Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-12-15 05:05:44
From: JE3KMZ
Description: FreeBSD/i386 on HP ProLiant ML110 G7
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.1-RELEASE-p3 GENERIC i386 FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) VT(vga): resolution 640x480 CPU microcode: updated from 0x28 to 0x2f CPU: Intel(R) Celeron(R) CPU G530 @ 2.40GHz (2394.72-MHz 686-class CPU) Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xd9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE> AMD Features=0x28100000<NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 2147483648 (2048 MB) avail memory = 2039681024 (1945 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <HP ProLiant> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: unblocking device. Security policy loaded: MAC/ntpd (mac_ntpd) Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20201113/tbfadt-850) Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20201113/tbfadt-850) ioapic0: MADT APIC ID 8 != hw id 0 ioapic0 <Version 2.0> irqs 0-23 Launching APs: 1 random: entropy device external interface kbd1 at kbdmux0 WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf4f40-0xf4f5e smbios0: Version: 2.6, BCD Revision: 2.6 aesni0: No AES or SHA support. acpi0: <HP ProLiant> acpi0: Power Button (fixed) acpi0: _OSC failed: AE_BUFFER_OVERFLOW cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 Event timer "HPET5" frequency 14318180 Hz quality 440 Event timer "HPET6" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 apei0: <ACPI Platform Error Interface> on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci2: <ACPI PCI bus> on pcib2 ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfacc0000-0xfacc03ff irq 21 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0 pci4: <ACPI PCI bus> on pcib4 em0: <Intel(R) Gigabit CT 82574L> port 0x4000-0x401f mem 0xfbde0000-0xfbdfffff,0xfbdd0000-0xfbdd3fff irq 16 at device 0.0 on pci4 em0: EEPROM V2.1-2 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using 2 RX queues 2 TX queues em0: Using MSI-X interrupts with 3 vectors em0: Ethernet address: [_MAC_XXXXXXXXXX] pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0 pci5: <ACPI PCI bus> on pcib5 em1: <Intel(R) Gigabit CT 82574L> port 0x5000-0x501f mem 0xfbee0000-0xfbefffff,0xfbed0000-0xfbed3fff irq 17 at device 0.0 on pci5 em1: EEPROM V2.1-0 em1: Using 1024 TX descriptors and 1024 RX descriptors em1: Using 2 RX queues 2 TX queues em1: Using MSI-X interrupts with 3 vectors em1: Ethernet address: [_MAC_XXXXXXXXXX] pcib6: <ACPI PCI-PCI bridge> at device 28.6 on pci0 pci6: <ACPI PCI bus> on pcib6 3ware device driver for 9000 series storage controllers, version:[_IP_XXXXXX] twa0: <3ware 9000 series Storage Controller> port 0x6000-0x60ff mem 0xf8000000-0xf9ffffff,0xfbff0000-0xfbff0fff irq 18 at device 0.0 on pci6 twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-2LP, 2 ports, Firmware FE9X[_IP_XXXXXX], BIOS BE9X[_IP_XXXXXX] twa0: Deprecated code (to be removed in FreeBSD 14): twa(4) removed pcib7: <ACPI PCI-PCI bridge> at device 28.7 on pci0 pci7: <ACPI PCI bus> on pcib7 vgapci0: <VGA-compatible display> mem 0xf7000000-0xf7ffffff,0xfbce0000-0xfbce3fff,0xfb000000-0xfb7fffff irq 16 at device 0.1 on pci7 vgapci0: Boot video device uhci0: <HP iLO Standard Virtual USB controller> port 0x2000-0x201f irq 16 at device 0.4 on pci7 usbus1 on uhci0 usbus1: 12Mbps Full Speed USB v1.0 ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfacb0000-0xfacb03ff irq 20 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 usbus2: 480Mbps High Speed USB v2.0 pcib8: <PCI-PCI bridge> at device 30.0 on pci0 pci8: <PCI bus> on pcib8 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel Cougar Point SATA600 controller> port 0x1400-0x1407,0x1408-0x140b,0x1410-0x1417,0x1418-0x141b,0x1420-0x142f,0x1430-0x143f irq 17 at device 31.2 on pci0 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 atapci1: <Intel Cougar Point SATA300 controller> port 0x1440-0x1447,0x1448-0x144b,0x1450-0x1457,0x1458-0x145b,0x1460-0x146f,0x1470-0x147f irq 17 at device 31.5 on pci0 ata4: <ATA channel> at channel 0 on atapci1 ata5: <ATA channel> at channel 1 on atapci1 acpi_tz0: <Thermal Zone> on acpi0 ipmi0: <IPMI System Interface> port 0xca2-0xca3 on acpi0 ipmi0: KCS mode found at io 0xca2 on acpi acpi_syscontainer0: <System Container> port 0x2e-0x2f on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. psm0: model Generic PS/2 mouse, device ID 0 uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcafff pnpid ORM0000 on isa0 ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0 ata1: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. ppc0: parallel port not found. uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on isa0 uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 214e00001800 device_attach: est0 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 214e00001800 device_attach: est1 attach returned 6 Timecounter "TSC-low" frequency 1197279816 Hz quality 1000 Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled ipmi0: IPMI device rev. 1, firmware rev. 1.55, version 2.0, device support mask 0x8f ipmi0: Number of channels 1 ipmi0: Attached watchdog ipmi0: Establishing power cycle handler ugen1.1: <HP UHCI root HUB> at usbus1 ugen2.1: <Intel EHCI root HUB> at usbus2 uhub0 on usbus1 uhub0: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub1 on usbus2 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen0.1: <Intel EHCI root HUB> at usbus0 uhub2 on usbus0 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 Trying to mount root from ufs:/dev/da0p3 [rw]... uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered Root mount waiting for: usbus0 CAM usbus2 ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 uhub3 on uhub2 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 uhub4 on uhub1 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 Root mount waiting for: usbus0 CAM usbus2 uhub4: 6 ports with 6 removable, self powered uhub3: 6 ports with 6 removable, self powered Root mount waiting for: CAM da0 at twa0 bus 0 scbus0 target 0 lun 0 da0: <AMCC 9650SE-2LP DISK 4.10> Fixed Direct Access SPC-3 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] da0: 100.000MB/s transfers da0: 476827MB (976541696 512 byte sectors) CPU: Intel(R) Celeron(R) CPU G530 @ 2.40GHz (2394.56-MHz 686-class CPU) Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xd9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE> AMD Features=0x28100000<NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics lo0: link state changed to UP em0: link state changed to UP tun0: link state changed to UP