Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2022-12-27 22:45:09
From: ocb
Description: NetBSD 9.3 Dell Latitude D410
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020, 2021, 2022 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 9.3 (GENERIC_DELL) #1: Tue Oct 18 15:51:07 CEST 2022 [ 1.000000] build@dc:/home/build/source-9.3/obj/sys/arch/i386/compile/GENERIC_DELL [ 1.000000] total memory = 1271 MB [ 1.000000] avail memory = 1235 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.000003] Dell Inc. Latitude D410 [ 1.000003] mainbus0 (root) [ 1.000003] ACPI: RSDP 0x00000000000FC9B0 000014 (v00 DELL ) [ 1.000003] ACPI: RSDT 0x000000004F7D1F90 000040 (v01 DELL CPi R 27D5091C ASL 00000061) [ 1.000003] ACPI: FACP 0x000000004F7D2C00 000074 (v01 DELL CPi R 27D5091C ASL 00000061) [ 1.000003] ACPI: DSDT 0x000000004F7D3800 00390B (v01 INT430 SYSFexxx 00001001 MSFT 0100000E) [ 1.000003] ACPI: FACS 0x000000004F7E2000 000040 [ 1.000003] ACPI: APIC 0x000000004F7D3400 000068 (v01 DELL CPi R 27D5091C ASL 00000047) [ 1.000003] ACPI: ASF! 0x000000004F7D3000 00005B (v16 DELL CPi R 27D5091C ASL 00000061) [ 1.000003] ACPI: MCFG 0x000000004F7D33C0 00003E (v16 DELL CPi R 27D5091C ASL 00000061) [ 1.000003] ACPI: SSDT 0x000000004F7D23E6 000280 (v01 PmRef Cpu0Ist 00003000 INTL 20030522) [ 1.000003] ACPI: SSDT 0x000000004F7D220E 0001D8 (v01 PmRef Cpu0Cst 00003001 INTL 20030522) [ 1.000003] ACPI: SSDT 0x000000004F7D2013 0001FB (v01 PmRef CpuPm 00003000 INTL 20030522) [ 1.000003] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 1.000003] ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins [ 1.000003] cpu0 at mainbus0 apid 0 [ 1.000003] cpu0: Intel(R) Pentium(R) M processor 1.86GHz, id 0x6d8 [ 1.000003] cpu0: package 0, core 0, smt 0 [ 1.000003] acpi0 at mainbus0: Intel ACPICA 20190405 [ 1.000003] acpi0: X/RSDT: OemId <DELL , CPi R ,27d5091c>, AslId <ASL ,00000061> [ 1.000003] ACPI: Dynamic OEM Table Load: [ 1.000003] ACPI: SSDT 0x00000000C24FA484 000043 (v01 LMPWR DELLLOM 00001001 INTL 20030522) [ 1.000003] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000 [ 1.000003] acpi0: SCI interrupting at int 9 [ 1.000003] timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 [ 1.019165] acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter [ 1.019165] acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery [ 1.019165] acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery [ 1.019165] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch [ 1.019165] acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button [ 1.019165] acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button [ 1.019165] MB1 (PNP0C01) at acpi0 not configured [ 1.019165] MB2 (PNP0C01) at acpi0 not configured [ 1.019165] MB3 (PNP0C01) at acpi0 not configured [ 1.019165] pckbc0 at acpi0 (PS2M, PNP0F13) (aux port): irq 12 [ 1.019165] pckbc1 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64,0x62,0x66 irq 1 [ 1.019165] attimer0 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 2 [ 1.019165] pcppi0 at acpi0 (SPKR, PNP0800): io 0x61,0x63,0x65,0x67 [ 1.019165] midi0 at pcppi0: PC speaker [ 1.019165] sysbeep0 at pcppi0 [ 1.019165] MB4 (PNP0C01) at acpi0 not configured [ 1.019165] COPR (PNP0C04) at acpi0 not configured [ 1.019165] FTPM (PNP0C01) at acpi0 not configured [ 1.019165] acpivga0 at acpi0 (VID): ACPI Display Adapter [ 1.019165] acpiout0 at acpivga0 (TV, 0x0200): ACPI Display Output Device [ 1.019165] acpiout1 at acpivga0 (CRT, 0x0100): ACPI Display Output Device [ 1.019165] acpiout2 at acpivga0 (LCD, 0x0400): ACPI Display Output Device [ 1.019165] acpiout3 at acpivga0 (DVI, 0x0300): ACPI Display Output Device [ 1.019165] acpivga0: connected output devices: [ 1.019165] acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0, bios detect [ 1.019165] acpivga0: 0x0200 (acpiout0): TV, head 0, bios detect [ 1.019165] acpivga0: 0x0400 (acpiout2): Unknown Output Device, head 0, bios detect [ 1.019165] acpivga0: 0x0300 (acpiout3): Unknown Output Device, head 0, bios detect [ 1.019165] acpivga1 at acpi0 (VID2): ACPI Display Adapter [ 1.019165] acpivga1: autoconfiguration error: failed to evaluate \_SB_.PCI0.VID2._DOD: AE_BAD_DATA [ 1.019165] MB7 (PNP0C01) at acpi0 not configured [ 1.019165] acpitz0 at acpi0 (THM) [ 1.019165] acpitz0: levels: critical 100.0 C, passive cooling [ 1.019165] apm0 at acpi0: Power Management spec V1.2 [ 1.019165] ACPI: Enabled 2 GPEs in block 00 to 1F [ 1.019165] pckbd0 at pckbc1 (kbd slot) [ 1.019165] pckbc1: using irq 1 for kbd slot [ 1.019165] wskbd0 at pckbd0: console keyboard [ 1.019165] pms0 at pckbc1 (aux slot) [ 1.019165] pckbc1: using irq 12 for aux slot [ 1.019165] wsmouse0 at pms0 mux 0 [ 1.019165] attimer0: attached to pcppi0 [ 1.019165] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.019165] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.019165] pchb0 at pci0 dev 0 function 0: vendor 8086 product 2590 (rev. 0x03) [ 1.019165] agp0 at pchb0: i915-family chipset [ 1.019165] agp0: detected 7932k stolen memory [ 1.019165] agp0: aperture at 0xc0000000, size 0x10000000 [ 1.019165] i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 2592 (rev. 0x03) [ 1.019165] vendor 8086 product 2792 (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured [ 1.019165] ppb0 at pci0 dev 28 function 0: vendor 8086 product 2660 (rev. 0x03) [ 1.019165] ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s [ 1.019165] pci1 at ppb0 bus 1 [ 1.019165] pci1: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.019165] bge0 at pci1 dev 0 function 0: Broadcom BCM5751 Gigabit Ethernet [ 1.019165] bge0: interrupting at ioapic0 pin 16 [ 1.019165] bge0: HW config 00000151, 0001c011, 00000000, 00000000 00000000 [ 1.019165] bge0: ASIC BCM5750 A1 (0x4001), Ethernet address [_MAC_XXXXXXXXXX] [ 1.019165] bge0: setting short Tx thresholds [ 1.019165] brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0 [ 1.019165] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.019165] uhci0 at pci0 dev 29 function 0: vendor 8086 product 2658 (rev. 0x03) [ 1.019165] uhci0: interrupting at ioapic0 pin 16 [ 1.019165] usb0 at uhci0: USB revision 1.0 [ 1.019165] uhci1 at pci0 dev 29 function 1: vendor 8086 product 2659 (rev. 0x03) [ 1.019165] uhci1: interrupting at ioapic0 pin 17 [ 1.019165] usb1 at uhci1: USB revision 1.0 [ 1.019165] uhci2 at pci0 dev 29 function 2: vendor 8086 product 265a (rev. 0x03) [ 1.019165] uhci2: interrupting at ioapic0 pin 18 [ 1.019165] usb2 at uhci2: USB revision 1.0 [ 1.019165] uhci3 at pci0 dev 29 function 3: vendor 8086 product 265b (rev. 0x03) [ 1.019165] uhci3: interrupting at ioapic0 pin 19 [ 1.019165] usb3 at uhci3: USB revision 1.0 [ 1.019165] ehci0 at pci0 dev 29 function 7: vendor 8086 product 265c (rev. 0x03) [ 1.019165] ehci0: interrupting at ioapic0 pin 16 [ 1.019165] ehci0: EHCI version 1.0 [ 1.019165] ehci0: 4 companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 [ 1.019165] usb4 at ehci0: USB revision 2.0 [ 1.019165] ppb1 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0xd3) [ 1.019165] pci2 at ppb1 bus 2 [ 1.019165] pci2: i/o space, memory space enabled [ 1.019165] cbb0 at pci2 dev 1 function 0: vendor 104c product 8036 (rev. 0x00) [ 1.019165] vendor 104c product 8038 (miscellaneous communications) at pci2 dev 1 function 5 not configured [ 1.019165] iwi0 at pci2 dev 3 function 0: vendor 8086 product 4220 (rev. 0x05) [ 1.019165] iwi0: interrupting at ioapic0 pin 17 [ 1.019165] iwi0: 802.11 address [_MAC_XXXXXXXXXX] [ 1.019165] iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 1.019165] iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 1.019165] cbb0: cacheline 0x10 lattimer 0x40 [ 1.019165] cbb0: bhlc 0x824010 [ 1.019165] cbb0: interrupting at ioapic0 pin 19 [ 1.019165] cardslot0 at cbb0 [ 1.019165] cardbus0 at cardslot0: bus 3 [ 1.019165] pcmcia0 at cardslot0 [ 1.019165] auich0 at pci0 dev 30 function 2: i82801FB (ICH6) AC-97 Audio [ 1.019165] auich0: interrupting at ioapic0 pin 16 [ 1.019165] auich0: ac97: SigmaTel STAC9750/51 codec; headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D [ 1.019165] auich0: ac97: ext id 0x605<AC97_22,AMAP,SPDIF,VRA> [ 1.019165] vendor 8086 product 266d (modem communications, revision 0x03) at pci0 dev 30 function 3 not configured [ 1.019165] ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 2641 (rev. 0x03) [ 1.019165] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 [ 1.656278] ichlpcib0: 24-bit timer [ 1.656278] tco0 at ichlpcib0: TCO (watchdog) timer configured. [ 1.656278] tco0: Min/Max interval 1/367 seconds [ 1.656278] piixide0 at pci0 dev 31 function 1: Intel 82801FB IDE Controller (ICH6) (rev. 0x03) [ 1.656278] piixide0: bus-master DMA support present [ 1.656278] piixide0: primary channel configured to compatibility mode [ 1.656278] piixide0: primary channel interrupting at ioapic0 pin 14 [ 1.656278] atabus0 at piixide0 channel 0 [ 1.656278] piixide0: secondary channel configured to compatibility mode [ 1.656278] piixide0: secondary channel ignored (disabled) [ 1.656278] isa0 at ichlpcib0 [ 1.656278] acpicpu0 at cpu0: ACPI CPU [ 1.656278] acpicpu0: C1: HLT, lat 0 us, pow 0 mW [ 1.656278] acpicpu0: C2: I/O, lat 50 us, pow 0 mW [ 1.656278] acpicpu0: C3: I/O, lat 50 us, pow 0 mW [ 1.656278] acpicpu0: P0: FFH, lat 10 us, pow 27000 mW, 1867 MHz [ 1.656278] acpicpu0: P1: FFH, lat 10 us, pow 23000 mW, 1600 MHz [ 1.656278] acpicpu0: P2: FFH, lat 10 us, pow 20000 mW, 1333 MHz [ 1.656278] acpicpu0: P3: FFH, lat 10 us, pow 17000 mW, 1067 MHz [ 1.656278] acpicpu0: P4: FFH, lat 10 us, pow 13000 mW, 800 MHz [ 1.656278] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % [ 1.656278] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % [ 1.656278] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % [ 1.656278] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % [ 1.656278] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % [ 1.656278] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % [ 1.656278] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % [ 1.656278] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % [ 1.656278] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.656278] acpiacad0: AC adapter online. [ 1.999375] auich0: measured ac97 link rate at 47995 Hz, will use 48000 Hz [ 1.999375] audio at auich0 not configured [ 2.019398] acpibat0: Sony LION rechargeable battery [ 2.019398] acpibat0: granularity: low->warn 0.048 Ah, warn->full 0.048 Ah [ 2.029404] uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 2.029404] uhub0: 2 ports with 2 removable, self powered [ 2.029404] uhub1 at usb1: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 2.029404] uhub1: 2 ports with 2 removable, self powered [ 2.029404] uhub2 at usb2: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 2.029404] uhub2: 2 ports with 2 removable, self powered [ 2.029404] uhub3 at usb3: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 2.029404] uhub3: 2 ports with 2 removable, self powered [ 2.029404] uhub4 at usb4: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 [ 2.029404] uhub4: 8 ports with 8 removable, self powered [ 2.059531] IPsec: Initialized Security Association Processing. [ 5.041370] wd0 at atabus0 drive 0 [ 5.041370] wd0: <HTS548060M9AT00> [ 5.041370] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 5.041370] wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors [ 5.081395] wd0: GPT GUID: 2c37db78-fd55-469e-90e9-70336524f192 [ 5.091401] dk0 at wd0: "cgd.conf", 262144 blocks at 4096, type: ffs [ 5.091401] dk1 at wd0: "syscgd", 116940800 blocks at 266240, type: cgd [ 5.101407] wd0: 32-bit data port [ 5.101407] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) [ 5.101407] wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) [ 5.101407] WARNING: 1 error while detecting hardware; check system log. [ 5.121419] boot device: wd0 [ 5.121419] md0: internal 5000 KB image area [ 5.121419] root on md0a dumps on md0b [ 5.121419] root file system type: ffs [ 5.121419] kern.module.path=/stand/i386/9.3/modules [ 5.131426] kern info: [drm] Memory usable by graphics device = 256M [ 5.131426] kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.131426] kern info: [drm] Driver supports precise vblank timestamp query. [ 5.131426] i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0) [ 5.131426] WARNING: clock gained 145 days [ 5.261505] ubt0 at uhub1 port 1 [ 5.261505] ubt0: vendor 413c (0x413c) product 8103 (0x8103), rev 2.00/24.22, addr 2 [ 5.301530] kern info: [drm] initialized overlay support [ 5.671759] intelfb0 at i915drmkms0 [ 5.671759] intelfb0: framebuffer at 0xdb2c9000, size 1024x768, depth 32, stride 4096 [ 7.032598] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 [ 7.044810] wsmux1: connecting to wsdisplay0 [ 23.832958] wsdisplay0: screen 1 added (default, vt100 emulation) [ 23.832958] wsdisplay0: screen 2 added (default, vt100 emulation) [ 23.832958] wsdisplay0: screen 3 added (default, vt100 emulation) [ 23.832958] wsdisplay0: screen 4 added (default, vt100 emulation)