Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-01-17 17:35:29
From: cracauer
Description: FreeBSD-14-current/amr64 in Parallels VM on m1 mac mini
---<<BOOT>>---
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
WARNING: Cannot find freebsd,dts-version property, cannot check DTB compliance
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-CURRENT #0 main-n260119-7f2109f240c2: Mon Jan 16 19:30:50 EST 2023
cracauer@mini102vm1:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC-NODEBUG arm64
FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c)
VT(efifb): resolution 1024x768
module scmi already present!
module firmware already present!
real memory = 4294901760 (4095 MB)
avail memory = 4154601472 (3962 MB)
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
Starting CPU 4 (4)
Starting CPU 5 (5)
Starting CPU 6 (6)
Starting CPU 7 (7)
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
random: unblocking device.
random: entropy device external interface
MAP 13c050000 mode 2 pages 192
MAP 13f600000 mode 2 pages 400
MAP 13f790000 mode 2 pages 592
MAP 1e00000 mode 0 pages 78
MAP 2120000 mode 0 pages 1
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
clk_fixed0: <Fixed clock> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
gic0: <ARM Generic Interrupt Controller v3.0> mem 0x2010000-0x201ffff,0x2500000-0x2cfffff on ofwbus0
gicv2m0: <ARM Generic Interrupt Controller MSI/MSIX> mem 0x2250000-0x2250fff on gic0
generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
cpu4: <Open Firmware CPU> on cpulist0
cpu5: <Open Firmware CPU> on cpulist0
cpu6: <Open Firmware CPU> on cpulist0
cpu7: <Open Firmware CPU> on cpulist0
ahci0: <AHCI SATA controller> mem 0x2140000-0x2141fff irq 4 on ofwbus0
ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
virtio_mmio0: <VirtIO MMIO adapter> mem 0x21a0000-0x21a3fff irq 5 on ofwbus0
pcib0: <Generic PCI host controller> mem 0x2300000-0x23fffff on ofwbus0
pci0: <OFW PCI bus> on pcib0
pci0: <multimedia, HDA> at device 1.0 (no driver attached)
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0x1400d000-0x1400d3ff at device 2.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0x1400c000-0x1400cfff at device 3.0 on pci0
xhci0: 32 bytes context size, 32-bit DMA
usbus1 on xhci0
virtio_pci0: <VirtIO PCI (legacy) Network adapter> mem 0x1400b000-0x1400bfff,0x1400a000-0x1400afff at device 5.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci0
vtnet0: Ethernet address: [_MAC_XXXXXXXXXX]
pci0: <unknown> at device 9.0 (no driver attached)
virtio_pci1: <VirtIO PCI (modern) GPU adapter> mem 0x10000000-0x13ffffff,0x14008000-0x14008fff,0x14000000-0x14003fff at device 10.0 on pci0
armv8crypto0: <AES-CBC,AES-XTS,AES-GCM>
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
usbus0: 480Mbps High Speed USB v2.0
usbus1: 5.0Gbps Super Speed USB v3.0
CPU 0: ARM Unknown CPU r0p0 (midr: 410f0000) affinity: 0
Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
Instruction Set Attributes 0 = <TLBI-OSR,CondM-8.5,FHM,DP,SHA3,RDM,Atomic,CRC32,SHA2+SHA512,SHA1,AES+PMULL>
Instruction Set Attributes 1 = <PredInv,SB,FRINTTS,GPI,RCPC-8.4,FCMA,JSCVT,API EPAC,DCCVADP>
Instruction Set Attributes 2 = <>
Processor Features 0 = <CSV3,CSV2,PSTATE.DIT,RAS,AdvSIMD+HP,FP+HP,EL1,EL0>
Processor Features 1 = <PSTATE.SSBS MSR>
Memory Model Features 0 = <ExS,TGran4,TGran16,8bit ASID,64GB PA>
Memory Model Features 1 = <XNX,SpecSEI,PAN+ATS1E1,LO,HPD+TTPBHA,8bit VMID>
Memory Model Features 2 = <E0PD,TTL,IDS,AT,32bit CCIDX,48bit VA,IESB,UAO,CnP>
Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,Debugv8>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
AArch32 Instruction Set Attributes 5 = <>
AArch32 Media and VFP Features 0 = <>
AArch32 Media and VFP Features 1 = <>
CPU 1: ARM Unknown CPU r0p0 (midr: 410f0000) affinity: 1
CPU 2: ARM Unknown CPU r0p0 (midr: 410f0000) affinity: 2
CPU 3: ARM Unknown CPU r0p0 (midr: 410f0000) affinity: 3
CPU 4: ARM Unknown CPU r0p0 (midr: 410f0000) affinity: 4
CPU 5: ARM Unknown CPU r0p0 (midr: 410f0000) affinity: 5
CPU 6: ARM Unknown CPU r0p0 (midr: 410f0000) affinity: 6
CPU 7: ARM Unknown CPU r0p0 (midr: 410f0000) affinity: 7
Release APs...done
Trying to mount root from zfs:zroot/ROOT/default []...
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <(0x1033) XHCI root HUB> at usbus1
uhub0 on usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1 on usbus1
uhub1: <(0x1033) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <freebsd-current-0 SSD F.3X95GM> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 65536MB (134217728 512 byte sectors)
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: < Virtual DVD-ROM R103> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBE] 31415B265
cd0: 150.000MB/s transfers (SATA 1.x, UDMA1, ATAPI 12bytes, PIO 8192bytes)
cd0: 794MB (406696 2048 byte sectors)
uhub1: 14 ports with 14 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen1.2: <Parallels Virtual Mouse> at usbus1
ugen1.3: <Parallels Virtual Keyboard> at usbus1
ukbd0 on uhub1
ukbd0: <Virtual Keyboard Interface> on usbus1
kbd1 at ukbd0
ukbd1 on uhub1
ukbd1: <Virtual Keyboard Interface> on usbus1
kbd2 at ukbd1
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub0: 15 ports with 15 removable, self powered
vtballoon0: <VirtIO Balloon Adapter> on virtio_mmio0
lo0: link state changed to UP
vtnet0: link state changed to UP
uhid0 on uhub1
uhid0: <Absolute Coordinate Interface> on usbus1
pid 415 (sh), jid 0, uid 0: exited on signal 11 (core dumped)
uhid1 on uhub1
uhid1: <Relative Coordinate Interface> on usbus1