTable: <Soekris net6501 > Event timer "LAPIC" quality 100 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 hardware threads random: unblocking device. ioapic0: Assuming intbase of 0 ioapic0 <Version 2.0> irqs 0-23 Launching APs: 1 random: entropy device external interface kbd0 at kbdmux0 Firmware Error (ACPI): A valid RSDP was not found (20201113/tbxfroot-369) ACPI: Table initialisation failed: AE_NOT_FOUND ACPI: Try disabling either ACPI or apic support. vtvga0: <VT VGA driver> aesni0: No AES or SHA support. pcib0: <MPTable Host-PCI bridge> pcibus 0 pci0: <PCI bus> on pcib0 pcib1: <PCI-PCI bridge> irq 16 at device 23.0 on pci0 pci1: <PCI bus> on pcib1 pcib2: <PCI-PCI bridge> irq 16 at device 0.0 on pci1 pci2: <PCI bus> on pcib2 pci2: <unknown> at device 0.0 (no driver attached) pci2: <network, ethernet> at device 0.1 (no driver attached) pci2: <unknown> at device 0.2 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xa0000b00-0xa0000bff irq 19 at device 2.0 on pci2 usbus0 on ohci0 usbus0: 12Mbps Full Speed USB v1.0 ohci1: <OHCI (generic) USB controller> mem 0xa0000c00-0xa0000cff irq 19 at device 2.1 on pci2 usbus1 on ohci1 usbus1: 12Mbps Full Speed USB v1.0 ohci2: <OHCI (generic) USB controller> mem 0xa0000d00-0xa0000dff irq 19 at device 2.2 on pci2 usbus2 on ohci2 usbus2: 12Mbps Full Speed USB v1.0 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xa0000e00-0xa0000eff irq 19 at device 2.3 on pci2 usbus3: EHCI version 1.0 usbus3 on ehci0 usbus3: 480Mbps High Speed USB v2.0 pci2: <serial bus, USB> at device 2.4 (no driver attached) sdhci_pci0: <Generic SD HCI> mem 0xa0004000-0xa00041ff irq 18 at device 4.0 on pci2 sdhci_pci0: 1 slot(s) allocated sdhci_pci1: <Generic SD HCI> mem 0xa0004200-0xa00043ff irq 18 at device 4.1 on pci2 sdhci_pci1: 1 slot(s) allocated ahci0: <AHCI SATA controller> port 0x1020-0x103f mem 0xa0004400-0xa00047ff irq 17 at device 6.0 on pci2 ahci0: AHCI v1.10 with 2 3Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ohci3: <OHCI (generic) USB controller> mem 0xa0004800-0xa00048ff irq 16 at device 8.0 on pci2 usbus4 on ohci3 usbus4: 12Mbps Full Speed USB v1.0 ohci4: <OHCI (generic) USB controller> mem 0xa0004900-0xa00049ff irq 16 at device 8.1 on pci2 usbus5 on ohci4 usbus5: 12Mbps Full Speed USB v1.0 ohci5: <OHCI (generic) USB controller> mem 0xa0004a00-0xa0004aff irq 16 at device 8.2 on pci2 usbus6 on ohci5 usbus6: 12Mbps Full Speed USB v1.0 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xa0004b00-0xa0004bff irq 16 at device 8.3 on pci2 usbus7: EHCI version 1.0 usbus7 on ehci1 usbus7: 480Mbps High Speed USB v2.0 pci2: <unknown> at device 10.0 (no driver attached) uart2: <Intel EG20T Serial Port 0> port 0x1040-0x1047 mem 0xa0004d00-0xa0004d0f irq 19 at device 10.1 on pci2 uart2: Using 1 MSI message uart3: <Intel EG20T Serial Port 1> port 0x1048-0x104f mem 0xa0004d10-0xa0004d1f irq 19 at device 10.2 on pci2 uart3: Using 1 MSI message uart4: <Intel EG20T Serial Port 2> port 0x1050-0x1057 mem 0xa0004d20-0xa0004d2f irq 19 at device 10.3 on pci2 uart4: Using 1 MSI message uart5: <Intel EG20T Serial Port 3> port 0x1058-0x105f mem 0xa0004d30-0xa0004d3f irq 19 at device 10.4 on pci2 uart5: Using 1 MSI message pci2: <unknown> at device 12.0 (no driver attached) pci2: <serial bus> at device 12.1 (no driver attached) pci2: <serial bus> at device 12.2 (no driver attached) pci2: <serial bus> at device 12.3 (no driver attached) pci2: <unknown> at device 12.4 (no driver attached) pcib3: <PCI-PCI bridge> irq 17 at device 24.0 on pci0 pci3: <PCI bus> on pcib3 pcib4: <PCI-PCI bridge> at device 0.0 on pci3 pci4: <PCI bus> on pcib4 pcib5: <PCI-PCI bridge> at device 2.0 on pci4 pci5: <PCI bus> on pcib5 em0: <Intel(R) Gigabit CT 82574L> port 0x2000-0x201f mem 0xa1000000-0xa101ffff,0xa1020000-0xa1023fff irq 19 at device 0.0 on pci5 em0: EEPROM V2.1-2 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using 1 RX queues 1 TX queues em0: Using MSI-X interrupts with 2 vectors em0: Ethernet address: pcib6: <PCI-PCI bridge> at device 3.0 on pci4 pci6: <PCI bus> on pcib6 em1: <Intel(R) Gigabit CT 82574L> port 0x3000-0x301f mem 0xa2000000-0xa201ffff,0xa2020000-0xa2023fff irq 16 at device 0.0 on pci6 em1: EEPROM V2.1-2 em1: Using 1024 TX descriptors and 1024 RX descriptors em1: Using 1 RX queues 1 TX queues em1: Using MSI-X interrupts with 2 vectors em1: Ethernet address: pcib7: <PCI-PCI bridge> at device 4.0 on pci4 pci7: <PCI bus> on pcib7 pcib8: <PCI-PCI bridge> irq 18 at device 25.0 on pci0 pci8: <PCI bus> on pcib8 pcib9: <PCI-PCI bridge> at device 0.0 on pci8 pci9: <PCI bus> on pcib9 pcib10: <PCI-PCI bridge> at device 2.0 on pci9 pci10: <PCI bus> on pcib10 em2: <Intel(R) Gigabit CT 82574L> port 0x4000-0x401f mem 0xa3000000-0xa301ffff,0xa3020000-0xa3023fff irq 16 at device 0.0 on pci10 em2: EEPROM V2.1-2 em2: Using 1024 TX descriptors and 1024 RX descriptors em2: Using 1 RX queues 1 TX queues em2: Using MSI-X interrupts with 2 vectors em2: Ethernet address: pcib11: <PCI-PCI bridge> at device 3.0 on pci9 pci11: <PCI bus> on pcib11 em3: <Intel(R) Gigabit CT 82574L> port 0x5000-0x501f mem 0xa4000000-0xa401ffff,0xa4020000-0xa4023fff irq 17 at device 0.0 on pci11 em3: EEPROM V2.1-2 em3: Using 1024 TX descriptors and 1024 RX descriptors em3: Using 1 RX queues 1 TX queues em3: Using MSI-X interrupts with 2 vectors em3: Ethernet address: pcib12: <PCI-PCI bridge> at device 4.0 on pci9 pci12: <PCI bus> on pcib12 pcib13: <PCI-PCI bridge> irq 19 at device 26.0 on pci0 pci13: <PCI bus> on pcib13 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 cpu0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 coretemp0: Can not get Tj(target) from your CPU, using 100C. est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 61110180600101a device_attach: est0 attach returned 6 cpu1 coretemp1: Can not get Tj(target) from your CPU, using 100C. est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 61110180600101a device_attach: est1 attach returned 6 ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0 ata1: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. Firmware Error (ACPI): A valid RSDP was not found (20201113/tbxfroot-369) Firmware Error (ACPI): A valid RSDP was not found (20201113/tbxfroot-369) atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. attimer0: <AT timer> at port 0x40 on isa0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 attimer0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. ppc0: parallel port not found. uart0: <Non-standard ns8250 class UART with FIFOs> at port 0x3f8 irq 4 flags 0x10 on isa0 uart0: console (115200,n,8,1) uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. Timecounter "TSC" frequency 1600000396 Hz quality 1000 Timecounters tick every 1.000 msec ugen1.1: <(0x8086) OHCI root HUB> at usbus1 ugen7.1: <Intel EHCI root HUB> at usbus7 uhub0 on usbus1 uhub0: <(0x8086) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub1 on usbus7 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 ugen6.1: <(0x8086) OHCI root HUB> at usbus6 ugen4.1: <(0x8086) OHCI root HUB> at usbus4 uhub2 on usbus6 uhub2: <(0x8086) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 uhub3 on usbus4 uhub3: <(0x8086) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen2.1: <(0x8086) OHCI root HUB> at usbus2 ugen5.1: <(0x8086) OHCI root HUB> at usbus5 uhub4 on usbus2 uhub4: <(0x8086) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 uhub5 on usbus5 uhub5: <(0x8086) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen0.1: <(0x8086) OHCI root HUB> at usbus0 ugen3.1: <Intel EHCI root HUB> at usbus3 uhub6 on usbus0 uhub7 on usbus3 uhub6: <(0x8086) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 Trying to mount root from ufs:/dev/ada0p2 [rw]... ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <KINGSTON SKC600MS256G S4800105> ACS-3 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 244198MB (500118192 512 byte sectors) uhub0: 1 port with 1 removable, self powered uhub2: 1 port with 1 removable, self powered uhub4: 1 port with 1 removable, self powered uhub3: 1 port with 1 removable, self powered uhub5: 1 port with 1 removable, self powered uhub6: 1 port with 1 removable, self powered Root mount waiting for: usbus3 usbus7 uhub1: 3 ports with 3 removable, self powered uhub7: 3 ports with 3 removable, self powered WARNING: / was not properly dismounted Dual Console: Serial Primary, Video Secondary lo0: link state changed to UP em0: link state changed to UP ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled Security policy loaded: MAC/ntpd (mac_ntpd)