Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2022-12-08 02:12:46
From: nrgmilk
Description: Cisco ESA AsyncOS 14.2.0 build 016 (FreeBSD 10.4-RELEASE) boot on KVM
  ______               ____   _____ _____  
 |  ____|             |  _ \ / ____|  __ \ 
 | |___ _ __ ___  ___ | |_) | (___ | |  | |
 |  ___| '__/ _ \/ _ \|  _ < \___ \| |  | |
 | |   | | |  __/  __/| |_) |____) | |__| |
 | |   | | |    |    ||     |      |      |
 |_|   |_|  \___|\___||____/|_____/|_____/    ```                        `
                                             s` `.....---.......--.```   -/
 +============Welcome to FreeBSD===========+ +o   .--`         /y:`      +.
 |                                         |  yo`:.            :o      `+-
 |  1. Boot Multi User [Enter]             |   y/               -/`   -o/
 |  2. Boot [S]ingle User                  |  .-                  ::/sy+:.
 |  3. [Esc]ape to loader prompt           |  /                     `--  /
 |  4. Reboot                              | `:                          :`
 |                                         | `:                          :`
 |  Options:                               |  /                          /
 |  5. [K]ernel: kernel (1 of 2)           |  .-                        -.
 |  6. Configure Boot [O]ptions...         |   --                      -.
 |                                         |    `:`                  `:`
 |                                         |      .--             `--.
 |                                         |         .---.....----. 
 +=========================================+
                                          
Booting....rc.local.gz/boot/menu.rc.local
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.4-RELEASE #0: Thu May 12 09:24:21 PDT 2022
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/build/iproot/freebsd/mods/src/sys/amd64/compile/MESSAGING_GATEWAY.amd64 amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT(vga): text 80x25
CPU: Intel Xeon Processor (Icelake) (3408.07-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x80660  Family=0x6  Model=0x86  Stepping=0
  Features=0xf83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xfffa3223<SSE3,PCLMULQDQ,VMX,SSSE3,FMA,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0xf03f472a<TSCADJ,BMI1,AVX2,BMI2,ERMS,INVPCID,MPX,AVX512F,RDSEED,ADX,SMAP,AVX512CD,SHA>
  Structured Extended Features2=0x405f4e<UMIP,PKU,RDPID>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
Hypervisor: Origin = "KVMKVMKVM"
real memory  = 17179869184 (16384 MB)
avail memory = 16655720448 (15884 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <BOCHS  BXPC    >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 4 package(s) x 1 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
random: <Software, Yarrow> initialized
Security policy loaded: TrustedBSD MAC/seeotheruids (mac_seeotheruids)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ichgpio module loaded
kbd1 at kbdmux0
smbios0: <System Management BIOS> at iomem 0xf5ad0-0xf5aee on motherboard
smbios0: Version: 2.8, BCD Revision: 2.8
cryptosoft0: <software crypto> on motherboard
acpi0: <BOCHS BXPC> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc0e0-0xc0ef at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pci0: <bridge> at device 1.3 (no driver attached)
virtio_pci0: <VirtIO PCI Network adapter> port 0xc040-0xc05f mem 0xfebc0000-0xfebc0fff,0xfebf4000-0xfebf7fff irq 10 at device 2.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci0
vtnet0: Ethernet address: [_MAC_XXXXXXXXXX]
uhci0: <Intel 82801I (ICH9) USB controller> port 0xc060-0xc07f irq 11 at device 3.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xc080-0xc09f irq 11 at device 3.1 on pci0
usbus1 on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0xc0a0-0xc0bf irq 10 at device 3.2 on pci0
usbus2 on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfebc1000-0xfebc1fff irq 10 at device 3.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
virtio_pci1: <VirtIO PCI Block adapter> port 0xc000-0xc03f mem 0xfebc2000-0xfebc2fff,0xfebf8000-0xfebfbfff irq 11 at device 4.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci1
vtblk0: 512000MB (1048576000 512 byte sectors)
virtio_pci2: <VirtIO PCI Balloon adapter> port 0xc0c0-0xc0df mem 0xfebfc000-0xfebfffff irq 10 at device 5.0 on pci0
vtballoon0: <VirtIO Balloon Adapter> on virtio_pci2
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> port 0xaf00-0xaf0b on acpi0
acpi_syscontainer2: <System Container> port 0xafe0-0xafe3 on acpi0
acpi_syscontainer3: <System Container> port 0xae00-0xae17 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
dell_bios0: Unable to allocate memory resource.
amifl0: <AMI Flash Update utility driver> on isa0
dell_bios0: Unable to allocate memory resource.
orm0: <ISA Option ROM> at iomem 0xea000-0xeffff on isa0
Timecounters tick every 10.000 msec
biosVersion="1.15.0-2.module_el8.6.0+2880+7d9e3703"
biosReleaseDate="04/01/2014"
memory_DIMM_0="0x3fffc000"
SerialNumberInterface="vtnet0"
ManagementInterface="vtnet0"
IronPortSerial="20BDD3A9C085A54AAD6B-5239E41F2FEC"
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
random: unblocking device.
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Trying to mount root from ufs:/dev/mfid0p3 []...
mountroot: waiting for device /dev/mfid0p3 ...
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub0: 6 ports with 6 removable, self powered
Mounting from ufs:/dev/mfid0p3 failed with error 19.
Trying to mount root from ufs:/dev/raid/r0p3 []...
mountroot: waiting for device /dev/raid/r0p3 ...
Mounting from ufs:/dev/raid/r0p3 failed with error 19.
Trying to mount root from ufs:/dev/vtbd0p3 []...
AVAILABLE_DISKS vtbd0
FIRST_DISK vtbd0
FSTAB_DEVICE da0
not found
ln -s vtbd0 da0
ln -s vtbd0p1 da0p1
ln -s vtbd0p2 da0p2
ln -s vtbd0p3 da0p3
ln -s vtbd0p4 da0p4
ln -s vtbd0p5 da0p5
ln -s vtbd0p6 da0p6
ln -s vtbd0p7 da0p7
ln -s vtbd0p8 da0p8
ln -s vtbd0p9 da0p9
/etc/rc.conf: /data/bin/smbios: not found
[: ==: unexpected operator
[: ==: unexpected operator
ln: /compat/linux/usr: Read-only file system
ln: /compat/linux/lib: Read-only file system
ln: /usr/local/bin/python2.7-linux: Read-only file system
ln: /usr/local/bin/lib/python2.7-linux: No such file or directory
rm: /usr/local/lib/glib-2.0/include/glibconfig.h: Read-only file system
rm: /usr/local/lib/glib-2.0/include: Read-only file system
rm: /usr/local/lib/glib-2.0: Read-only file system
rm: /usr/local/lib/libgio-2.0.so: Read-only file system
rm: /usr/local/lib/libgio-2.0.so.0: Read-only file system
rm: /usr/local/lib/libgio-2.0.so.0.6000.7: Read-only file system
rm: /usr/local/lib/libglib-2.0.so: Read-only file system
rm: /usr/local/lib/libglib-2.0.so.0: Read-only file system
rm: /usr/local/lib/libglib-2.0.so.0.6000.7: Read-only file system
rm: /usr/local/lib/libgmodule-2.0.so: Read-only file system
rm: /usr/local/lib/libgmodule-2.0.so.0: Read-only file system
rm: /usr/local/lib/libgmodule-2.0.so.0.6000.7: Read-only file system
rm: /usr/local/lib/libgobject-2.0.so: Read-only file system
rm: /usr/local/lib/libgobject-2.0.so.0: Read-only file system
rm: /usr/local/lib/libgobject-2.0.so.0.6000.7: Read-only file system
rm: /usr/local/lib/libgthread-2.0.so: Read-only file system
rm: /usr/local/lib/libgthread-2.0.so.0: Read-only file system
rm: /usr/local/lib/libgthread-2.0.so.0.6000.7: Read-only file system
rm: /usr/local/lib/gio/modules/libgiognomeproxy.so: Read-only file system
rm: /usr/local/lib/gio/modules/libgiognutls.so: Read-only file system
rm: /usr/local/lib/gio/modules/libgiolibproxy.so: Read-only file system
rm: /usr/local/lib/gio/modules: Read-only file system
rm: /usr/local/lib/gio: Read-only file system
rm: /usr/local/lib/pkcs11/p11-kit-client.so: Read-only file system
rm: /usr/local/lib/pkcs11/p11-kit-trust.so: Read-only file system
rm: /usr/local/lib/pkcs11: Read-only file system
rm: /usr/local/lib/libunbound.a: Read-only file system
rm: /usr/local/lib/libunbound.so: Read-only file system
rm: /usr/local/lib/libunbound.so.2: Read-only file system
rm: /usr/local/lib/libunbound.so.2.5.5: Read-only file system
rm: /usr/local/lib/libunistring.a: Read-only file system
rm: /usr/local/lib/libunistring.so: Read-only file system
rm: /usr/local/lib/libunistring.so.2: Read-only file system
rm: /usr/local/lib/libunistring.so.2.0.0: Read-only file system
rm: /usr/local/lib/libidn2.a: Read-only file system
rm: /usr/local/lib/libidn2.so: Read-only file system
rm: /usr/local/lib/libidn2.so.0: Read-only file system
rm: /usr/local/lib/libidn2.so.0.3.7: Read-only file system
rm: /usr/local/lib/libhogweed.a: Read-only file system
rm: /usr/local/lib/libhogweed.so: Read-only file system
rm: /usr/local/lib/libhogweed.so.4: Read-only file system
rm: /usr/local/lib/libhogweed.so.4.5: Read-only file system
rm: /usr/local/lib/libnettle.a: Read-only file system
rm: /usr/local/lib/libnettle.so: Read-only file system
rm: /usr/local/lib/libnettle.so.6: Read-only file system
rm: /usr/local/lib/libnettle.so.6.5: Read-only file system
rm: /usr/local/lib/enchant/libenchant_myspell.so: Read-only file system
rm: /usr/local/lib/enchant/libenchant_myspell.a: Read-only file system
rm: /usr/local/lib/enchant: Read-only file system
rm: /usr/local/lib/libgmp.a: Read-only file system
rm: /usr/local/lib/libgmp.so: Read-only file system
rm: /usr/local/lib/libgmp.so.10: Read-only file system
rm: /usr/local/lib/libgmp.so.10.3.2: Read-only file system
rm: /usr/local/lib/libgmpxx.a: Read-only file system
rm: /usr/local/lib/libgmpxx.so: Read-only file system
rm: /usr/local/lib/libgmpxx.so.4: Read-only file system
rm: /usr/local/lib/libgmpxx.so.4.5.2: Read-only file system
rm: /usr/local/lib/libp11-kit.so: Read-only file system
rm: /usr/local/lib/libp11-kit.so.0: Read-only file system
rm: /usr/local/lib/libp11-kit.so.0.3.0: Read-only file system
rm: /usr/local/lib/p11-kit-proxy.so: Read-only file system
rm: /usr/local/lib/libgnutls.so: Read-only file system
rm: /usr/local/lib/libgnutls.so.30: Read-only file system
rm: /usr/local/lib/libgnutls.so.30.28.1: Read-only file system
rm: /usr/local/lib/libgnutlsxx.so: Read-only file system
rm: /usr/local/lib/libgnutlsxx.so.28: Read-only file system
rm: /usr/local/lib/libgnutlsxx.so.28.1.0: Read-only file system
rm: /usr/local/lib/girepository-1.0/GDesktopEnums-3.0.typelib: Read-only file system
rm: /usr/local/lib/girepository-1.0: Read-only file system
rm: /usr/local/lib/libproxy.so.1: Read-only file system
rm: /usr/local/lib/libenchant.so: Read-only file system
rm: /usr/local/lib/libenchant.so.1: Read-only file system
rm: /usr/local/lib/libenchant.so.1.6.0: Read-only file system
rm: /usr/local/lib/libhunspell-1.6.so: Read-only file system
rm: /usr/local/lib/libhunspell-1.6.so.0: Read-only file system
rm: /usr/local/lib/libhunspell-1.6.so.0.0.1: Read-only file system
rm: /usr/local/lib/libsqlite3.so: Read-only file system
rm: /usr/local/lib/libsqlite3.so.0: Read-only file system
rm: /usr/local/lib/libsqlite3.so.0.8.6: Read-only file system
rm: /usr/local/lib: Read-only file system
ln: /usr/local/lib/lib: Read-only file system
AsyncOS starting services ...
Setting hostuuid: a9d3bd20-85c0-4aa5-ad6b-5239e41f2fec.
Setting hostid: 0x4d3a7d6e.
/dev/da0p9: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0p9: clean, 6412633 free (0 frags, 6412633 blocks, 0.0% fragmentation)
vtbd0 recovering is not needed
vtbd0p9 resized
growfs: requested size 401GB is not larger than the current filesystem size 401GB
Entropy harvesting: interrupts ethernet point_to_point swi.
warning: total configured swap (2097152 pages) exceeds maximum recommended amount (1864304 pages).
warning: increase kern.maxswzone or reduce amount of swap.
Starting file system checks:
/dev/vtbd0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/vtbd0p3: clean, 469402 free (306 frags, 58637 blocks, 0.1% fragmentation)
/dev/da0p5: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0p5: clean, 503678 free (14 frags, 62958 blocks, 0.0% fragmentation)
/dev/da0p2: Invalid signature in fsinfo block
/dev/da0p2: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/da0p6: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0p6: clean, 48546 free (26 frags, 6065 blocks, 0.1% fragmentation)
/dev/da0p8: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0p8: clean, 3045058 free (26 frags, 380629 blocks, 0.0% fragmentation)
/dev/da0p9: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0p9: clean, 6412633 free (0 frags, 6412633 blocks, 0.0% fragmentation)
** /dev/vtbd0p3

USE JOURNAL? yes

** SU+J Recovering /dev/vtbd0p3
** Reading 33554432 byte journal from inode 4.

RECOVER? yes

** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.

WRITE CHANGES? yes

** 21 journal records in 2560 bytes for 26.25% utilization
** Freed 0 inodes (0 dirs) 0 blocks, and 0 frags.

***** FILE SYSTEM MARKED CLEAN *****
** /dev/da0p5

USE JOURNAL? yes

** SU+J Recovering /dev/da0p5
** Reading 33554432 byte journal from inode 4.

RECOVER? yes

** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.

***** FILE SYSTEM MARKED CLEAN *****
** /dev/da0p2
Invalid signature in fsinfo block
Fix? yes

File system preen failed, trying fsck -y 
** /dev/vtbd0p3

USE JOURNAL? yes

** SU+J Recovering /dev/vtbd0p3
Journal timestamp does not match fs mount time
** Skipping journal, falling through to full fsck

** Last Mounted on /mnt
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
6582 files, 38389 used, 469402 free (306 frags, 58637 blocks, 0.1% fragmentation)

***** FILE SYSTEM IS CLEAN *****

***** FILE SYSTEM WAS MODIFIED *****
** /dev/da0p5

USE JOURNAL? yes

** SU+J Recovering /dev/da0p5
Journal timestamp does not match fs mount time
** Skipping journal, falling through to full fsck

** Last Mounted on /mnt/nextroot
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
3 files, 4113 used, 503678 free (14 frags, 62958 blocks, 0.0% fragmentation)

***** FILE SYSTEM IS CLEAN *****

***** FILE SYSTEM WAS MODIFIED *****
** /dev/da0p2
** Phase 1 - Read and Compare FATs
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
** Phase 4 - Checking for Lost Files
4 files, 1046452 free (261613 clusters)
** /dev/da0p6

USE JOURNAL? yes

** SU+J Recovering /dev/da0p6
** Reading 4194304 byte journal from inode 4.

RECOVER? yes

** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.

WRITE CHANGES? yes

** 246 journal records in 8704 bytes for 90.44% utilization
** Freed 0 inodes (0 dirs) 0 blocks, and 0 frags.

***** FILE SYSTEM MARKED CLEAN *****
** /dev/da0p8
** Last Mounted on /mnt/var/db/godspeed
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
5 files, 5 used, 3045058 free (26 frags, 380629 blocks, 0.0% fragmentation)

***** FILE SYSTEM IS CLEAN *****
** /dev/da0p9

USE JOURNAL? yes

** SU+J Recovering /dev/da0p9
** Reading 33554432 byte journal from inode 4.

RECOVER? yes

** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.

***** FILE SYSTEM MARKED CLEAN *****
Mounting local file systems:.
[: ==: unexpected operator
[: ==: unexpected operator
ln: /usr/local/bin/lib/python2.7-linux: No such file or directory
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /data/lib /usr/lib/compat/6 /usr/local/lib/compat /usr/local/lib/perl5/5.24/mach/CORE /usr/local/opt/lib
32-bit compatibility ldconfig path: /usr/local/lib32 /usr/lib/compat /usr/lib/compat/6 /usr/local/lib /usr/local/lib32/compat
OS version 4 compatibility ldconfig path: /usr/lib/compat/4
ldconfig: warning: /usr/lib/compat/4: No such file or directory
OS version 6 compatibility ldconfig path: /usr/lib/compat/6
OS version 8 compatibility ldconfig path: /usr/lib/compat/8
[: ==: unexpected operator
[: ==: unexpected operator
ln: /usr/local/bin/python2.7-linux: File exists
ln: /usr/local/bin/lib/python2.7-linux: No such file or directory
Writing entropy file:.
/etc/rc: WARNING: $hostname is not set -- see rc.conf(5).
eval: /usr/sbin/ip6addrctl: not found
virtual platform
Converting vtnet0 to nic0
vtnet0: changing name to 'nic0'
nic0
Starting Network: lo0 nic0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 
	inet[_IP_XXXX] netmask 0xff000000 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
nic0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=6c07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	ether [_MAC_XXXXXXXXXX]
	hwaddr [_MAC_XXXXXXXXXX]
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
	media: Ethernet 10Gbase-T <full-duplex>
	status: active
[: ==: unexpected operator
[: ==: unexpected operator
ln: /compat/linux/usr/usr: File exists
ln: /compat/linux/lib/lib: File exists
ln: /usr/local/bin/python2.7-linux: File exists
ln: /usr/local/bin/lib/python2.7-linux: No such file or directory
/etc/rc: WARNING: run_rc_command: cannot run /sbin/devd
add net fe80::: gateway ::1 fib 0,1
add net ff02::: gateway ::1 fib 0,1
add net ::ffff:0.0.0.0: gateway ::1 fib 0,1
add net ::0.0.0.0: gateway ::1 fib 0,1
Generating host.conf.
eval: cannot open /etc/nsswitch.conf: No such file or directory
[: ==: unexpected operator
[: ==: unexpected operator
ln: /compat/linux/usr/usr: File exists
ln: /compat/linux/lib/lib: File exists
ln: /usr/local/bin/python2.7-linux: File exists
ln: /usr/local/bin/lib/python2.7-linux: No such file or directory
Creating and/or trimming log files.
Starting syslogd.
Jul  1 05:06:24  syslogd: /var/log/auth.log: No such file or directory
Jul  1 05:06:24  syslogd: kernel boot file is /boot/kernel/kernel
Jul  1 05:06:24  kernel: vtnet0: changing name to 'nic0'
No core dumps found.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /data/lib /usr/lib/compat/6 /usr/local/lib/compat /usr/local/lib/perl5/5.24/mach/CORE /usr/local/opt/lib
32-bit compatibility ldconfig path: /usr/local/lib32 /usr/lib/compat /usr/lib/compat/6 /usr/local/lib /usr/local/lib32/compat
OS version 4 compatibility ldconfig path: /usr/lib/compat/4
ldconfig: warning: /usr/lib/compat/4: No such file or directory
OS version 6 compatibility ldconfig path: /usr/lib/compat/6
OS version 8 compatibility ldconfig path: /usr/lib/compat/8
Starting auditd.
Clearing /tmp (X related).
eval: utx: not found
Mounting late file systems:.
nextboot: illegal option -- D
usage: nextboot [-b] device bootstring [bootstring] ...
       nextboot {-e,-d} device
Starting cron.
Local package initialization:.
[: ==: unexpected operator
[: ==: unexpected operator
ln: /compat/linux/usr/usr: File exists
ln: /compat/linux/lib/lib: File exists
ln: /usr/local/bin/python2.7-linux: File exists
ln: /usr/local/bin/lib/python2.7-linux: No such file or directory
sysctl: unknown oid 'debug.acpi.disabled' at line 47
RDRAND Instruction Supported
Seeded kernel with 2048 bits
Checking RAID change during reboot
No RAID status logged
Cached RAID type
+ . /etc/rc.subr
+ : 17
+ export RC_PID
+ [ -z : ]
+ _rc_subr_loaded=:
+ name=config
+ start_cmd=config_start
+ rm -f /etc/rc.d/fsck_upgrade
+ run_rc_command faststart
+ _return=0
+ rc_arg=faststart
+ [ -z config ]
+ shift 1
+ rc_extra_args=''
+ _rc_prefix=''
+ rc_arg=start
+ rc_fast=yes
+ rc_quiet=yes
+ eval '_override_command=$config_program'
+ _override_command=''
+ command=''
+ _keywords='start stop restart rcvar enabled '
+ rc_pid=''
+ _pidcmd=''
+ _procname=''
+ [ -n '' ]
+ [ -z start ]
+ [ start = enabled ]
+ [ -n '' ]
+ eval 'rc_flags=$config_flags'
+ rc_flags=''
+ eval '_chdir=$config_chdir' '_chroot=$config_chroot' '_nice=$config_nice' '_user=$config_user' '_group=$config_group' '_groups=$config_groups' '_fib=$config_fib' '_env=$config_env' '_prepend=$config_prepend'
+ _chdir='' _chroot='' _nice='' _user='' _group='' _groups='' _fib='' _env='' _prepend=''
+ [ -n '' ]
+ [ -z yes ]
+ [ start != start ]
+ [ -n '' -a start != rcvar -a start != stop ]
+ [ -n '' -a start = stop -a -z '' ]
+ [ start = start -a -z yes -a -n '' ]
+ eval '_cmd=$start_cmd' '_precmd=$start_precmd' '_postcmd=$start_postcmd'
+ _cmd=config_start _precmd='' _postcmd=''
+ [ -n config_start ]
+ _run_rc_precmd
+ check_required_before start
+ local _f
+ return 0
+ [ -n '' ]
+ check_required_after start
+ local _f _args
+ return 0
+ return 0
+ _run_rc_doit 'config_start '
+ debug 'run_rc_command: doit: config_start '
+ eval 'config_start '
+ config_start
+ [ -f /etc/asyncos.conf ]
+ [ -f /etc/phoebe.conf ]
+ . /etc/phoebe.conf
+ IPDATA=/data
+ TRANSLATION_QUEUE=/data/etc/translations
+ KRB5_CONFIG=/data/kerberos/krb5.conf
+ KRB5_KTNAME=/data/kerberos/krb5.keytab
+ STDOUT_LOG=/data/log/stdout
+ TMPDIR=/data/tmp
+ RUN_DIR=/data/run
+ PYTHON_EGG_CACHE=/data/lib/python-eggs/
+ PYTHON_EGG_CACHE_ROOT=/data/lib/python-eggs
+ PRODUCT_NAME='Cisco A50 Secure Email Gateway'
+ MOTD_PRODUCT_NAME='Cisco A50'
+ MODEL_NAME=A50
+ HEIMDALL_DIR=/data/etc/heimdall/
+ HEIMDALL_SOCK=/tmp/heimdall.sock
+ DIAG_USER=service
+ DIAG_INTERFACE=fxp2
+ QUEUE_INIT_BREADCRUMB=/var/db/godspeed/.queue_built
+ BASE_HOME=/data/home
+ COMPRESS_CONFIG=1
+ PLATFORM=dell2650
+ SERIAL_NUMBER_INTERFACE=bge0
+ MALLOC_OPTIONS=X
+ MALLOC_CONF=xmalloc:true
+ export IPDATA
+ export STDOUT_LOG TMPDIR RUN_DIR
+ export TRANSLATION_QUEUE
+ export KRB5_CONFIG
+ export KRB5_KTNAME
+ export PYCBOX_DB
+ export PYTHON_EGG_CACHE
+ export PRODUCT_NAME MODEL_NAME SERIAL_NUMBER SERVICE_TAG
+ export MOTD_PRODUCT_NAME
+ export RELEASE_TAG BUILD_DATE
+ export HEIMDALL_DIR HEIMDALL_SOCK
+ export DIAG_USER DIAG_INTERFACE
+ export QUEUE_INIT_BREADCRUMB
+ export MANAGEMENT_INTERFACE SERIAL_NUMBER_INTERFACE
+ export BASE_HOME COMPRESS_CONFIG
+ export PLATFORM
+ export MALLOC_OPTIONS MALLOC_CONF
+ BUILD_DATE=2022-05-12
+ RELEASE_TAG=phoebe-14-2-0-616
+ MANAGEMENT_INTERFACE=nic0
+ SERIAL_NUMBER_INTERFACE=nic0
+ DIAG_INTERFACE=nic0
+ PLATFORM=vmware
+ MODEL_NAME=C300V
+ PRODUCT_NAME='Cisco C300V Secure Email Gateway Virtual'
+ MOTD_PRODUCT_NAME='Cisco C300V'
+ [ '' = '' ]
+ CONFIG_ROOT=/data/db/config
+ [ '' = '' ]
+ RELOAD_ROOT=/data/etc/reload
+ [ '' = '' ]
+ FEATURES_DIR=/data/db/features
+ [ '' = '' ]
+ PUB_LOG_DIR=/data/pub
+ [ '' = '' ]
+ INTERNAL_LOG_DIR=/data/log
+ [ '' = '' ]
+ EUQ_MSGS_DIR=/data/db/euq/msgs
+ [ '' = '' ]
+ INSTALL_BITS_DIR=/data/install_bits
+ [ '' = '' ]
+ POSTGRES_DATA_DIR=/data/db/postgres
+ [ '' = '' ]
+ REPORTING_DATA_DIR=/data/db/reporting
+ [ '' = '' ]
+ SPLUNK_DATA_DIR=/data/db/splunk
+ [ '' = '' ]
+ DATA_TMP_DIR=/data/tmp
+ [ '' = '' ]
+ ETC_RC_CONF_LOCAL=/etc/rc.conf.local
+ [ '' = '' ]
+ SANDBOX_BOOTSTRAP=/data/etc/sandbox
+ [ x = x ]
+ export DIAG_SSHKEY_SOURCE=/root/.ssh/authorized_keys-enablediag
+ [ x = x ]
+ export DIAG_SSHKEY_DEST=/root/.ssh/authorized_keys
+ APP='setup_config --translation-manifest=/data/etc/TRANSLATION_MANIFEST'
+ [ '' = '' ]
+ [ -f /data/etc/translations ]
+ cat /data/etc/translations
+ SETUP_CONFIG_TRANSLATIONS='MAKE_EMPTY DHCP dynamicip appliance SANDBOX VMWARE REMOVE_QABACKDOOR REMOVE_DEBUG MAKE_FACTORY
 KEYS'
+ RM=rm
 setup_config: MAKE_EMPTY DHCPJul  1 05:06:26  kernel: nic0: link state changed to UP
Jul  1 05:07:26  dhclient[976]: no such user: _dhcp, falling back to "nobody"
Jul  1 05:08:27  dhclient[981]: connection closed
Jul  1 05:08:27  dhclient[981]: exiting.
 dynamicip appliance SANDBOX VMWARE REMOVE_QABACKDOOR REMOVE_DEBUG MAKE_FACTORY KEYS+ _return=0
+ [ 0 -ne 0 ]
+ return 0
+ _run_rc_postcmd
+ [ -n '' ]
+ return 0
+ return 0
 keygenVM_init start
Generating public/private rsa key pair.
Your identification has been saved in /tmp/ssh/ssh_host_rsa_key.
Your public key has been saved in /tmp/ssh/ssh_host_rsa_key.pub.
The key fingerprint is:
SHA256:lx8mZnSQ/mVezpBA4ymqfGxe+PkghuMMelku8to90Fo root@
The key's randomart image is:
+---[RSA 2048]----+
|          .oo    |
|          .o.o   |
|         .o +. . |
|         o.+  = .|
|     .  S *.o+ = |
|    ..E+ = +... o|
|    .B= B o .    |
|  .o==o* + o     |
|  o=o.+.. o..    |
+----[SHA256]-----+
Generating public/private dsa key pair.
Your identification has been saved in /tmp/ssh/ssh_host_dsa_key.
Your public key has been saved in /tmp/ssh/ssh_host_dsa_key.pub.
The key fingerprint is:
SHA256:esxnl2iBYfKy+TYuBvbNHbZBVpajCFye2V3qqgWyi1s root@
The key's randomart image is:
+---[DSA 1024]----+
|     . ..    ..  |
|      o. + .=o   |
|      ..*..+o.   |
|       +.o+.     |
|      o So. .    |
|    o  X .++ .   |
|   . oEo+oB+o    |
|     o++=*o.     |
|    oo.++.       |
+----[SHA256]-----+
 make_queue... doneverify log
dtd
Starting heimdall.
1:	Fri Jul  1 05:08:43 2022 Service started on unix socket /tmp/heimdall.bd

Product Name:  Cisco C300V Secure Email Gateway Virtual
Model Name:    C300V
Build Date:    2022-05-12
Release Tag:   phoebe-14-2-0-616
Serial Number: 20BDD3A9C085A54AAD6B-**********
sysctl: unknown oid 'dev.cpu.0.freq'
 .

Fri Jul  1 05:08:49 GMT 2022
Jul  1 05:08:49  getty[1608]: open /dev/cuau1: No such file or directory

AsyncOS ironport.example.com (cuau0)

login: