Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-12-15 05:03:41
From: JE3KMZ
Description: FreeBSD/amd64 on NEC Express5800/110Ge [N8100-1447Y]
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.1-RELEASE-p3 GENERIC amd64 FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU 3065 @ 2.33GHz (2327.63-MHz K8-class CPU) Origin="GenuineIntel" Id=0x6fb Family=0x6 Model=0xf Stepping=11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> VT-x: HLT,PAUSE TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 3977011200 (3792 MB) CPU microcode: updated from 0xb3 to 0xba Event timer "LAPIC" quality 100 ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 Launching APs: 1 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf6a10-0xf6a2e smbios0: Version: 2.5 aesni0: No AES or SHA support. acpi0: <PTLTD XSDT> acpi0: Power Button (fixed) acpi0: _OSC failed: AE_BUFFER_OVERFLOW cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20201113/dsfield-352) ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639) ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689) pcib0: _OSC failed: AE_ALREADY_EXISTS pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 em0: <Intel(R) 82566DM-2 ICH9 AMT> port 0x1820-0x183f mem 0xdc300000-0xdc31ffff,0xdc320000-0xdc320fff irq 16 at device 25.0 on pci0 em0: EEPROM V1.4-0 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 uhci0: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 20 at device 26.0 on pci0 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 21 at device 26.1 on pci0 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 uhci2: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 22 at device 26.2 on pci0 usbus2 on uhci2 usbus2: 12Mbps Full Speed USB v1.0 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdc321800-0xdc321bff irq 22 at device 26.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 usbus3: 480Mbps High Speed USB v2.0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20201113/dsfield-352) ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639) ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689) pcib0: _OSC failed: AE_ALREADY_EXISTS pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20201113/dsfield-352) ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639) ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689) pcib0: _OSC failed: AE_ALREADY_EXISTS pci3: <ACPI PCI bus> on pcib3 atapci0: <JMicron JMB368 UDMA133 controller> port 0x2020-0x2027,0x2014-0x2017,0x2018-0x201f,0x2010-0x2013,0x2000-0x200f irq 16 at device 0.0 on pci3 ata2: <ATA channel> at channel 0 on atapci0 pcib4: <PCI-PCI bridge> irq 17 at device 28.5 on pci0 Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20201113/dsfield-352) ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639) ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689) pcib0: _OSC failed: AE_ALREADY_EXISTS pcib4: failed to allocate initial I/O port window: 0-0xfff pci4: <PCI bus> on pcib4 uhci3: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 19 at device 29.0 on pci0 usbus4 on uhci3 usbus4: 12Mbps Full Speed USB v1.0 uhci4: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 20 at device 29.1 on pci0 usbus5 on uhci4 usbus5: 12Mbps Full Speed USB v1.0 uhci5: <Intel 82801I (ICH9) USB controller> port 0x18e0-0x18ff irq 21 at device 29.2 on pci0 usbus6 on uhci5 usbus6: 12Mbps Full Speed USB v1.0 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdc321c00-0xdc321fff irq 19 at device 29.7 on pci0 usbus7: EHCI version 1.0 usbus7 on ehci1 usbus7: 480Mbps High Speed USB v2.0 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 em1: <Intel(R) Legacy PRO/1000 GT 82541PI> port 0x3080-0x30bf mem 0xdc060000-0xdc07ffff,0xdc040000-0xdc05ffff irq 19 at device 2.0 on pci5 em1: EEPROM V1.0-0 em1: Using 1024 TX descriptors and 1024 RX descriptors em1: Ethernet address: [_MAC_XXXXXXXXXX] em1: netmap queues/slots: TX 1/1024, RX 1/1024 vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xd8000000-0xdbffffff,0xdc000000-0xdc03ffff at device 3.0 on pci5 vgapci0: Boot video device isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel ICH9 AHCI SATA controller> port 0x1c70-0x1c77,0x1c64-0x1c67,0x1c68-0x1c6f,0x1c60-0x1c63,0x1c00-0x1c1f mem 0xdc321000-0xdc3217ff irq 17 at device 31.2 on pci0 ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] acpi_syscontainer0: <System Container> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 1 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcb7ff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC-low" frequency 1163749902 Hz quality 1000 Timecounters tick every 1.000 msec ugen6.1: <Intel UHCI root HUB> at usbus6 ugen7.1: <Intel EHCI root HUB> at usbus7 uhub0 on usbus6 uhub1 on usbus7 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen4.1: <Intel UHCI root HUB> at usbus4 ugen5.1: <Intel UHCI root HUB> at usbus5 uhub2 on usbus4 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 uhub3 on usbus5 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen2.1: <Intel UHCI root HUB> at usbus2 ugen3.1: <Intel EHCI root HUB> at usbus3 uhub4 on usbus2 uhub5 on usbus3 uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen0.1: <Intel UHCI root HUB> at usbus0 ugen1.1: <Intel UHCI root HUB> at usbus1 uhub6 on usbus0 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub7 on usbus1 uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 Trying to mount root from ufs:/dev/ada0p2 [rw]... ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: <TOSHIBA Q300. SAFM12.3> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors) ada1 at ahcich1 bus 0 scbus2 target 0 lun 0 ada1: <Hitachi HTS543216L9A300 FB2OC40C> ATA8-ACS SATA 2.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 152627MB (312581808 512 byte sectors) cd0 at ata2 bus 0 scbus0 target 0 lun 0 cd0: <PIONEER DVD-RW DVR-107D 1.22> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXXX] cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present uhub6: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub7: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered Root mount waiting for: usbus3 usbus7 Root mount waiting for: usbus3 usbus7 uhub5: 6 ports with 6 removable, self powered uhub1: 6 ports with 6 removable, self powered CPU: Intel(R) Xeon(R) CPU 3065 @ 2.33GHz (2327.50-MHz K8-class CPU) Origin="GenuineIntel" Id=0x6fb Family=0x6 Model=0xf Stepping=11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> VT-x: HLT,PAUSE TSC: P-state invariant, performance statistics ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x1c20-0x1c3f mem 0xdc322000-0xdc3220ff irq 17 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 lo0: link state changed to UP tun0: link state changed to UP em0: link state changed to UP WARNING: attempt to domain_add(netgraph) after domainfinalize() em1: link state changed to UP ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled