Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-01-16 05:58:48
From: cracauer
Description: FreeBSD-14-current - Quad Opteron 6174 in Supermicro H8QGI
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-CURRENT #1 main-n259941-95fa2e0aee5b: Thu Jan 5 12:18:06 EST 2023
cracauer@gonzo-tmp:/xcarb3/usr/obj/xcarb3/usr/src/amd64.amd64/sys/GENERIC-NODEBUG amd64
FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c)
VT(vga): resolution 640x480
module iwn already present!
CPU: AMD Opteron(tm) Processor 6174 (2200.05-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x100f91 Family=0x10 Model=0x9 Stepping=1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>
SVM: NP,NRIP,NAsids=64
TSC: P-state invariant
real memory = 165356240896 (157696 MB)
avail memory = 160993079296 (153534 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <102811 APIC1711>
FreeBSD/SMP: Multiprocessor System Detected: 48 CPUs
FreeBSD/SMP: Non-uniform topology
random: unblocking device.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20221020/tbfadt-748)
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 3 22 9 13 27 44 10 38 24 11 20 21 28 33 2 36 18 45 12 37 26 1 41 40 43 4 5 47 39 14 35 19 32 29 8 31 25 15 23 7 16 17 42 46 6 30 34
Cuse v0.1.37 @ /dev/cuse
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xfb9c0-0xfb9de
smbios0: Version: 2.6
aesni0: No AES or SHA support.
acpi0: <SMCI >
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
apei0: <ACPI Platform Error Interface> on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 54 at device 13.0 on pci0
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 82576> port 0xe400-0xe41f mem 0xdff60000-0xdff7ffff,0xdff40000-0xdff5ffff,0xdff1c000-0xdff1ffff irq 40 at device 0.0 on pci1
igb0: EEPROM V1.4-3
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 8 RX queues 8 TX queues
igb0: Using MSI-X interrupts with 9 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: netmap queues/slots: TX 8/1024, RX 8/1024
igb1: <Intel(R) PRO/1000 82576> port 0xe800-0xe81f mem 0xdffe0000-0xdfffffff,0xdffc0000-0xdffdffff,0xdff9c000-0xdff9ffff irq 41 at device 0.1 on pci1
igb1: EEPROM V1.4-3
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 8 RX queues 8 TX queues
igb1: Using MSI-X interrupts with 9 vectors
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: netmap queues/slots: TX 8/1024, RX 8/1024
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xd000-0xd007,0xc000-0xc003,0xb000-0xb007,0xa000-0xa003,0x9000-0x900f mem 0xdfefa400-0xdfefa7ff irq 22 at device 17.0 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfef6000-0xdfef6fff irq 16 at device 18.0 on pci0
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfef7000-0xdfef7fff irq 16 at device 18.1 on pci0
usbus1 on ohci1
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xdfefa800-0xdfefa8ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfef8000-0xdfef8fff irq 18 at device 19.0 on pci0
usbus3 on ohci2
usbus3: 12Mbps Full Speed USB v1.0
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfef9000-0xdfef9fff irq 18 at device 19.1 on pci0
usbus4 on ohci3
usbus4: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xdfefac00-0xdfefacff irq 19 at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
usbus5: 480Mbps High Speed USB v2.0
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> mem 0xdd000000-0xddffffff,0xdeffc000-0xdeffffff,0xdf000000-0xdf7fffff irq 20 at device 4.0 on pci2
vgapci0: Boot video device
ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdfefb000-0xdfefbfff irq 18 at device 20.5 on pci0
usbus6 on ohci4
usbus6: 12Mbps Full Speed USB v1.0
acpi_button0: <Power Button> on acpi0
ns8250: UART FCR is broken
ns8250: UART FCR is broken
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ns8250: UART FCR is broken
ns8250: UART FCR is broken
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 5 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounter "TSC-low" frequency 1099999686 Hz quality 800
Timecounters tick every 1.000 msec
Trying to mount root from ufs:/dev/label/xc3roota [rw]...
ugen6.1: <ATI OHCI root HUB> at usbus6
ugen1.1: <ATI OHCI root HUB> at usbus1
ugen3.1: <ATI OHCI root HUB> at usbus3
uhub0 on usbus1
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub1 on usbus6
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub2 on usbus3
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen0.1: <ATI OHCI root HUB> at usbus0
ugen4.1: <ATI OHCI root HUB> at usbus4
ugen2.1: <ATI EHCI root HUB> at usbus2
uhub3 on usbus0
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub4 on usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI EHCI root HUB> at usbus5
uhub5 on usbus2
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub6 on usbus5
uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub1: 2 ports with 2 removable, self powered
uhub3: 3 ports with 3 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
uhub4: 3 ports with 3 removable, self powered
ugen6.2: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus6
ukbd0 on uhub1
ukbd0: <Keyboard Interface> on usbus6
kbd2 at ukbd0
Root mount waiting for: CAM usbus2 usbus5
uhub5: 6 ports with 6 removable, self powered
uhub6: 6 ports with 6 removable, self powered
Root mount waiting for: CAM
ada0 at ahcich3 bus 0 scbus3 target 0 lun 0
ada0: <SAMSUNG SSD PM851 2.5 7mm 256GB EXT08D0Q> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
GEOM_PART: integrity check failed (label/xc3root, BSD)
ugen0.2: <Key Tronic Keytronic USB Keyboard> at usbus0
ukbd1 on uhub3
ukbd1: <icKeytronic USB Keyboard1234> on usbus0
kbd3 at ukbd1
intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
intsmb0: intr SMI enabled revision 0
intsmb0: using polling mode when configured interrupt is SMI
smbus0: <System Management Bus> on intsmb0
lo0: link state changed to UP
igb0: link state changed to UP
ums0 on uhub1
ums0: <Mouse Interface> on usbus6
Security policy loaded: MAC/ntpd (mac_ntpd)
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
[nl_mod] netlink_modevent: Loading
[nl_mod] netlink_modevent: netlink support is in BETA stage
[nl_mod] netlink_register_proto: Registered netlink NETLINK_GENERIC(16) handler
[nl_generic] genl_register_family: Registered family nlctrl id 16
[nl_generic] genl_register_cmds: Adding cmd GETFAMILY(3) to family nlctrl
[nl_route_core] rtnl_load: rtnl loading
[nl_mod] netlink_register_proto: Registered netlink NETLINK_ROUTE(0) handler
ugen0.2: <Key Tronic Keytronic USB Keyboard> at usbus0 (disconnected)
ukbd1: at uhub3, port 2, addr 2 (disconnected)
ukbd1: detached