Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-01-07 09:31:41
From: skrll
Description: HPPA C3700 workstation
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020, 2021, 2022 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.99.1 (GENERIC) #0: Mon Dec 19 01:51:29 UTC 2022 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/hppa/compile/GENERIC [ 1.000000] HP9000/785/C3700 [ 1.000000] real mem = 1024 MB (73728 reserved for PROM, 1010 MB used by NetBSD) [ 1.000000] avail mem = 986 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] mainbus0 (root) [flex fff80000] [ 1.000000] pdc0 at mainbus0 [ 1.000000] power0 at mainbus0 [ 1.000000] cpu0 at mainbus0 hpa 0xfffa0000 path 32 irq 31: PA8700 (Piranha) rev 0 [ 1.000000] cpu0: PCXW2, PA-RISC 2.0, lev 1, cat A, 750 MHz clk [ 1.000000] cpu0: shadows, 1536K/768K D/I caches, 240 shared TLB, 0/0 D/I BTLBs [ 1.000000] cpu0: PCXW2 floating point, rev 1 [ 1.000000] mem0 at mainbus0 hpa 0xfed10200 path 49: size 1024MB [ 1.000000] astro0 at mainbus0 hpa 0xfed00000 path 10: Astro rev 2.1 [ 1.000000] elroy0 at astro0 hpa 0xfed30000 path 10/0: Elroy TR4.0 APIC ver 20, 7 pins [ 1.000000] pci0 at elroy0 bus 0 [ 1.000000] pci0: i/o space, memory space enabled [ 1.000000] tlp0 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1 [ 1.000000] tlp0: interrupting at line 2 irq 30 [ 1.000000] tlp0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3 [ 1.000000] lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000000] Analog Devices AD1889 PCI SoundMAX Controller (audio multimedia) at pci0 dev 13 function 0 not configured [ 1.000000] nside0 at pci0 dev 14 function 0: National Semiconductor PC87415 IDE Controller (rev. 0x03) [ 1.000000] nside0: bus-master DMA support present [ 1.000000] nside0: primary channel configured to native-PCI mode [ 1.000000] nside0: using line 0 irq 29 for native-PCI interrupt [ 1.000000] atabus0 at nside0 channel 0 [ 1.000000] nside0: secondary channel configured to native-PCI mode [ 1.000000] atabus1 at nside0 channel 1 [ 1.000000] ssio0 at pci0 dev 14 function 1: National Semiconductor 87560 Legacy I/O (rev. 0x01) [ 1.000000] ssio0: interrupting at line 0 irq 29 [ 1.000000] com0 at ssio0 offset 3f8 irq 4: ns16550a, 16-byte FIFO [ 1.000000] com0: console [ 1.000000] com1 at ssio0 offset 2f8 irq 3: ns16550a, 16-byte FIFO [ 1.000000] lpt0 at ssio0 offset 378 irq 7 [ 1.000000] ohci0 at pci0 dev 14 function 2: National Semiconductor USB (rev. 0x02) [ 1.000000] ohci0: interrupting at line 0 irq 29 [ 1.000000] ohci0: OHCI version 1.0, legacy support [ 1.000000] usb0 at ohci0: USB revision 1.0 [ 1.000000] esiop0 at pci0 dev 15 function 0: Symbios Logic 53c896 (ultra2-wide scsi) [ 1.000000] esiop0: using on-board RAM [ 1.000000] esiop0: interrupting at line 1 irq 26 [ 1.000000] scsibus0 at esiop0: 16 targets, 8 luns per target [ 1.000000] esiop1 at pci0 dev 15 function 1: Symbios Logic 53c896 (ultra2-wide scsi) [ 1.000000] esiop1: using on-board RAM [ 1.000000] esiop1: interrupting at line 1 irq 26 [ 1.000000] scsibus1 at esiop1: 16 targets, 8 luns per target [ 1.000000] elroy1 at astro0 hpa 0xfed32000 path 10/1: Elroy TR4.0 APIC ver 20, 7 pins [ 1.000000] pci1 at elroy1 bus 0 [ 1.000000] pci1: i/o space, memory space enabled [ 1.000000] elroy2 at astro0 hpa 0xfed38000 path 10/4: Elroy TR4.0 APIC ver 20, 7 pins [ 1.000000] pci2 at elroy2 bus 0 [ 1.000000] pci2: i/o space, memory space enabled [ 1.000000] elroy3 at astro0 hpa 0xfed3c000 path 10/6: Elroy TR4.0 APIC ver 20, 7 pins [ 1.000000] pci3 at elroy3 bus 0 [ 1.000000] pci3: i/o space, memory space enabled [ 1.000000] sti0 at pci3 dev 2 function 0 [ 1.000000] sti0: rev 8.13;9, ID 0x35ACDA3009A02587 [ 1.000000] sti0: A1299B, 1280x1024 frame buffer, 1280x1024x32 display [ 1.000000] sti0: 10x20 font type 1, 40 bpc, charset 0-255 [ 1.000000] esiop0: switching to single-ended mode [ 1.000000] timecounter: Timecounter "itimer" frequency 750000000 Hz quality 100 [ 1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.009988] scsibus0: waiting 2 seconds for devices to settle... [ 1.081701] scsibus1: waiting 2 seconds for devices to settle... [ 1.153462] wsdisplay0 at sti0 kbdmux 1 [ 1.199222] wsmux1: connecting to wsdisplay0 [ 1.199222] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.307385] uhub0: 3 ports with 3 removable, self powered [ 1.307385] atapibus0 at atabus0: 2 targets [ 1.357305] WARNING: system needs entropy for security; see entropy(7) [ 1.447186] cd0 at atapibus0 drive 0: <SONY CD-RW CRX140E, , 1.0n> cdrom removable [ 1.540764] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) [ 1.540764] cd0(nside0:0:0): using PIO mode 4, DMA mode 2 (using DMA) [ 3.080906] umass0 at uhub0 port 2 configuration 1 interface 0 [ 3.150395] umass0: TOSHIBA (0x0930) TransMemory (0x6544), rev 2.00/1.00, addr 2 [ 3.240878] umass0: using SCSI over Bulk-Only [ 3.240878] scsibus2 at umass0: 2 targets, 1 lun per target [ 9.508113] sd0 at scsibus1 target 5 lun 0: <COMPAQ, BB01813467, 3B07> disk fixed [ 9.599637] sd0: 17365 MB, 7001 cyl, 20 head, 254 sec, 512 bytes/sect x 35565080 sectors [ 9.697710] sd0: sync (25.00ns offset 31), 16-bit (80.000MB/s) transfers, tagged queueing [ 9.797554] sd1 at scsibus1 target 6 lun 0: <COMPAQ, BB01813467, 3B07> disk fixed [ 9.885225] sd1: 17365 MB, 7001 cyl, 20 head, 254 sec, 512 bytes/sect x 35565080 sectors [ 9.983194] sd1: sync (25.00ns offset 31), 16-bit (80.000MB/s) transfers, tagged queueing [ 12.473257] sd2 at scsibus2 target 0 lun 0: <TOSHIBA, TransMemory, 1.00> disk removable [ 12.585451] sd2: fabricating a geometry [ 12.632530] sd2: 29565 MB, 29565 cyl, 64 head, 32 sec, 512 bytes/sect x 60549120 sectors [ 12.727172] swwdog0: software watchdog initialized [ 12.858644] sd2: fabricating a geometry [ 12.936579] boot device: sd0 [ 12.974177] root on sd0a dumps on sd0b [ 13.025779] root file system type: ffs [ 13.071625] kern.module.path=/stand/hppa/10.99.1/modules