Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2022-12-15 02:31:43
From: JE3KMZ
Description: FreeBSD/amd64 on NEC Express5800/110Ge [N8100-1447Y]
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.1-RELEASE-p3 GENERIC amd64
FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU            3065  @ 2.33GHz (2327.63-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x6fb  Family=0x6  Model=0xf  Stepping=11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  VT-x: HLT,PAUSE
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 3977011200 (3792 MB)
CPU microcode: updated from 0xb3 to 0xba
Event timer "LAPIC" quality 100
ACPI APIC Table: <PTLTD  	 APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xf6a10-0xf6a2e
smbios0: Version: 2.5
aesni0: No AES or SHA support.
acpi0: <PTLTD 	 XSDT>
acpi0: Power Button (fixed)
acpi0: _OSC failed: AE_BUFFER_OVERFLOW
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20201113/dsfield-352)
ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639)
ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) 82566DM-2 ICH9 AMT> port 0x1820-0x183f mem 0xdc300000-0xdc31ffff,0xdc320000-0xdc320fff irq 16 at device 25.0 on pci0
em0: EEPROM V1.4-0
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 20 at device 26.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 21 at device 26.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 22 at device 26.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdc321800-0xdc321bff irq 22 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20201113/dsfield-352)
ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639)
ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20201113/dsfield-352)
ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639)
ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci3: <ACPI PCI bus> on pcib3
atapci0: <JMicron JMB368 UDMA133 controller> port 0x2020-0x2027,0x2014-0x2017,0x2018-0x201f,0x2010-0x2013,0x2000-0x200f irq 16 at device 0.0 on pci3
ata2: <ATA channel> at channel 0 on atapci0
pcib4: <PCI-PCI bridge> irq 17 at device 28.5 on pci0
Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20201113/dsfield-352)
ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639)
ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pcib4: failed to allocate initial I/O port window: 0-0xfff
pci4: <PCI bus> on pcib4
uhci3: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 19 at device 29.0 on pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 20 at device 29.1 on pci0
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
uhci5: <Intel 82801I (ICH9) USB controller> port 0x18e0-0x18ff irq 21 at device 29.2 on pci0
usbus6 on uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdc321c00-0xdc321fff irq 19 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
em1: <Intel(R) Legacy PRO/1000 GT 82541PI> port 0x3080-0x30bf mem 0xdc060000-0xdc07ffff,0xdc040000-0xdc05ffff irq 19 at device 2.0 on pci5
em1: EEPROM V1.0-0
em1: Using 1024 TX descriptors and 1024 RX descriptors
em1: Ethernet address: [_MAC_XXXXXXXXXX]
em1: netmap queues/slots: TX 1/1024, RX 1/1024
vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xd8000000-0xdbffffff,0xdc000000-0xdc03ffff at device 3.0 on pci5
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9 AHCI SATA controller> port 0x1c70-0x1c77,0x1c64-0x1c67,0x1c68-0x1c6f,0x1c60-0x1c63,0x1c00-0x1c1f mem 0xdc321000-0xdc3217ff irq 17 at device 31.2 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
acpi_syscontainer0: <System Container> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 1 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcb7ff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC-low" frequency 1163749902 Hz quality 1000
Timecounters tick every 1.000 msec
ugen6.1: <Intel UHCI root HUB> at usbus6
ugen7.1: <Intel EHCI root HUB> at usbus7
uhub0 on usbus6
uhub1 on usbus7
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen4.1: <Intel UHCI root HUB> at usbus4
ugen5.1: <Intel UHCI root HUB> at usbus5
uhub2 on usbus4
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub3 on usbus5
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub4 on usbus2
uhub5 on usbus3
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen0.1: <Intel UHCI root HUB> at usbus0
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub6 on usbus0
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub7 on usbus1
uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
Trying to mount root from ufs:/dev/ada0p2 [rw]...
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <TOSHIBA Q300. SAFM12.3> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
ada1 at ahcich1 bus 0 scbus2 target 0 lun 0
ada1: <Hitachi HTS543216L9A300 FB2OC40C> ATA8-ACS SATA 2.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 152627MB (312581808 512 byte sectors)
cd0 at ata2 bus 0 scbus0 target 0 lun 0
cd0: <PIONEER DVD-RW  DVR-107D 1.22> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXX]
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub6: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3 usbus7
Root mount waiting for: usbus3 usbus7
uhub5: 6 ports with 6 removable, self powered
uhub1: 6 ports with 6 removable, self powered
CPU: Intel(R) Xeon(R) CPU            3065  @ 2.33GHz (2327.50-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x6fb  Family=0x6  Model=0xf  Stepping=11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  VT-x: HLT,PAUSE
  TSC: P-state invariant, performance statistics
ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x1c20-0x1c3f mem 0xdc322000-0xdc3220ff irq 17 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
lo0: link state changed to UP
tun0: link state changed to UP
em0: link state changed to UP
WARNING: attempt to domain_add(netgraph) after domainfinalize()
em1: link state changed to UP
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled