Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-01-13 14:50:20
From: mochid
Description: NetBSD 10.99.2/aarch64 NANOPI R5S rk3568
Tianocore/EDK2 firmware version EDK2-DEV
Press ESCAPE for boot options ......
\\-__,------,___.
\\ __,---` NetBSD/evbarm efiboot (arm64)
\\ `---,_. Revision 2.13 (Sat Jan 7 03:27:01 UTC 2023)
\\-,_____,.---`
\\
\\
\\
Press return to boot now, any other key for boot prompt
booting netbsd - starting in 0 seconds.
8503344+3658040+4174816+1742616 [587392+1179864+706490]=0x1601520
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 10.99.2 (GENERIC64) #0: Thu Jan 12 01:19:21 UTC 2023
[ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/GENERIC64
[ 1.0000000] total memory = 3790 MB
[ 1.0000000] avail memory = 3652 MB
[ 1.0000000] entropy: ready
[ 1.0000000] armfdt0 (root)
[ 1.0000000] armfdt0: using EFI runtime services for RTC
[ 1.0000000] simplebus0 at armfdt0: FriendlyElec FriendlyElec NanoPi-R5S
[ 1.0000000] simplebus1 at simplebus0
[ 1.0000000] acpifdt0 at simplebus0
[ 1.0000000] acpifdt0: SMBIOS rev. 3.3.0 @ 0xeca10000
[ 1.0000000] ACPI: RSDP 0x00000000ECAE0018 000024 (v02 RKCP )
[ 1.0000000] ACPI: XSDT 0x00000000ECAEFE98 000054 (v01 RKCP RK356X 00000001 01000013)
[ 1.0000000] ACPI: FACP 0x00000000ECAEFB98 000114 (v06 RKCP RK356X 00000001 EDK2 00000001)
[ 1.0000000] ACPI: DSDT 0x00000000ECAE7518 001147 (v02 RKCP RK356X 00000002 INTL 20200925)
[ 1.0000000] ACPI: DBG2 0x00000000ECAEFA98 00005C (v00 RKCP RK356X 00000001 EDK2 00000001)
[ 1.0000000] ACPI: GTDT 0x00000000ECAEFD18 000068 (v03 RKCP RK356X 00000001 EDK2 00000001)
[ 1.0000000] ACPI: APIC 0x00000000ECAEE998 0001AC (v04 RKCP RK356X 00000001 EDK2 00000001)
[ 1.0000000] ACPI: MCFG 0x00000000ECAEFE18 00003C (v01 RKCP RK356X 00000001 EDK2 00000001)
[ 1.0000000] ACPI: SPCR 0x00000000ECAEFF98 000050 (v02 RKCP RK356X 00000001 EDK2 00000001)
[ 1.0000000] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 1.0000000] acpi0 at acpifdt0: Intel ACPICA 20221020
[ 1.0000000] cpu0 at acpi0: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x0
[ 1.0000000] cpu0: package 0, core 0, smt 0
[ 1.0000000] cpu1 at acpi0I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x100
[ 1.0000000] cpu1: package 0, core 1, smt 0
[ 1.0000000] cpu2 at acpi0I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x200
[ 1.0000000] cpu2: package 0, core 2, smt 0
[ 1.0000000] cpu3 at acpi0I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x300
[ 1.0000000] cpu3: package 0, core 3, smt 0
[ 1.0000000] gicvthree0 at acpi0: GICv3
[ 1.0000000] gicvthree0: GICv2m @ 0xfd410000, SPIs 296-320
[ 1.0000000] gtmr0 at acpi0: irq 27
[ 1.0000000] armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual)
[ 1.0000040] CPU0 (ACPI0007) at acpi0 not configured
[ 1.0000040] CPU1 (ACPI0007) at acpi0 not configured
[ 1.0000040] CPU2 (ACPI0007) at acpi0 not configured
[ 1.0000040] CPU3 (ACPI0007) at acpi0 not configured
[ 1.0000040] THRM (PNP0C02) at acpi0 not configured
[ 1.0000040] acpitz0 at acpi0 (TCPU): cpu0 cpu1 cpu2 cpu3
[ 1.0000040] acpitz1 at acpi0 (TGPU)
[ 1.0000040] com0 at acpi0 (COM0, HISI0031-0): mem 0xfe660000-0xfe660fff irq 150
[ 1.0000040] com: DesignWare APB UART, 64-byte FIFO
[ 1.0000040] com0: console
[ 1.0000040] ohci0 at acpi0 (OHC0, PRP0001-0): mem 0xfd840000-0xfd87ffff irq 163
[ 1.0000040] ohci0: OHCI version 1.0
[ 1.0000040] usb0 at ohci0: USB revision 1.0
[ 1.0000040] ehci0 at acpi0 (EHC0, PNP0D20-0): mem 0xfd800000-0xfd83ffff irq 162
[ 1.0000040] ehci0: 1 companion controller, 1 port
[ 1.0000040] ehci0: Using DMA subregion for control data structures
[ 1.0000040] usb1 at ehci0: USB revision 2.0
[ 1.0000040] ohci1 at acpi0 (OHC1, PRP0001-1): mem 0xfd8c0000-0xfd8fffff irq 166
[ 1.0000040] ohci1: OHCI version 1.0
[ 1.0000040] usb2 at ohci1: USB revision 1.0
[ 1.0000040] ehci1 at acpi0 (EHC1, PNP0D20-1): mem 0xfd880000-0xfd8bffff irq 165
[ 1.0000040] ehci1: 1 companion controller, 1 port
[ 1.0000040] ehci1: Using DMA subregion for control data structures
[ 1.0000040] usb3 at ehci1: USB revision 2.0
[ 1.0000040] xhci0 at acpi0 (XHC0, PNP0D10-0): mem 0xfcc00000-0xfcffffff irq 201
[ 1.0000040] usb4 at xhci0: USB revision 3.0
[ 1.0000040] usb5 at xhci0: USB revision 2.0
[ 1.0000040] xhci1 at acpi0 (XHC1, PNP0D10-1): mem 0xfd000000-0xfd3fffff irq 202
[ 1.0000040] usb6 at xhci1: USB revision 3.0
[ 1.0000040] usb7 at xhci1: USB revision 2.0
[ 1.0000040] eqos0 at acpi0 (MAC0, PRP0001-2): mem 0xfe2a0000-0xfe2affff irq 59,56
[ 1.0000040] eqos0: DesignWare EQOS ver 0x51 (0x30)
[ 1.0000040] eqos0: Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000040] rgephy0 at eqos0 phy 0: RTL8211F 1000BASE-T media interface
[ 1.0000040] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
[ 1.0000040] rgephy1 at eqos0 phy 1: RTL8211F 1000BASE-T media interface
[ 1.0000040] rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
[ 1.0000040] dwcmmc0 at acpi0 (MSH0, PRP0001-4): mem 0xfe2b0000-0xfe2b3fff irq 130
[ 1.0000040] sdhc0 at acpi0 (EMMC, RKCP0D40-0): mem 0xfe310000-0xfe31ffff irq 51
[ 1.0000040] sdhc0: SDHC 4.2, rev 0, 32-bit ADMA2, 50000 kHz, HS 3.0V, re-tuning mode 1, 1024 byte blocks
[ 1.0000040] sdmmc0 at sdhc0 slot 0
[ 1.0000040] acpipchb0 at acpi0 (PCI0, PNP0A08): PCI Express Host Bridge
[ 1.0000040] pci0 at acpipchb0 bus 1
[ 1.0000040] rge0 at pci0 dev 0 function 0: vendor 10ec product 8125 (rev. 0x05)
[ 1.0000040] rge0: interrupting at irq 296 (MSI-X vec 0)
[ 1.0000040] rge0: Ethernet address [_MAC_XXXXXXXXXX]
[ 1.7930604] uhub0 at usb4: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[ 1.8030649] uhub1 at usb5: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[ 1.8030649] uhub2 at usb6: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[ 1.8130620] uhub3 at usb7: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[ 1.8230636] sdmmc1 at dwcmmc0
[ 1.8330625] uhub7 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.8452267] uhub5 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.8530659] cpu0: PMU interrupting on irq 260
[ 1.8530659] cpu1: PMU interrupting on irq 261
[ 1.8630657] cpu2: PMU interrupting on irq 262
[ 1.8630657] cpu3: PMU interrupting on irq 263
[ 1.8630657] uhub4 at usb2: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 1.8742149] uhub6 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 1.9835488] sdhc0: cmd timeout error
[ 1.9835488] sdmmc0: can't read EXT_CSD (error=60)
[ 1.9935486] sdmmc0: mem init failed
[ 1.9935486] sdmmc0: init failed
[ 2.0035492] sdmmc1: SD card status: 4-bit, C10, U3
[ 2.0035492] ld1 at sdmmc1: <0x02:0x544d:SA32G:0x25:0x2626324f:0x103>
[ 2.0135487] ld1: 29608 MB, 7519 cyl, 128 head, 63 sec, 512 bytes/sect x 60637184 sectors
[ 2.0237962] dk0 at ld1: "loader", 16320 blocks at 64, type: ext2fs
[ 2.0336326] dk1 at ld1: "uboot", 16384 blocks at 16384, type: ext2fs
[ 2.0336326] dk2 at ld1: "env", 32768 blocks at 32768, type: ext2fs
[ 2.0461119] dk3 at ld1: "uefiboot", 524288 blocks at 65536, type: msdos
[ 2.0461119] dk4 at ld1: "netbsd-root", 8388608 blocks at 589824, type: ffs
[ 2.0595446] dk5 at ld1: "netbsd-var", 8388608 blocks at 8978432, type: ffs
[ 2.0663915] dk6 at ld1: "netbsd-vol1", 8388608 blocks at 17367040, type: ffs
[ 2.0663915] ld1: 4-bit width, High-Speed/SDR25, 50.000 MHz
[ 2.3864026] swwdog0: software watchdog initialized
[ 2.4064042] WARNING: 3 errors while detecting hardware; check system log.
[ 2.4164040] boot device: dk4
[ 2.4264041] root on dk4
[ 2.4364045] root file system type: ffs
[ 2.4464051] kern.module.path=/stand/evbarm/10.99.2/modules
[ 2.4464051] WARNING: clock lost 14 days
[ 2.4464051] WARNING: using filesystem time
[ 2.4595960] WARNING: CHECK AND RESET THE DATE!
/etc/rc.conf is not configured. Multiuser boot aborted.
Enter pathname of shell or RETURN for /bin/sh:
We recommend that you create a non-root account and use su(1) for root access.
#