Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2022-10-27 21:50:49
From: yamori813
Description: SHEEVAPLUG
[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[     1.000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[     1.000000]     2018, 2019, 2020, 2021, 2022
[     1.000000]     The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 9.3 (SHEEVAPLUG) #2: Fri Oct 28 05:26:46 JST 2022
[     1.000000]         hiroki@netbsd:/usr/home/hiroki/NetBSD93/usr/src/sys/arch/evbarm/compile/obj/SHEEVAPLUG
[     1.000000] total memory = 512 MB
[     1.000000] avail memory = 494 MB
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] mainbus0 (root)
[     1.000000] cpu0 at mainbus0 core 0: Sheeva 88SV131 rev 1 (ARM9E-S V5TE core)
[     1.000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
[     1.000000] cpu0: 16KB/32B 4-way L1 VIVT Instruction cache
[     1.000000] cpu0: 16KB/32B 4-way write-back-locking-C L1 VIVT Data cache
[     1.000000] mvsoc0 at mainbus0: Marvell 88F6281 Rev. A1  Kirkwood
[     1.000000] mvsoc0: CPU Clock 1200.000 MHz  SysClock 400.000 MHz  TClock 200.000 MHz
[     1.000000] mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff irq 65: Marvell SoC Timer
[     1.000000] mvsocgpp0 at mvsoc0 unit 0 offset 0x10100-0x101ff irq 35: Marvell SoC General Purpose I/O Port Interface
[     1.000000] mvsocgpp0: 50 gpio pins
[     1.000000] mvsocgpp0: interrupts 96..103, intr 35
[     1.000000] mvsocgpp0: interrupts 104..111, intr 36
[     1.000000] mvsocgpp0: interrupts 112..119, intr 37
[     1.000000] mvsocgpp0: interrupts 120..127, intr 38
[     1.000000] mvsocgpp0: interrupts 128..135, intr 39
[     1.000000] mvsocgpp0: interrupts 136..143, intr 40
[     1.000000] mvsocgpp0: interrupts 144..151, intr 41
[     1.000000] mvsocgpp0:   Data Out:                  0x00000000
[     1.000000] mvsocgpp0:   Data Out Enable Control:   0xefffffff
[     1.000000] mvsocgpp0:   Data Blink Enable:         0x00000000
[     1.000000] mvsocgpp0:   Data In Polarity:          0x00000000
[     1.000000] mvsocgpp0:   Data In:                   0x00000080
[     1.000000] mvsocgpp0:   Interrupt Cause:           0x00000000
[     1.000000] mvsocgpp0:   Interrupt Mask:            0x00000000
[     1.000000] mvsocgpp0:   Interrupt Level Mask:      0x00000000
[     1.000000] mvsocgpp0:   High Data Out:             0x00000004
[     1.000000] mvsocgpp0:   High Data Out Enable Ctrl: 0xfffffffb
[     1.000000] mvsocgpp0:   High Blink Enable:         0x00000000
[     1.000000] mvsocgpp0:   High Data In Polarity:     0x00000000
[     1.000000] mvsocgpp0:   High Data In:              0x00000004
[     1.000000] mvsocgpp0:   High Interrupt Cause:      0x00000000
[     1.000000] mvsocgpp0:   High Interrupt Mask:       0x00000000
[     1.000000] mvsocgpp0:   High Interrupt Level Mask: 0x00000000
[     1.000000] gpio0 at mvsocgpp0: 50 pins
[     1.000000] mvsocrtc0 at mvsoc0 unit 0 offset 0x10300-0x10317: Marvell SoC Real Time Clock
[     1.000000] com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 33: ns16550a, working fifo
[     1.000000] com0: console
[     1.000000] com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 34: ns16550a, working fifo
[     1.000000] ehci0 at mvsoc0 unit 0 offset 0x50000-0x50fff irq 19: Marvell USB 2.0 Interface
[     1.000000] ehci0: EHCI version 1.0
[     1.000000] usb0 at ehci0: USB revision 2.0
[     1.000000] gtidmac0 at mvsoc0 unit 0 offset 0x60000-0x60fff: Marvell IDMA Controller/XOR Engine
[     1.000000] gtidmac0: XOR Engine 4 channels, intr 5, 6, 7, 8
[     1.000000] gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x110ff irq 29: Marvell TWSI controller
[     1.000000] iic0 at gttwsi0: I2C bus
[     1.000000] mvcesa0 at mvsoc0 unit 0 offset 0x3d000-0x3dfff irq 22: Marvell Cryptographic Engines and Security Accelerator
[     1.000000] mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit Ethernet Controller
[     1.000000] mvgbe0 at mvgbec0 port 0 irq 11
[     1.000000] mvgbe0: Ethernet address [_MAC_XXXXXXXXXX]
[     1.000000] makphy0 at mvgbe0 phy 8: Marvell 88E1116R Gigabit PHY, rev. 0
[     1.000000] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[     1.000000] mvgbec1 at mvsoc0 unit 1 offset 0x74000-0x77fff: Marvell Gigabit Ethernet Controller
[     1.000000] mvgbe at mvgbec1 port 0 not configured
[     1.000000] mvpex0 at mvsoc0 unit 0 offset 0x40000-0x41fff irq 9: Marvell PCI Express Interface
[     1.000000] pci0 at mvpex0
[     1.000000] pci0: i/o space, memory space enabled
[     1.000000] vendor 11ab product 6281 (miscellaneous memory, revision 0x03) at pci0 dev 0 function 0 not configured
[     1.000000] mvsata0 at mvsoc0 unit 0 offset 0x80000-0x87fff irq 21: Marvell Serial-ATA Host Controller (SATAHC)
[     1.000000] mvsata0: GenIIe, 1hc, 2port/hc
[     1.000000] atabus0 at mvsata0 channel 0
[     1.000000] atabus1 at mvsata0 channel 1
[     1.000000] mvsdio at mvsoc0 unit 0 not configured
[     1.000000] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[     1.000012] timecounter: Timecounter "mvsoctmr0" frequency 200000000 Hz quality 100
[     1.039972] uhub0 at usb0: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
[     1.039972] uhub0: 1 port with 1 removable, self powered
[     3.259969] uhub1 at uhub0 port 1: Genesys Logic (0x5e3) USB2.0 Hub (0x610), class 9/0, rev 2.00/77.32, addr 2
[     3.259969] uhub1: multiple transaction translators
[     3.259969] uhub1: 4 ports with 3 removable, self powered
[     4.589970] uhub2 at uhub1 port 1: Genesys Logic (0x5e3) USB2.0 Hub (0x610), class 9/0, rev 2.00/77.32, addr 3
[     4.589970] uhub2: multiple transaction translators
[     4.589970] uhub2: 4 ports with 4 removable, self powered
[     5.909971] umass0 at uhub2 port 4 configuration 1 interface 0
[     5.909971] umass0: BUFFALO (0x411) USB Flash Disk (0x111), rev 2.00/1.00, addr 4
[     5.909971] umass0: using SCSI over Bulk-Only
[     5.909971] scsibus0 at umass0: 2 targets, 1 lun per target
[     8.529969] sd0 at scsibus0 target 0 lun 0: <BUFFALO, USB Flash Disk, 3.10> disk removable
[     8.549976] sd0: 14806 MB, 3716 cyl, 255 head, 32 sec, 512 bytes/sect x 30322688 sectors
[     8.579977] boot device: <unknown>
[     8.579977] unknown device major 0xffffffffffffffff
[     8.579977] root device: 
[     8.579977] use one of: mvgbe0 sd0[a-p] ddb halt reboot
[     8.579977] root device: sd0
[     8.579977] dump device (default sd0b): 
[     8.579977] file system (default generic): 
[     8.579977] root on sd0a dumps on sd0b
[     9.089979] mountroot: trying ffs...
[     9.099980] mountroot: trying ext2fs...
[     9.109980] mountroot: trying nfs...
[     9.109980] mountroot: trying msdos...
[     9.109980] mountroot: trying cd9660...
[     9.129980] root file system type: cd9660
[     9.129980] kern.module.path=/stand/evbarm/9.3/modules
[     9.149980] init path (default /sbin/init): 
[     9.149980] init: copying out path `/sbin/init' 11