Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-10-29 20:12:07
From: tsutsui
Description: NetBSD/hp700 5.99.45 on HP 9000/735/125
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.45 (GENERIC) #37: Mon Feb 14 22:15:11 JST 2011
tsutsui@mirage:/usr/src/sys/arch/hp700/compile/GENERIC
HP9000/735/130 (Snake Cheetah)
real mem = 65536 KB (73728 reserved for PROM, 54636 KB used by NetBSD)
avail mem = 53104 KB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root) [flex fff80000]
pdc0 at mainbus0
power0 at mainbus0: not available
cpu0 at mainbus0 hpa 0xfffbe000 path 8 irq 31 ipl 0: PA7100 (T-Bird) rev 0
cpu0: PCXT, PA-RISC 1.1b, lev 1, cat A, 125 MHz clk
cpu0: shadows, 256K/256K D/I caches, 120 shared TLB, 16 shared BTLB
cpu0: PCXT (Rolex - CMOS-26B) floating point, rev 1
mem0 at mainbus0 hpa 0xfffbf000 path 9: size 64MB
sti0 at mainbus0 hpa 0xf8000000 path 1: rev 8.02;10, ID 0x26D1482A40A00499
sti0: HPA1659A, 2048x1024 frame buffer, 1280x1024x8 display
sti0: 10x20 font type 1, 40 bpc, charset 0-255
asp0 at mainbus0 hpa 0xf0000000 path 2 irq 28: Hardball rev 20, lan 1 scsi 7
gsc0 at asp0: wordleds
oosiop0 at gsc0 hpa 0xf0825000 path 2/0/1 irq 9 ipl 1: NCR53C700 rev 0, 31MHz, SCSI ID 7
scsibus0 at oosiop0: 8 targets, 8 luns per target
iee0 at gsc0 hpa 0xf0826000 path 2/0/2 irq 8 ipl 2: Intel 82596DX/SX address [_MAC_XXXXXXXXXX]
hil0 at gsc0 hpa 0xf0821000 path 2/0/3 irq 1 ipl 3
com2 at gsc0 hpa 0xf0823000 path 2/0/4 irq 5 ipl 4: ns16550a, working fifo
com3 at gsc0 hpa 0xf0822000 path 2/0/5 irq 6 ipl 5: ns16550a, working fifo
lpt1 at gsc0 hpa 0xf0824000 path 2/0/6 irq 7 ipl 6
siop0 at gsc0 hpa 0xf0830000 path 2/0/7 irq 3 ipl 7: NCR53C720 rev 2
scsibus1 at siop0: 16 targets, 8 luns per target
harmony0 at gsc0 hpa 0xf1000000 path 2/0/8 irq 13 ipl 8: rev 0
audio0 at harmony0: full duplex, playback, capture
mongoose0 at mainbus0 hpa 0xfc000000 path 4 irq 17: HWPC000 rev 34, 33 MHz
eisa0 at mongoose0
isa at mongoose0 not configured
vmmask 000001fe schedmask 000001ff highmask 000001ff
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "itimer" frequency 125000000 Hz quality 100
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
wsdisplay0 at sti0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
hilkbd0 at hil0 code 1: 109-key keyboard, layout 2
wskbd0 at hilkbd0: console keyboard, using wsdisplay0
hilms0 at hil0 code 2: Mouse, 2 axes, 3 buttons
wsmouse0 at hilms0 mux 0
sd0 at scsibus0 target 0 lun 0: <TEAC, FC-1 HF 07, RV B> disk removable
sd0(oosiop0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Logical Unit Not Ready, Cause Not Reportable
sd0: drive offline
sd0: async, 8-bit transfers
sd1 at scsibus0 target 6 lun 0: <QUANTUM, LPS1080S, 111B> disk fixed
sd1: 1001 MB, 2874 cyl, 8 head, 89 sec, 512 bytes/sect x 2051460 sectors
sd1: sync (192.00ns offset 8), 8-bit (5.208MB/s) transfers
Kernelized RAIDframe activated
sd0(oosiop0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00
SENSE KEY: Not Ready
ASC/ASCQ: Logical Unit Not Ready, Cause Not Reportable
oosiop0: phase mismatch addr=0116c0e0
sd0(oosiop0:0:0:0): Check Condition on CDB: 0x23 00 00 00 00 00 00 00 0c 00
SENSE KEY: Illegal Request
ASC/ASCQ: Invalid Command Operation Code
boot device: sd1
root on sd1a dumps on sd1b
root file system type: ffs