Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-12-14 01:54:41
From: yamori813
Description: Nec_WG300HP
---<<BOOT>>--- ar934x_chip_init_gmac: gmac_cfg=0x00000041 ar934x_configure_gmac: ETH_CFG=0x00000001 KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.4-STABLE zrouter_yamori813-n234782-cc4215eab94a Nec_WG300HP mips gcc version 4.2.1 20070831 patched [FreeBSD] Preloaded elf kernel "kernel" at 0x803ff440. CPU: MIPS Technologies (Atheros AR9342 rev 3) processor v76.151 MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes) L1 i-cache: 4 ways of 512 sets, 32 bytes per line L1 d-cache: 4 ways of 256 sets, 32 bytes per line L2 cache: disabled Config1=0xbee3519e<PerfCount,WatchRegs,MIPS16,EJTAG> Config2=0x80001000 Config3=0x2c20<ULRI,DSP2P,DSPP,VInt> Config7=0x80000800<WII> real memory = 67108864 (65536K bytes) Physical memory chunk(s): 0x00492000 - 0x03ef3fff, 61218816 bytes (14946 pages) avail memory = 60379136 (57MB) random: no preloaded entropy cache arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. hostuuid: using 00000000-0000-0000-0000-000000000000 random: entropy device external interface WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0. mem: <memory> null: <full device, null device, zero device> nexus0: <MIPS32 root nexus> argemdio0: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x19000000-0x19000fff on nexus0 mdio0: <MDIO> on argemdio0 mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0 arswitch0: <Atheros QCA8337 Ethernet Switch (ver 1 rev 2)> on mdio0 arswitch0: ar8327_fetch_pdata_pad: pad 0: mode=6, rxclk_sel=0, txclk_sel=0, txclk_delay_sel=1, rxclk_delay_sel=2, txclk_delay_en=1, rxclk_enable_en=1, sgmii_delay_en=0, pipe_rxclk_sel=0 arswitch0: ar8327_phy_fixup: called; phy=0; chiprev=2 arswitch0: ar8327_phy_fixup: called; phy=1; chiprev=2 arswitch0: ar8327_phy_fixup: called; phy=2; chiprev=2 arswitch0: ar8327_phy_fixup: called; phy=3; chiprev=2 arswitch0: ar8327_phy_fixup: called; phy=4; chiprev=2 arswitch0: ar8327_atu_learn_default: TODO! miibus0: <MII bus> on arswitch0 ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 ukphy0: OUI 0x00c82e, model 0x0003, rev. 6 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto miibus1: <MII bus> on arswitch0 ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 ukphy1: OUI 0x00c82e, model 0x0003, rev. 6 ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto miibus2: <MII bus> on arswitch0 ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2 ukphy2: OUI 0x00c82e, model 0x0003, rev. 6 ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto miibus3: <MII bus> on arswitch0 ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3 ukphy3: OUI 0x00c82e, model 0x0003, rev. 6 ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto miibus4: <MII bus> on arswitch0 ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4 ukphy4: OUI 0x00c82e, model 0x0003, rev. 6 ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto etherswitch0: <Switch controller> on arswitch0 mdio1: <MDIO> on arswitch0 mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1 clock0: <Generic MIPS32 ticker> on nexus0 Timecounter "MIPS32" frequency 280000000 Hz quality 800 Event timer "MIPS32" frequency 280000000 Hz quality 800 apb0 at irq 4 on nexus0 uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0 uart0: console (115200,n,8,1) uart0: fast interrupt uart0: PPS capture mode: DCD gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0 gpio0: [GIANT-LOCKED] gpio0: function_set: 0x0 gpio0: function_clear: 0x0 gpio0: gpio pinmask=0x7ff81f gpiobus0: <GPIO bus> on gpio0 gpioled1: <GPIO led> at pin 13 on gpiobus0 gpioc0: <GPIO controller> on gpio0 arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0 arge0: Overriding MAC address from environment: '[_MAC_XXXXXXXXXX]' arge0: arge_fetch_pll_config: pll_1000 = 0x6000000 arge0: arge_attach: overriding MII mode to 'RGMII' miiproxy0: <MII/MDIO proxy, MII side> on arge0 arge0: can't attach proxy arge0: finishing attachment, phymask 0000, proxy null arge0: bpf attached arge0: Ethernet address: [_MAC_XXXXXXXXXX] spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0 spibus0: <SPI bus> on spi0 mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 mx25l0: device type mx25ll32, size 4096K in 64 sectors of 64K, erase size 64K ehci0: <AR71XX Integrated USB 2.0 controller> at mem 0x1b000100-0x1bffffff irq 1 on nexus0 usbus0: EHCI version 1.0 usbus0 on ehci0 ehci0: usbpf: Attached ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0 Device configuration finished. Timecounters tick every 1.000 msec lo0: bpf attached vlan: initialized, using hash tables with chaining tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024 arswitch0port1: link state changed to DOWN arswitch0port2: link state changed to DOWN arswitch0port3: link state changed to DOWN arswitch0port4: link state changed to DOWN arswitch0port5: link state changed to DOWN GEOM: new disk flash/spi0 MAP: flash/spi0: 0x20000, data=0x20000 "/dev/map/bootloader" MAP: flash/spi0: 20000x3c0000, data=0x3c0000 "/dev/map/upgrade" MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000 usbus0: 480Mbps High Speed USB v2.0 Trying to mount root from cd9660:/dev/map/rootfs.uzip []... ugen0.1: <Atheros EHCI root HUB> at usbus0 uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 MAP: flash/spi0: 20000x120000, data=0x120000 "/dev/map/kernel" MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000 MAP: flash/spi0: 140000x2a0000, data=0x2a0000 "/dev/map/rootfs" MAP: flash/spi0: 3f0000x10000, data=0x10000 "/dev/map/ART" MAP: No valid partition found at map/rootfs.uzip cd9660: RockRidge Extension Warning: no time-of-day clock registered, system time will not be set accurately start_init: trying /sbin/init uhub0: 1 port with 1 removable, self powered ugen0.2: <vendor 0x0409 product 0x005a> at usbus0 uhub1: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2> on usbus0 arswitch0: arswitch_miipollstat: port 1: port -> UP arswitch0port2: link state changed to UP uhub1: 4 ports with 4 removable, self powered MAP: No valid partition found at md0 random: unblocking device. MAP: No valid partition found at md0 lo0: link state changed to UP /tmp: optimization changed from SPACE to TIME