Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2022-12-27 15:55:54
From: skrll
Description: RPI model B
[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[     1.000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[     1.000000]     2018, 2019, 2020, 2021, 2022
[     1.000000]     The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 10.0_BETA (RPI) #0: Mon Dec 26 11:25:01 UTC 2022
[     1.000000]         [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/RPI
[     1.000000] total memory = 192 MB
[     1.000000] avail memory = 177 MB
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] armfdt0 (root)
[     1.000000] simplebus0 at armfdt0: Raspberry Pi Model B Rev 1
[     1.000000] simplebus1 at simplebus0
[     1.000000] simplebus2 at simplebus0
[     1.000000] simplebus3 at simplebus0
[     1.000000] cpus0 at simplebus0
[     1.000000] cpu0 at cpus0: 700 MHz ARM1176JZ-S r0p7 (ARM11J V6ZK core)
[     1.000000] cpu0: DC enabled IC enabled WB enabled LABT
[     1.000000] cpu0: L1 16KB/32B 4-way (128 set) VIPT Instruction cache
[     1.000000] cpu0: L1 16KB/32B 4-way (128 set) write-back-locking-C VIPT Data cache
[     1.000000] vfp0 at cpu0: VFP11, rounding, exceptions
[     1.000000] fclock0 at simplebus2: 19200000 Hz fixed clock (osc)
[     1.000000] fclock1 at simplebus2: 480000000 Hz fixed clock (otg)
[     1.000000] bcmicu0 at simplebus1
[     1.000000] bcmcprman0 at simplebus1: BCM283x Clock Controller
[     1.000000] bcmtmr0 at simplebus1: VC System Timer
[     1.000000] bcmtmr0: interrupting on icu irq 3
[     1.000000] bcmaux0 at simplebus1
[     1.000000] /soc/thermal@7e212000 at simplebus1 not configured
[     1.000000] bcmgpio0 at simplebus1: GPIO controller 2835
[     1.000000] bcmgpio0: pins 0..31 interrupting on icu irq 49
[     1.000000] bcmgpio0: pins 32..54 interrupting on icu irq 50
[     1.000000] gpio0 at bcmgpio0: 54 pins
[     1.000000] bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 DMA10 DMA11
[     1.000000] /soc/power at simplebus1 not configured
[     1.000000] /phy at simplebus0 not configured
[     1.000000] bsciic0 at simplebus1: Broadcom Serial Controller
[     1.000000] bsciic0: interrupting on icu irq 53
[     1.000000] iic0 at bsciic0: I2C bus
[     1.000000] bcmmbox0 at simplebus1: VC mailbox
[     1.000000] bcmmbox0: interrupting on icu irq 65
[     1.000000] vcmbox0 at bcmmbox0
[     1.000000] /soc/firmware at simplebus1 not configured
[     1.000000] /soc/txp@7e004000 at simplebus1 not configured
[     1.000000] plcom0 at simplebus1: ARM PL011 UART
[     1.000000] plcom0: txfifo disabled
[     1.000000] plcom0: console
[     1.000000] plcom0: interrupting on icu irq 57
[     1.000000] bcmsdhost0 at simplebus1: SD HOST controller
[     1.000000] bcmsdhost0: interrupting on icu irq 56
[     1.000000] bsciic1 at simplebus1: Broadcom Serial Controller
[     1.000000] bsciic1: interrupting on icu irq 53
[     1.000000] iic1 at bsciic1: I2C bus
[     1.000000] /soc/pwm@7e20c000 at simplebus1 not configured
[     1.000000] bsciic2 at simplebus1: Broadcom Serial Controller
[     1.000000] bsciic2: interrupting on icu irq 53
[     1.000000] iic2 at bsciic2: I2C bus
[     1.000000] dwctwo0 at simplebus1: USB controller
[     1.000000] dwctwo0: interrupting on icu irq 9
[     1.000000] bcmpmwdog0 at simplebus1: Power management, Reset and Watchdog controller
[     1.000000] /soc/vec@7e806000 at simplebus1 not configured
[     1.000000] /soc/hdmi@7e902000 at simplebus1 not configured
[     1.000000] /soc/gpu at simplebus1 not configured
[     1.000000] genfb0 at simplebus1
[     1.000000] genfb0: framebuffer at 0x4e876000, size 1280x720, depth 32, stride 5120
[     1.000000] wsdisplay0 at genfb0 kbdmux 1
[     1.000000] wsmux1: connecting to wsdisplay0
[     1.000000] wsdisplay0: screen 0-3 added (default, vt100 emulation)
[     1.000000] vchiq0 at simplebus1: BCM2835 VCHIQ
[     1.000000] /arm-pmu at simplebus0 not configured
[     1.000000] gpioleds0 at simplebus0: ACT
[     1.000000] bcmrng0 at simplebus1: RNG
[     1.000000] entropy: ready
[     1.000000] timecounter: Timecounter "bcmtmr0" frequency 1000000 Hz quality 100
[     1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[     1.039987] sdmmc0 at bcmsdhost0
[     1.039987] dwctwo0: Core Release: 2.80a (snpsid=4f54280a)
[     1.039987] usb0 at dwctwo0: USB revision 2.0
[     1.060978] IPsec: Initialized Security Association Processing.
[     1.071033] uhub0 at usb0: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[     1.081169] uhub0: 1 port with 1 removable, self powered
[     1.151277] sdmmc0: direct I/O error 5, r=6 p=0xc5206f14 write
[     1.161298] sdmmc0: SD card status: 4-bit, C10
[     1.161298] ld0 at sdmmc0: <0x1d:0x4144:SD   :0x10:0xb1820735:0x0c7>
[     1.174703] ld0: 7647 MB, 3884 cyl, 64 head, 63 sec, 512 bytes/sect x 15661056 sectors
[     1.184726] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
[     1.715346] uhub1 at uhub0 port 1: vendor 0424 (0x0424) product 9512 (0x9512), class 9/0, rev 2.00/2.00, addr 2
[     1.725899] uhub1: multiple transaction translators
[     1.725899] uhub1: 3 ports with 2 removable, self powered
[     2.556791] usmsc0 at uhub1 port 1
[     2.556791] usmsc0: vendor 0424 (0x0424) product ec00 (0xec00), rev 2.00/2.00, addr 3
[     2.568152] smscphy0 at usmsc0 phy 1: SMSC LAN8700 10/100 Ethernet Transceiver, rev. 3
[     2.582479] smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[     2.582479] usmsc0: Ethernet address [_MAC_XXXXXXXXXX]
[     3.136789] uftdi0 at uhub1 port 2 configuration 1 interface 0
[     3.136789] uftdi0: FTDI (0x0403) FT230X Basic UART (0x6015), rev 2.00/10.00, addr 4
[     3.150554] ucom0 at uftdi0 portno 1
[     3.641111] uhub2 at uhub1 port 3: vendor 0424 (0x0424) product 2514 (0x2514), class 9/0, rev 2.00/b.b3, addr 5
[     3.651831] uhub2: multiple transaction translators
[     3.651831] uhub2: 4 ports with 4 removable, self powered
[     4.482756] uftdi1 at uhub2 port 1 configuration 1 interface 0
[     4.482756] uftdi1: FTDI (0x0403) Quad RS232-HS (0x6011), rev 2.00/8.00, addr 6
[     4.498622] ucom1 at uftdi1 portno 1
[     4.498622] uftdi2 at uhub2 port 1 configuration 1 interface 1
[     4.498622] uftdi2: FTDI (0x0403) Quad RS232-HS (0x6011), rev 2.00/8.00, addr 6
[     4.515288] ucom2 at uftdi2 portno 2
[     4.515288] uftdi3 at uhub2 port 1 configuration 1 interface 2
[     4.515288] uftdi3: FTDI (0x0403) Quad RS232-HS (0x6011), rev 2.00/8.00, addr 6
[     4.531955] ucom3 at uftdi3 portno 3
[     4.531955] uftdi4 at uhub2 port 1 configuration 1 interface 3
[     4.531955] uftdi4: FTDI (0x0403) Quad RS232-HS (0x6011), rev 2.00/8.00, addr 6
[     4.548629] ucom4 at uftdi4 portno 4
[     4.548629] uhub0: autoconfiguration error: illegal enable change, port 1
[     4.558659] swwdog0: software watchdog initialized
[     4.568693] WARNING: 1 error while detecting hardware; check system log.
[     4.568693] boot device: ld0
[     4.580778] root on ld0a dumps on ld0b
[     4.590804] root file system type: ffs
[     4.590804] kern.module.path=/stand/evbarm/10.0/modules
[     4.603148] vchiq0: interrupting on icu irq 66
[     4.603148] vchiq: vchiq_init_state: slot_zero = 0xc5660000, is_master = 0
[     4.603148] vchiq: local ver 8 (min 3), remote ver 8.
[     4.613185] vcaudio0 at vchiq0: auds
[     4.613185] WARNING: no TOD clock present
[     4.613185] WARNING: using filesystem time
[     4.625813] WARNING: CHECK AND RESET THE DATE!
[     4.625813] audio0 at vcaudio0: playback
[     4.625813] audio0: slinear_le:16 -> slinear_le:16 2ch 48000Hz, blk 7680 bytes (40ms) for playback
[     4.643783] spkr0 at audio0: PC Speaker (synthesized)
[     4.643783] wsbell at spkr0 not configured
[    34.995426] wsdisplay0: screen 4 added (default, vt100 emulation)