Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-09-19 14:21:53
From: tsutsui
Description: NetBSD/zaurus 9.3 on SHARP Zaurus SL-C760
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020, 2021, 2022
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.3 (GENERIC) #0: Thu Aug 4 15:30:37 UTC 2022
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/zaurus/compile/GENERIC
total memory = 65536 KB
avail memory = 57924 KB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0 core 0: PXA255/26x step A-0 (XScale V5TE core)
cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
cpu0: 32KB/32B 32-way L1 VIVT Instruction cache
cpu0: 32KB/32B 32-way write-back-locking L1 VIVT Data cache
pxaip0 at mainbus0: Onchip Peripheral Bus
pxaip0: CPU clock = 398.091 MHz
pxaip0: kernel is configured for PXA250 and PXA270, cpu type is PXA250
pxaintc0 at pxaip0 addr 0x40d00000-0x40d0001f: Interrupt Controller
pxagpio0 at pxaip0 addr 0x40e00000-0x40e0014f: GPIO Controller
pxagpio0: no GPIO configured in kernel
com0 at pxaip0 addr 0x40100000-0x4010001f intr 22: ns16550a, working fifo
com1 at pxaip0 addr 0x40200000-0x4020001f intr 21: ns16550a, working fifo
com2 at pxaip0 addr 0x40700000-0x4070001f intr 20: ns16550a, working fifo
saost0 at pxaip0 addr 0x40a00000-0x40a0001f
saost0: SA-11x0 OS Timer
pxadmac0 at pxaip0 addr 0x40000000-0x400002ff intr 25: DMA Controller
pxapcic0 at pxaip0: 1 slot
pcmcia0 at pxapcic0
pxartc0 at pxaip0 addr 0x40900000-0x4090000f: Real-time Clock
pxamci0 at pxaip0 addr 0x41100000-0x41100047: MMC/SD Controller
pxamci0: using DMA transfer
sdmmc0 at pxamci0
ziic0 at pxaip0 addr 0x40300000-0x403016a3: I2C controller
iic0 at ziic0: I2C bus
zaudio0 at iic0 addr 0x1b: I2S, WM8731 Audio
audio0 at zaudio0: playback, capture, half duplex
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
scoop0 at pxaip0: PCMCIA/GPIO controller
zssp0 at pxaip0
lcdctl0 at zssp0
ztp0 at zssp0
wsmouse0 at ztp0 mux 0
w100lcd0 at pxaip0: ATI Imageon100 LCD controller
w100lcd0: console
wsdisplay0 at w100lcd0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
zkbd0 at pxaip0
wskbd0 at zkbd0: console keyboard, using wsdisplay0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
clock: hz=100 stathz=64
timecounter: Timecounter "saost_count" frequency 3686400 Hz quality 100
wdc0 at pcmcia0 function 0: <TRANSCEND, TS8GCF133, >
wdc0: i/o mapped mode
ld0 at sdmmc0: <0x74:0x4a60:USDU1:0x20:0x39003eca:0x0fc>
ld0: 30560 MB, 7761 cyl, 128 head, 63 sec, 512 bytes/sect x 62586880 sectors
ld0: 1-bit width, 20.000 MHz
atabus0 at wdc0 channel 0
wd0 at atabus0 drive 0
wd0: <TS8GCF133>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 7647 MB, 15538 cyl, 16 head, 63 sec, 512 bytes/sect x 15662304 sectors
wd0: drive supports PIO mode 4boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
kern.module.path=/stand/zaurus/9.3/modules