Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-12-26 05:51:16
From: yamori813
Description: m83xxx with umass sd0
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020, 2021, 2022 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.99.2 (M83XXX) #10: Mon Dec 26 14:44:22 JST 2022 [ 1.000000] hiroki@netbsd:/usr/home/hiroki/netbsd-src/sys/arch/evbarm/compile/obj/M83XXX [ 1.000000] total memory = 128 MB [ 1.000000] avail memory = 120 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] mainbus0 (root) [ 1.000000] cpu0 at mainbus0 core 0: ARM1136J-S r1p5 (ARM11J V6J core) [ 1.000000] cpu0: DC enabled IC enabled WB enabled LABT [ 1.000000] cpu0: L1 64KB/32B 4-way (512 set) VIPT Instruction cache [ 1.000000] cpu0: L1 64KB/32B 4-way (512 set) write-back-locking-C VIPT Data cache [ 1.000000] cfi0 at mainbus0 [ 1.000000] cfi0: CFI NOR flash 32 MB x8/x16 [ 1.000000] nor0 at cfi0 [ 1.000000] nor0: page size: 64, spare size: 0, block size: 128 KB [ 1.000000] nor0: LUN size: 256 blocks, LUNs: 1, total storage size: 32 MB [ 1.000000] flash0 at nor0, size 256 KB, offset 0, read only [ 1.000000] flash0: erase size 128 KB bytes, write size 64 bytes [ 1.000000] ahb0 at mainbus0: AMBA Advanced High Performance Bus [ 1.000000] apb0 at ahb0 addr 0x10000000: AHB to APB Bus Bridge [ 1.000000] intc0 at apb0 addr 0x100a0000: interrupts 0..63 [ 1.000000] m83pmc0 at apb0 addr 0x100b0000: PMC [ 1.000000] m83gpio0 at apb0 addr 0x10070000 intr 33 [ 1.000000] com0 at apb0 addr 0x10090000-0x10093fff intr 41: Tegra UART, 8-byte FIFO [ 1.000000] com0: console [ 1.000000] timer0 at apb0 addr 0x10050000 intr 31: sys clock [ 1.000000] timer1 at apb0 addr 0x10050000 intr 30: stat clock [ 1.000000] ehci0 at ahb0 addr 0xf000000-0xf7fffff intr 5: USB Interface [ 1.000000] ehci0: EHCI version 1.0 [ 1.000000] usb0 at ehci0: USB revision 2.0 [ 1.000003] timecounter: Timecounter "m83tmr" frequency 165000000 Hz quality 100 [ 1.000004] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.005155] gpio0 at m83gpio0: 32 pins [ 1.005155] WARNING: system needs entropy for security; see entropy(7) [ 1.042396] uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.042396] uhub0: 1 port with 1 removable, self powered [ 2.308429] uhub1 at uhub0 port 1: vendor 0409 (0x0409) product 0059 (0x0059), class 9/0, rev 2.00/1.00, addr 2 [ 2.308429] uhub1: single transaction translator [ 2.320849] uhub1: 4 ports with 4 removable, self powered [ 3.351049] kue0 at uhub1 port 2 [ 3.351049] kue0: LINKSYS (0x0565) USB Network Adapter (0x0005), rev 1.00/2.02, addr 3 [ 3.363465] kue0: warm boot, no firmware download [ 3.363465] kue0: Ethernet address [_MAC_XXXXXXXXXX] [ 4.033714] umass0 at uhub1 port 4 configuration 1 interface 0 [ 4.046135] umass0: vendor 0000 (0x0000) product 0000 (0x0000), rev 2.00/0.00, addr 4 [ 4.046135] umass0: using SCSI over Bulk-Only [ 5.237689] scsibus0 at umass0: 2 targets, 1 lun per target [ 5.250110] sd0 at scsibus0 target 0 lun 0: <Maxtor 6, Y160L0, YAR4> disk fixed [ 5.262524] sd0: fabricating a geometry [ 5.262524] sd0: 152 GB, 156334 cyl, 64 head, 32 sec, 512 bytes/sect x 320173056 sectors [ 5.274933] boot device: <unknown> [ 5.274933] root device: sd0a [ 9.010974] dump device (default sd0b): [ 9.681230] file system (default generic): [ 10.177715] root on sd0a dumps on sd0b [ 10.177715] sd0: fabricating a geometry [ 10.301842] root file system type: ffs [ 10.301842] kern.module.path=/stand/evbarm/10.99.2/modules [ 10.314253] WARNING: no TOD clock present [ 10.314253] WARNING: using filesystem time [ 10.326151] WARNING: CHECK AND RESET THE DATE! [ 10.363900] init path (default /sbin/init): [ 11.468577] init: trying /sbin/init [ 14.484734] entropy: ready