Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-10-03 14:27:58
From: mochid
Description: NetBSD/evbarm aarch64 9.99.100 UEFI-acpi Raspberry Pi CM4, Waveshare CM4-IO-BASE-B
UEFI firmware (version UEFI Firmware v1.33 built at 17:06:11 on Mar 7 2022)
\\-__,------,___.
\\ __,---` NetBSD/evbarm efiboot (arm64)
\\ `---,_. Revision 2.13 (Fri Sep 23 12:35:00 UTC 2022)
\\-,_____,.---`
\\
\\
\\
Press return to boot now, any other key for boot prompt
booting netbsd - starting in 5 seconds.
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.0000000] 2018, 2019, 2020, 2021, 2022
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 9.99.100 (GENERIC64) #0: Fri Sep 30 14:32:45 UTC 2022
[ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/GENERIC64
[ 1.0000000] total memory = 3928 MB
[ 1.0000000] avail memory = 3786 MB
[ 1.0000000] entropy: ready
[ 1.0000000] armfdt0 (root)
[ 1.0000000] armfdt0: using EFI runtime services for RTC
[ 1.0000000] simplebus0 at armfdt0: Raspberry Pi Foundation Raspberry Pi Compute Module 4
[ 1.0000000] simplebus1 at simplebus0
[ 1.0000000] acpifdt0 at simplebus0
[ 1.0000000] acpifdt0: SMBIOS rev. 3.3.0 @ 0x371d0000
[ 1.0000000] ACPI: RSDP 0x0000000033B20018 000024 (v02 RPIFDN)
[ 1.0000000] ACPI: XSDT 0x0000000033B2FE98 000074 (v01 RPIFDN RPI4 00000200 01000013)
[ 1.0000000] ACPI: FACP 0x0000000033B2E998 000114 (v06 RPIFDN RPI4 00000200 EDK2 00000300)
[ 1.0000000] ACPI: DSDT 0x0000000033B27518 0022D9 (v02 RPIFDN RPI 00000002 INTL 20190509)
[ 1.0000000] ACPI: CSRT 0x0000000033B2FA98 000169 (v00 RPIFDN RPI4 00000200 EDK2 00000300)
[ 1.0000000] ACPI: DBG2 0x0000000033B2FD18 000061 (v00 RPIFDN RPI4 00000200 EDK2 00000300)
[ 1.0000000] ACPI: GTDT 0x0000000033B2F998 000068 (v03 RPIFDN RPI4 00000200 EDK2 00000300)
[ 1.0000000] ACPI: IORT 0x0000000033B2F598 0000B7 (v00 RPIFDN RPI4 00000200 EDK2 00000300)
[ 1.0000000] ACPI: APIC 0x0000000033B2F698 000184 (v05 RPIFDN RPI4 00000200 EDK2 00000300)
[ 1.0000000] ACPI: PPTT 0x0000000033B2EB18 000184 (v02 RPIFDN RPI4 00000200 EDK2 00000300)
[ 1.0000000] ACPI: SPCR 0x0000000033B2F918 000050 (v02 RPIFDN RPI4 00000200 EDK2 00000300)
[ 1.0000000] ACPI: SSDT 0x0000000033B2ED98 000277 (v02 RPIFDN RPI4EMMC 00000002 INTL 20190509)
[ 1.0000000] ACPI: SSDT 0x0000000033B2A198 000294 (v05 RPIFDN RPI4PCIE 00000002 INTL 20190509)
[ 1.0000000] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 1.0000000] acpi0 at acpifdt0: Intel ACPICA 20220331
[ 1.0000000] acpi0: SMCCC: PCI impl. version 1.0
[ 1.0000000] acpi0: SMCCC: segment 0, bus 0-255
[ 1.0000000] cpu0 at acpi0: Arm Cortex-A72 r0p3 (v8-A), id 0x0
[ 1.0000000] cpu0: package 0, core 0, smt 0
[ 1.0000000] cpu1 at acpi0: Arm Cortex-A72 r0p3 (v8-A), id 0x1
[ 1.0000000] cpu1: package 0, core 1, smt 0
[ 1.0000000] cpu2 at acpi0: Arm Cortex-A72 r0p3 (v8-A), id 0x2
[ 1.0000000] cpu2: package 0, core 2, smt 0
[ 1.0000000] cpu3 at acpi0: Arm Cortex-A72 r0p3 (v8-A), id 0x3
[ 1.0000000] cpu3: package 0, core 3, smt 0
[ 1.0000000] gic0 at acpi0: GIC
[ 1.0000000] armgic0 at gic0: Generic Interrupt Controller, 256 sources (247 valid)
[ 1.0000000] armgic0: 16 Priorities, 224 SPIs, 7 PPIs, 16 SGIs
[ 1.0000000] gtmr0 at acpi0: irq 27
[ 1.0000000] armgtmr0 at gtmr0: Generic Timer (54000 kHz, virtual)
[ 1.0000040] PEPD (BCM2854) at acpi0 not configured
[ 1.0000040] CPU0 (ACPI0007) at acpi0 not configured
[ 1.0000040] CPU1 (ACPI0007) at acpi0 not configured
[ 1.0000040] CPU2 (ACPI0007) at acpi0 not configured
[ 1.0000040] CPU3 (ACPI0007) at acpi0 not configured
[ 1.0000040] USB0 (BCM2848) at acpi0 not configured
[ 1.0000040] GPU0 (BCM2850) at acpi0 not configured
[ 1.0000040] bcmmbox0 at acpi0 (RPIQ, BCM2849-0): mem 0xfe00b880-0xfe00b8a3 irq 65
[ 1.0000040] vcmbox0 at bcmmbox0
[ 1.0000040] VCIQ (BCM2835) at acpi0 not configured
[ 1.0000040] VCSM (BCM2856) at acpi0 not configured
[ 1.0000040] GPI0 (BCM2845) at acpi0 not configured
[ 1.0000040] bsciic0 at acpi0 (I2C1, BCM2841-1): mem 0xfe804000-0xfe80401f irq 149
[ 1.0000040] iic0 at bsciic0: I2C bus
[ 1.0000040] bsciic1 at acpi0 (I2C2, BCM2841-2): mem 0xfe805000-0xfe80501f irq 149
[ 1.0000040] iic1 at bsciic1: I2C bus
[ 1.0000040] SPI0 (BCM2838) at acpi0 not configured
[ 1.0000040] SPI1 (BCM2839) at acpi0 not configured
[ 1.0000040] PWM0 (BCM2844) at acpi0 not configured
[ 1.0000040] plcom0 at acpi0 (URT0, BCM2837-4): mem 0xfe201000-0xfe201fff irq 153
[ 1.0000040] plcom0: console
[ 1.0000040] com0 at acpi0 (URTM, BCM2836-0): mem 0xfe215000-0xfe21506f irq 125
[ 1.0000040] com0: BCM AUX UART, 1-byte FIFO
[ 1.0000040] BTH0 (BCM2EA6) at acpi0 not configured
[ 1.0000040] RHPX (MSFT8000) at acpi0 not configured
[ 1.0000040] sdhc0 at acpi0 (SDC1, BCM2847-0): mem 0xfe300000-0xfe3000ff irq 158
[ 1.0000040] genet0 at acpi0 (ETH0, BCM6E4E-0): mem 0xfd580000-0xfd58ffff irq 189,190
[ 1.0000040] genet0: GENETv5.0
[ 1.0000040] genet0: Ethernet address dc:a6:32:xx:xx:xx
[ 1.0000040] brgphy0 at genet0 phy 0: BCM54213PE 1000BASE-T media interface, rev. 2
[ 1.0000040] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000040] EC00 (PNP0C06) at acpi0 not configured
[ 1.0000040] acpitz0 at acpi0 (TZ00): cpu0 cpu1 cpu2 cpu3
[ 1.0000040] sdhc1 at acpi0 (SDC3, BRCME88C-1): mem 0xfe340000-0xfe3400ff irq 158
[ 1.0000040] acpipchb0 at acpi0 (PCI0, PNP0A08): PCI Express Host Bridge
[ 1.0000040] pci0 at acpipchb0 bus 0
[ 1.0000040] ppb0 at pci0 dev 0 function 0: vendor 14e4 product 2711 (rev. 0x20)
[ 1.0000040] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.0000040] pci1 at ppb0 bus 1
[ 1.0000040] sdhc0: SDHC 3.0, rev 153, PIO, 250000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
[ 1.0000040] sdmmc0 at sdhc0 slot 0
[ 1.0000040] sdhc1: SDHC 3.0, rev 16, PIO, 100000 kHz, embedded slot, HS 3.3V, re-tuning mode 3, 2048 byte blocks
[ 1.0000040] sdmmc1 at sdhc1 slot 0
[ 1.3465694] cpu0: PMU interrupting on irq 48
[ 1.3465694] cpu1: PMU interrupting on irq 49
[ 1.3465694] cpu2: PMU interrupting on irq 50
[ 1.3565709] cpu3: PMU interrupting on irq 51
[ 1.5284614] sdmmc1: SD card status: 4-bit, C10, A1
[ 1.5373760] ld1 at sdmmc1: <0x03:0x5344:ABLCD:0x80:0x2c8d2a28:0x112>
[ 1.5373760] ld1: 30436 MB, 7729 cyl, 128 head, 63 sec, 512 bytes/sect x 62333952 sectors
[ 1.5473763] dk0 at ld1: "EFI", 163840 blocks at 3, type: msdos
[ 1.5573766] dk1 at ld1: "netbsd-root", 62169088 blocks at 163843, type: ffs
[ 1.5573766] ld1: 4-bit width, High-Speed/SDR25, 50.000 MHz
[ 1.5873768] sdmmc0: 4-bit width, 50.000 MHz
[ 1.5979715] sdmmc0: SDIO function
[ 1.5979715] bwfm0 at sdmmc0 function 1
[ 1.5979715] (manufacturer 0x2d0, product 0xa9a6) at sdmmc0 function 2 not configured
[ 1.6081244] (manufacturer 0x2d0, product 0xa9a6, standard function interface code 0x2) at sdmmc0 function 3 not configured
[ 1.6203583] swwdog0: software watchdog initialized
[ 1.6281244] boot device: dk1
[ 1.6281244] root on dk1
[ 1.6381244] root file system type: ffs
[ 1.6381244] kern.module.path=/stand/evbarm/9.99.100/modules
[ 1.6381244] WARNING: clock lost 208 days
[ 1.6481252] WARNING: using filesystem time
[ 1.6559617] WARNING: CHECK AND RESET THE DATE!
[ 1.6559617] bwfm0: Firmware file not available
[ 1.6648147] bwfm0: NVRAM file not available
/etc/rc.conf is not configured. Multiuser boot aborted.
Enter pathname of shell or RETURN for /bin/sh:
We recommend that you create a non-root account and use su(1) for root access.
#