Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-10-03 14:37:57
From: mochid
Description: NetBSD/evbarm aarch64 9.99.100 UEFI-fdt Raspberry Pi CM4, Waveshare CM4-IO-BASE-B
UEFI firmware (version UEFI Firmware v1.33 built at 17:06:11 on Mar 7 2022)
\\-__,------,___.
\\ __,---` NetBSD/evbarm efiboot (arm64)
\\ `---,_. Revision 2.13 (Fri Sep 23 12:35:00 UTC 2022)
\\-,_____,.---`
\\
\\
\\
Press return to boot now, any other key for boot prompt
booting netbsd - starting in 5 seconds.
[ 1.0000000] NetBSD/evbarm (fdt) booting ...
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.0000000] 2018, 2019, 2020, 2021, 2022
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 9.99.100 (GENERIC64) #0: Fri Sep 30 14:32:45 UTC 2022
[ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/GENERIC64
[ 1.0000000] total memory = 3928 MB
[ 1.0000000] avail memory = 3786 MB
[ 1.0000000] entropy: ready
[ 1.0000000] armfdt0 (root)
[ 1.0000000] armfdt0: using EFI runtime services for RTC
[ 1.0000000] simplebus0 at armfdt0: Raspberry Pi Compute Module 4 Rev 1.0
[ 1.0000000] simplebus1 at simplebus0
[ 1.0000000] simplebus2 at simplebus0
[ 1.0000000] cpus0 at simplebus0
[ 1.0000000] simplebus3 at simplebus0
[ 1.0000000] simplebus4 at simplebus0
[ 1.0000000] simplebus5 at simplebus0
[ 1.0000000] psci0 at simplebus0: PSCI 1.1
[ 1.0000000] simplebus6 at simplebus0
[ 1.0000000] cpu0 at cpus0: Arm Cortex-A72 r0p3 (v8-A), id 0x0
[ 1.0000000] cpu0: package 0, core 0, smt 0
[ 1.0000000] cpu1 at cpus0: Arm Cortex-A72 r0p3 (v8-A), id 0x1
[ 1.0000000] cpu1: package 0, core 1, smt 0
[ 1.0000000] cpu2 at cpus0: Arm Cortex-A72 r0p3 (v8-A), id 0x2
[ 1.0000000] cpu2: package 0, core 2, smt 0
[ 1.0000000] cpu3 at cpus0: Arm Cortex-A72 r0p3 (v8-A), id 0x3
[ 1.0000000] cpu3: package 0, core 3, smt 0
[ 1.0000000] gic0 at simplebus1: GIC
[ 1.0000000] armgic0 at gic0: Generic Interrupt Controller, 256 sources (247 valid)
[ 1.0000000] armgic0: 16 Priorities, 224 SPIs, 7 PPIs, 16 SGIs
[ 1.0000000] syscon0 at simplebus1: System Controller Registers
[ 1.0000000] fclock0 at simplebus2: 54000000 Hz fixed clock (osc)
[ 1.0000000] syscon1 at simplebus1: couldn't get registers
[ 1.0000000] bcmcprman0 at simplebus1: BCM283x Clock Controller
[ 1.0000000] bcmaux0 at simplebus1
[ 1.0000000] fclock1 at simplebus2: 480000000 Hz fixed clock (otg)
[ 1.0000000] fclock2 at simplebus0sysctl_createv: sysctl_create(108MHz-clock) returned 22
fclock2: failed to create sysctl node for 108MHz-clock (108MHz-clock): 22
[ 1.0000000] : 108000000 Hz fixed clock (108MHz-clock)
[ 1.0000000] fclock3 at simplebus0sysctl_createv: sysctl_create(27MHz-clock) returned 22
fclock3: failed to create sysctl node for 27MHz-clock (27MHz-clock): 22
[ 1.0000000] : 27000000 Hz fixed clock (27MHz-clock)
[ 1.0000000] bcmicu0 at simplebus1: Multiprocessor
[ 1.0000000] gtmr0 at simplebus0: Generic Timer
[ 1.0000000] gtmr0: interrupting on GIC irq 27
[ 1.0000000] armgtmr0 at gtmr0: Generic Timer (54000 kHz, virtual)
[ 1.0000040] bcmgpio0 at simplebus1: GPIO controller 2838
[ 1.0000040] bcmgpio0: pins 0..31 interrupting on GIC irq 145
[ 1.0000040] bcmgpio0: pins 32..58 interrupting on GIC irq 146
[ 1.0000040] gpio0 at bcmgpio0: 58 pins
[ 1.0000040] gregulator0 at simplebus0: vdd-sd-io
[ 1.0000040] gregulator0: cannot get pin 0
[ 1.0000040] fregulator0 at simplebus0: vcc-sd
[ 1.0000040] plcom0 at simplebus1: ARM PL011 UART
[ 1.0000040] plcom0: txfifo disabled
[ 1.0000040] plcom0: console
[ 1.0000040] plcom0: interrupting on GIC irq 153
[ 1.0000040] com0 at simplebus1: BCM AUX UART, 1-byte FIFO
[ 1.0000040] com0: interrupting on GIC irq 125
[ 1.0000040] fregulator1 at simplebus0: cam1-reg
[ 1.0000040] fregulator2 at simplebus0: cam-dummy-reg
[ 1.0000040] fregulator3 at simplebus0: 3v3
[ 1.0000040] fregulator4 at simplebus0: 5v0
[ 1.0000040] /soc/avs-monitor@7d5d2000/thermal at syscon0 not configured
[ 1.0000040] bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 DMA9 DMA10
[ 1.0000040] /soc/power at simplebus1 not configured
[ 1.0000040] /phy at simplebus0 not configured
[ 1.0000040] /soc/clock@7ef00000 at simplebus1 not configured
[ 1.0000040] /soc/interrupt-controller@7ef00100 at simplebus1 not configured
[ 1.0000040] /soc/i2c@7ef04500 at simplebus1 not configured
[ 1.0000040] /soc/i2c@7ef09500 at simplebus1 not configured
[ 1.0000040] bcmmbox0 at simplebus1: VC mailbox
[ 1.0000040] bcmmbox0: interrupting on GIC irq 65
[ 1.0000040] vcmbox0 at bcmmbox0
[ 1.0000040] /scb/pcie@7d500000 at simplebus3 not configured
[ 1.0000040] genet0 at simplebus3: GENETv5.0
[ 1.0000040] genet0: Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000040] brgphy0 at genet0 phy 0: BCM54213PE 1000BASE-T media interface, rev. 2
[ 1.0000040] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000040] genet0: interrupting on GIC irq 189
[ 1.0000040] /soc/mailbox@7e00b840 at simplebus1 not configured
[ 1.0000040] bcmpmwdog0 at simplebus1: Power management, Reset and Watchdog controller
[ 1.0000040] /soc/rng@7e104000 at simplebus1 not configured
[ 1.0000040] sdhc0 at simplebus1: SDHC controller
[ 1.0000040] sdhc0: interrupting on GIC irq 158
[ 1.0000040] gpioleds0 at simplebus0: led0
[ 1.0000040] sdhc1 at simplebus4: SDHC controller
[ 1.0000040] sdhc1: interrupting on GIC irq 158
[ 1.0000040] /scb/dma@7e007b00 at simplebus3 not configured
[ 1.0000040] /soc/timer@7e003000 at simplebus1 not configured
[ 1.0000040] /soc/txp@7e004000 at simplebus1 not configured
[ 1.0000040] /soc/hvs@7e400000 at simplebus1 not configured
[ 1.0000040] dwctwo0 at simplebus1: USB controller
[ 1.0000040] dwctwo0: interrupting on GIC irq 105
[ 1.0000040] /soc/pixelvalve@7e206000 at simplebus1 not configured
[ 1.0000040] /soc/pixelvalve@7e207000 at simplebus1 not configured
[ 1.0000040] /soc/pixelvalve@7e20a000 at simplebus1 not configured
[ 1.0000040] /soc/pixelvalve@7e216000 at simplebus1 not configured
[ 1.0000040] /soc/pixelvalve@7ec12000 at simplebus1 not configured
[ 1.0000040] /soc/hdmi@7ef00700 at simplebus1 not configured
[ 1.0000040] /soc/hdmi@7ef05700 at simplebus1 not configured
[ 1.0000040] /gpu at simplebus0 not configured
[ 1.0000040] /v3dbus/v3d@7ec04000 at simplebus5 not configured
[ 1.0000040] armpmu0 at simplebus0: Performance Monitor Unit
[ 1.0000040] /soc/gpiomem at simplebus1 not configured
[ 1.0000040] /scb/hevc-decoder@7eb00000 at simplebus3 not configured
[ 1.0000040] /scb/rpivid-local-intc@7eb10000 at simplebus3 not configured
[ 1.0000040] /scb/h264-decoder@7eb20000 at simplebus3 not configured
[ 1.0000040] /scb/vp9-decoder@7eb30000 at simplebus3 not configured
[ 1.4377316] sdhc0: SDHC 3.0, rev 153, platform DMA, 250000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
[ 1.4377316] sdmmc0 at sdhc0 slot 0
[ 1.4377316] sdhc1: SDHC 3.0, rev 16, PIO, 100000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
[ 1.4377316] sdmmc1 at sdhc1 slot 0
[ 1.4377316] usb0 at dwctwo0: USB revision 2.0
[ 1.4918823] uhub0 at usb0: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.6396294] sdmmc1: SD card status: 4-bit, C10, A1
[ 1.6396294] ld1 at sdmmc1: <0x03:0x5344:ABLCD:0x80:0x2c8d2a28:0x112>
[ 1.6547824] ld1: 30436 MB, 7729 cyl, 128 head, 63 sec, 512 bytes/sect x 62333952 sectors
[ 1.6628374] dk0 at ld1: "EFI", 163840 blocks at 3, type: msdos
[ 1.6628374] dk1 at ld1: "netbsd-root", 62169088 blocks at 163843, type: ffs
[ 1.6779929] ld1: 4-bit width, High-Speed/SDR25, 50.000 MHz
[ 1.7034674] sdmmc0: 4-bit width, 50.000 MHz
[ 1.7034674] sdmmc0: SDIO function
[ 1.7034674] bwfm0 at sdmmc0 function 1
[ 1.7134678] (manufacturer 0x2d0, product 0xa9a6) at sdmmc0 function 2 not configured
[ 1.7234679] (manufacturer 0x2d0, product 0xa9a6, standard function interface code 0x2) at sdmmc0 function 3 not configured
[ 2.1234751] uhub1 at uhub0 port 1: vendor 1a40 (0x1a40) USB 2.0 Hub (0x0101), class 9/0, rev 2.00/1.11, addr 2
[ 2.1334753] uhub1: single transaction translator
[ 2.4734816] uhub0: illegal enable change, port 1
[ 2.4734816] swwdog0: software watchdog initialized
[ 2.4849610] WARNING: 5 errors while detecting hardware; check system log.
[ 2.4949829] boot device: ld1
[ 2.4949829] root on ld1a dumps on ld1b
[ 2.4949829] vfs_mountroot: can't open root device
[ 2.5062696] cannot mount root, error = 16
[ 2.5062696] root device (default ld1a):
[ 2.9565842] dump device (default ld1b):
[ 3.5691601] file system (default generic):
[ 4.4570736] root on ld1a dumps on ld1b
[ 4.4570736] vfs_mountroot: can't open root device
[ 4.4570736] cannot mount root, error = 16
[ 4.4570736] root device (default ld1a): dk1
[ 6.2315575] dump device:
[ 6.7315099] file system (default generic):
[ 6.7815565] root on dk1
[ 6.7815565] root file system type: ffs
[ 6.7815565] kern.module.path=/stand/evbarm/9.99.100/modules
[ 6.7930354] WARNING: clock lost 208 days
[ 6.7930354] WARNING: using filesystem time
[ 6.8010280] WARNING: CHECK AND RESET THE DATE!
[ 6.8130355] bwfm0: Firmware file not available
[ 6.8130355] bwfm0: NVRAM file not available
[ 6.8230355] init path (default /sbin/init):
[ 7.0697992] init: trying /sbin/init
/etc/rc.conf is not configured. Multiuser boot aborted.
Enter pathname of shell or RETURN for /bin/sh:
We recommend that you create a non-root account and use su(1) for root access.
#