Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-12-15 02:28:37
From: JE3KMZ
Description: FreeBSD/i386 on NEC Express5800/GT110d [N8100-1767Y]
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.1-RELEASE-p3 GENERIC i386 FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) VT(vga): resolution 640x480 CPU: Intel(R) Pentium(R) CPU G620 @ 2.60GHz (2594.21-MHz 686-class CPU) Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xd9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE> AMD Features=0x28100000<NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 2147483648 (2048 MB) avail memory = 2064629760 (1968 MB) CPU microcode: updated from 0x23 to 0x2f Event timer "LAPIC" quality 600 ACPI APIC Table: <AMI 057F > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 Launching APs: 1 random: entropy device external interface kbd1 at kbdmux0 WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf0480-0xf049e smbios0: Version: 2.7, BCD Revision: 2.7 aesni0: No AES or SHA support. acpi0: <AMI 057F> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 Event timer "HPET5" frequency 14318180 Hz quality 440 Event timer "HPET6" frequency 14318180 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 19 at device 6.0 on pci0 pci2: <ACPI PCI bus> on pcib2 3ware device driver for 9000 series storage controllers, version:[_IP_XXXXXX] twa0: <3ware 9000 series Storage Controller> port 0xe000-0xe0ff mem 0xf6000000-0xf7ffffff,0xfb920000-0xfb920fff irq 19 at device 0.0 on pci2 twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-2LP, 2 ports, Firmware FE9X[_IP_XXXXXX], BIOS BE9X[_IP_XXXXXX] twa0: Deprecated code (to be removed in FreeBSD 14): twa(4) removed pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms> at device 22.1 (no driver attached) ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfba03000-0xfba033ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pci4: <ACPI PCI bus> on pcib4 pci0:4:0:0: no valid vpd ident found pci0:4:0:0: failed to read VPD data. bge0: <Broadcom BCM5717 B0, ASIC rev. 0x5717100> mem 0xf8050000-0xf805ffff,0xf8040000-0xf804ffff,0xf8030000-0xf803ffff irq 16 at device 0.0 on pci4 bge0: APE FW version: NCSI v1.0.4.0 bge0: CHIP ID 0x05717100; ASIC REV 0x5717; CHIP REV 0x57171; PCI-E bge0: APE event 0x00020510 send timed out miibus0: <MII bus> on bge0 brgphy0: <BCM5717C 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Using defaults for TSO: 65518/35/2048 bge0: Ethernet address: [_MAC_XXXXXXXXXX] pci0:4:0:1: no valid vpd ident found pci0:4:0:1: failed to read VPD data. bge1: <Broadcom BCM5717 B0, ASIC rev. 0x5717100> mem 0xf8020000-0xf802ffff,0xf8010000-0xf801ffff,0xf8000000-0xf800ffff irq 17 at device 0.1 on pci4 bge1: APE FW version: NCSI v1.0.4.0 bge1: CHIP ID 0x05717100; ASIC REV 0x5717; CHIP REV 0x57171; PCI-E bge1: APE event 0x00020510 send timed out miibus1: <MII bus> on bge1 brgphy1: <BCM5717C 1000BASE-T media interface> PHY 2 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Using defaults for TSO: 65518/35/2048 bge1: Ethernet address: [_MAC_XXXXXXXXXX] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 pci5: <ACPI PCI bus> on pcib5 vgapci0: <VGA-compatible display> mem 0xfa000000-0xfaffffff,0xfb810000-0xfb813fff,0xfb000000-0xfb7fffff irq 18 at device 0.0 on pci5 vgapci0: Boot video device ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfba02000-0xfba023ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 usbus1: 480Mbps High Speed USB v2.0 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci6: <ACPI PCI bus> on pcib6 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xfba01000-0xfba017ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 ichsmb0: <Intel Cougar Point SMBus controller> port 0xf000-0xf01f mem 0xfba00000-0xfba000ff irq 18 at device 31.3 on pci0 acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ipmi0: <IPMI System Interface> port 0xca2-0xca3 on acpi0 ipmi0: KCS mode found at io 0xca2 on acpi orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff pnpid ORM0000 on isa0 ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0 ata1: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. ppc0: parallel port not found. coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC-low" frequency 1297055851 Hz quality 1000 Timecounters tick every 1.000 msec smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 ipmi0: IPMI device rev. 1, firmware rev. 0.52, version 2.0, device support mask 0xbf ipmi0: Number of channels 1 ipmi0: Attached watchdog ipmi0: Establishing power cycle handler ses0 at ahciem0 bus 0 scbus7 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device da0 at twa0 bus 0 scbus0 target 0 lun 0 da0: <AMCC 9650SE-2LP DISK 4.10> Fixed Direct Access SPC-3 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] da0: 100.000MB/s transfers da0: 152577MB (312477696 512 byte sectors) cd0 at ahcich5 bus 0 scbus6 target 0 lun 0 cd0: <TEAC DV-28S-Y N.4B> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXX] 1086390 cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed ses0: pass1,cd0 in 'Slot 05', SATA Slot: scbus6 target 0 ugen0.1: <Intel EHCI root HUB> at usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 uhub0 on usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 Trying to mount root from ufs:/dev/da0p2 [rw]... uhub1 on usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 uhub2 on uhub0 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 uhub3 on uhub1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 CPU: Intel(R) Pentium(R) CPU G620 @ 2.60GHz (2594.11-MHz 686-class CPU) Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xd9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE> AMD Features=0x28100000<NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics uhub2: 6 ports with 6 removable, self powered uhub3: 6 ports with 6 removable, self powered lo0: link state changed to UP bge0: APE event 0x00020510 send timed out bge0: APE event 0x00010510 send timed out bge0: link state changed to DOWN ugen0.3: <vendor 0x0557 product 0x8021> at usbus0 uhub4 on uhub2 uhub4: <vendor 0x0557 product 0x8021, class 9/0, rev 1.10/1.00, addr 3> on usbus0 uhub4: 4 ports with 4 removable, self powered ugen1.3: <American Megatrends Inc. Composite Device> at usbus1 umass0 on uhub3 umass0: <Interface> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:10:0: Attached to scbus10 cd1 at umass-sim0 bus 0 scbus10 target 0 lun 0 cd1: <AMI Remote CD/DVD 1.00> Removable CD-ROM SCSI device cd1: [_SERIAL_NUMBER_XXXXXXXXXX] cd1: 40.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present cd1: quirks=0x10<10_BYTE_ONLY> da1 at umass-sim0 bus 0 scbus10 target 0 lun 1 da1: <AMI Remote FD 1.00> Removable Direct Access SCSI device da1: [_SERIAL_NUMBER_XXXXXXXXXX] da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present da1: quirks=0x2<NO_6_BYTE> ugen0.4: <vendor 0x099a USB Keyboard> at usbus0 ukbd0 on uhub4 ukbd0: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/0.90, addr 4> on usbus0 kbd2 at ukbd0 da2 at umass-sim0 bus 0 scbus10 target 0 lun 2 da2: <AMI Remote USB MEM 1.00> Removable Direct Access SCSI device da2: [_SERIAL_NUMBER_XXXXXXXXXX] da2: 40.000MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present da2: quirks=0x2<NO_6_BYTE> da3 at umass-sim0 bus 0 scbus10 target 0 lun 3 da3: <AMI Virtual Flash 1.00> Removable Direct Access SCSI device da3: [_SERIAL_NUMBER_XXXXXXXXXX] da3: 40.000MB/s transfers da3: Attempt to query device size failed: NOT READY, Medium not present da3: quirks=0x2<NO_6_BYTE> bge0: link state changed to UP uhid0 on uhub4 uhid0: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/0.90, addr 4> on usbus0 ums0 on uhub4 ums0: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/0.90, addr 4> on usbus0 ums0: 5 buttons and [XYZ] coordinates ID=0 ums1 on uhub4 ums1: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/0.90, addr 4> on usbus0 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled