Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2022-12-27 15:50:27
From: skrll
Description: Odroid-C1 NetBSD 10 beta
[ 1.0000000] NetBSD/evbarm (fdt) booting ... [ 1.0000000] [ Kernel symbol table missing! ] [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019, 2020, 2021, 2022 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.0_BETA (GENERIC) #0: Mon Dec 26 11:25:01 UTC 2022 [ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/GENERIC [ 1.0000000] total memory = 1024 MB [ 1.0000000] avail memory = 985 MB [ 1.0000000] armfdt0 (root) [ 1.0000000] simplebus0 at armfdt0: Hardkernel ODROID-C1 [ 1.0000000] simplebus1 at simplebus0 [ 1.0000000] simplebus2 at simplebus0 [ 1.0000000] cpus0 at simplebus0 [ 1.0000000] simplebus3 at simplebus0 [ 1.0000000] simplebus4 at simplebus0 [ 1.0000000] cpu0 at cpus0: Cortex-A5 r0p1 (Cortex V7A core) [ 1.0000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.0000000] cpu0: L1 32KB/32B 2-way (512 set) VIPT Instruction cache [ 1.0000000] cpu0: L1 32KB/32B 4-way (256 set) write-back-locking-C PIPT Data cache [ 1.0000000] cpu0: L2 512KB/32B 8-way (2048 set) write-back PIPT Unified cache [ 1.0000000] vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals [ 1.0000000] cpufreqdt0 at cpu0 [ 1.0000000] cpu1 at cpus0: Cortex-A5 r0p1 (Cortex V7A core) [ 1.0000000] cpu1: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.0000000] cpu1: L1 32KB/32B 2-way (512 set) VIPT Instruction cache [ 1.0000000] cpu1: L1 32KB/32B 4-way (256 set) write-back-locking-C PIPT Data cache [ 1.0000000] cpu1: L2 512KB/32B 8-way (2048 set) write-back PIPT Unified cache [ 1.0000000] vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals [ 1.0000000] cpufreqdt1 at cpu1 [ 1.0000000] cpu2 at cpus0: Cortex-A5 r0p1 (Cortex V7A core) [ 1.0000000] cpu2: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.0000000] cpu2: L1 32KB/32B 2-way (512 set) VIPT Instruction cache [ 1.0000000] cpu2: L1 32KB/32B 4-way (256 set) write-back-locking-C PIPT Data cache [ 1.0000000] cpu2: L2 512KB/32B 8-way (2048 set) write-back PIPT Unified cache [ 1.0000000] vfp2 at cpu2: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals [ 1.0000000] cpufreqdt2 at cpu2 [ 1.0000000] cpu3 at cpus0: Cortex-A5 r0p1 (Cortex V7A core) [ 1.0000000] cpu3: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.0000000] cpu3: L1 32KB/32B 2-way (512 set) VIPT Instruction cache [ 1.0000000] cpu3: L1 32KB/32B 4-way (256 set) write-back-locking-C PIPT Data cache [ 1.0000000] cpu3: L2 512KB/32B 8-way (2048 set) write-back PIPT Unified cache [ 1.0000000] vfp3 at cpu3: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals [ 1.0000000] cpufreqdt3 at cpu3 [ 1.0000000] simplebus5 at simplebus1 [ 1.0000000] simplebus6 at simplebus1 [ 1.0000000] simplebus7 at simplebus1 [ 1.0000000] simplebus8 at simplebus1 [ 1.0000000] simplebus9 at simplebus2 [ 1.0000000] gic0 at simplebus5: GIC [ 1.0000000] armgic0 at gic0: Generic Interrupt Controller, 256 sources (245 valid) [ 1.0000000] armgic0: 32 Priorities, 224 SPIs, 5 PPIs, 16 SGIs [ 1.0000000] fclock0 at simplebus0: 24000000 Hz fixed clock (xtal) [ 1.0000000] syscon0 at simplebus7: System Controller Registers [ 1.0000000] syscon1 at simplebus6: System Controller Registers [ 1.0000000] syscon2 at simplebus8: System Controller Registers [ 1.0000000] fclock1 at simplebus0: 32768 Hz fixed clock (RTC32K) [ 1.0000000] syscon3 at simplebus6: System Controller Registers [ 1.0000000] syscon4 at simplebus6: System Controller Registers [ 1.0000000] syscon5 at simplebus1: System Controller Registers [ 1.0000000] mesonresets0 at simplebus6 [ 1.0000000] meson8bclkc0 at syscon1: Meson8b clock controller [ 1.0000000] mesonpinctrl0 at simplebus6: Meson8b CBUS GPIO [ 1.0000000] gpio0 at mesonpinctrl0: 71 pins [ 1.0000000] mesonpinctrl1 at simplebus7: Meson8b AO GPIO [ 1.0000000] mesonpinctrl1: usb-hub-reset GPIOAO_4 set to output (high) [ 1.0000000] gpio1 at mesonpinctrl1: 14 pins [ 1.0000000] l2cc0 at simplebus1 [ 1.0000000] arml2cc0 at l2cc0: ARM PL310 r3p3 L2 Cache Controller (disabled) [ 1.0000000] arml2cc0: cache enabled [ 1.0000000] a9ptmr0 at simplebus5 [ 1.0000000] a9ptmr0: interrupting on GIC irq 29 [ 1.0000000] arma9ptmr0 at a9ptmr0: A5 Private Timer (300 MHz) [ 1.0000000] gregulator0 at simplebus0: TF_IO [ 1.0000000] mesonuart0 at simplebus7: console [ 1.0000000] mesonuart0: interrupting on GIC irq 122 [ 1.0000000] fregulator0 at simplebus0: VCC1V8 [ 1.0000000] fregulator1 at simplebus0: TFLASH_VDD [ 1.0000000] fregulator2 at simplebus0: VCC3V3 [ 1.0000000] fregulator3 at simplebus0: VDD_RTC [ 1.0000000] fregulator4 at simplebus0: P5V0 [ 1.0000000] fregulator5 at simplebus0: DDR_VDDC [ 1.0000000] mesonusbphy0 at simplebus6: USB2 PHY (host) [ 1.0000000] /soc/cbus@c1100000/adc@8680 at simplebus6 not configured [ 1.0000000] /bus@c8000000/clock-controller@400 at simplebus2 not configured [ 1.0000000] /soc/secbus@da000000/nvmem@0 at simplebus8 not configured [ 1.0000000] mmcpwrseq0 at simplebus0: eMMC hardware reset provider [ 1.0000000] /soc/sram@d9000000 at simplebus1 not configured [ 1.0000000] /soc/cbus@c1100000/system-controller@4000/power-controller at syscon1 not configured [ 1.0000000] awge0 at simplebus1: Gigabit Ethernet Controller [ 1.0000000] awge0: interrupting on GIC irq 40 [ 1.0000000] awge0: Core version: 00001037 [ 1.0000000] awge0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] awge0: HW feature mask: 100d4f37 [ 1.0000000] rgephy0 at awge0 phy 0: RTL8211F 1000BASE-T media interface [ 1.0000000] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 1.0000000] /soc/cbus@c1100000/interrupt-controller@9880 at simplebus6 not configured [ 1.0000000] /opp-table at simplebus0 not configured [ 1.0000000] /regulator-vcck at simplebus0 not configured [ 1.0000000] /thermal-sensor at simplebus0 not configured [ 1.0000000] /bus@d0000000/gpu@c0000 at simplebus3 not configured [ 1.0000000] /gpu-opp-table at simplebus0 not configured [ 1.0000000] /regulator-vddee at simplebus0 not configured [ 1.0000000] /soc/cbus@c1100000/pwm@8650 at simplebus6 not configured [ 1.0000000] mesonrng0 at simplebus6: Hardware RNG [ 1.0000000] mesonsdio0 at simplebus6: SDIO controller (port B) [ 1.0000000] mesonsdio0: interrupting on GIC irq 60 [ 1.0000000] mesonsdio0: core 159375000 Hz, clkin 159375000 Hz [ 1.0000000] mesonsdhc0 at simplebus6: couldn't get mmc slot [ 1.0000000] mesonwdt0 at simplebus6: EE-watchdog [ 1.0000000] meson6timer0 at simplebus6: Timers [ 1.0000040] /soc/aobus@c8100000/ir-receiver@480 at simplebus7 not configured [ 1.0000040] dwctwo0 at simplebus1: DesignWare USB2 OTG [ 1.0000040] dwctwo0: interrupting on GIC irq 63 [ 1.0000040] /bus@c8000000/bus@6000/video-lut@48 at simplebus9 not configured [ 1.0000040] mesonfb0 at simplebus0 [ 1.0000040] wsdisplay0 at mesonfb0 kbdmux 1: console (default, vt100 emulation) [ 1.0000040] /iio-hwmon at simplebus0 not configured [ 1.0000040] armpmu0 at simplebus0: Performance Monitor Unit [ 1.0000040] gpioleds0 at simplebus0: c1:blue:alive [ 1.0000040] /soc/bus@c4300000/scu@0 at simplebus5 not configured [ 1.0000040] /soc/cbus@c1100000/clock-measure@8758 at simplebus6 not configured [ 1.1464860] entropy: ready [ 1.1464860] cpufreqdt0: couldn't acquire cpu-supply [ 1.1526380] cpufreqdt1: rate: 1536.000 MHz, 1140000 uV [ 1.1526380] sdmmc0 at mesonsdio0 [ 1.1526380] usb0 at dwctwo0: USB revision 2.0 [ 1.1698300] armpmu0: interrupting on GIC irq 169 [ 1.1698300] armpmu0: interrupting on GIC irq 170 [ 1.1698300] armpmu0: interrupting on GIC irq 185 [ 1.1815670] armpmu0: interrupting on GIC irq 186 [ 1.1915660] uhub0 at usb0: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.2715640] sdmmc0: direct I/O error 22, r=6 p=0xbd77bf14 write [ 2.4615650] sdmmc0: SD card status: 4-bit, C10, U1 [ 2.4615650] ld0 at sdmmc0: <0x03:0x5344:SL08G:0x80:0x635a93a5:0x122> [ 2.4615650] ld0: 7580 MB, 3850 cyl, 64 head, 63 sec, 512 bytes/sect x 15523840 sectors [ 2.4815650] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz [ 2.7015640] uhub1 at uhub0 port 1: vendor 05e3 (0x05e3) USB2.0 Hub (0x0610), class 9/0, rev 2.00/32.98, addr 2 [ 2.7015640] uhub1: multiple transaction translators [ 3.0515640] uhub0: illegal enable change, port 1 [ 3.0515640] swwdog0: software watchdog initialized [ 3.0515640] WARNING: 3 errors while detecting hardware; check system log. [ 3.0615670] boot device: ld0 [ 3.0615670] root on ld0a dumps on ld0b [ 3.0715640] root file system type: ffs [ 3.0715640] kern.module.path=/stand/evbarm/10.0/modules [ 3.0815670] WARNING: no TOD clock present [ 3.0815670] WARNING: using filesystem time [ 3.0891050] WARNING: CHECK AND RESET THE DATE!