Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2023-02-23 09:39:10
From: user9270
Description: FreeBSD/amd64 on Dell Inc. PowerEdge C6420
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.1-RELEASE-p1 GENERIC amd64
FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
VT(efifb): resolution 1280x1024
module_register: cannot register tmpfs from kernel; already loaded from tmpfs.ko
Module tmpfs failed to register: 17
CPU: Intel(R) Xeon(R) Gold 6226R CPU @ 2.90GHz (2900.00-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x50657  Family=0x6  Model=0x55  Stepping=7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0xd39ffffb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,MPX,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,AVX512BW,AVX512VL>
  Structured Extended Features2=0x808<PKU,AVX512VNNI>
  Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x2acab<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TSX_CTRL>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 412304277504 (393204 MB)
avail memory = 400161579008 (381623 MB)
CPU microcode: updated from 0x5003005 to 0x5003302
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   PE_SC3  >
FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs
FreeBSD/SMP: 2 package(s) x 16 core(s) x 2 hardware threads
FreeBSD/SMP Online: 2 package(s) x 16 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic6: MADT APIC ID 16 != hw id 0
ioapic7: MADT APIC ID 17 != hw id 1
ioapic8: MADT APIC ID 18 != hw id 2
ioapic0 <Version 2.0> irqs 0-23
ioapic1 <Version 2.0> irqs 24-31
ioapic2 <Version 2.0> irqs 32-39
ioapic3 <Version 2.0> irqs 40-47
ioapic4 <Version 2.0> irqs 48-55
ioapic5 <Version 2.0> irqs 72-79
ioapic6 <Version 2.0> irqs 80-87
ioapic7 <Version 2.0> irqs 88-95
ioapic8 <Version 2.0> irqs 96-103
Launching APs: 6 4 5 16 10 11 12 17 20 3 24 19 18 23 15 31 22 8 28 2 26 21 9 29 13 1 30 7 14 25 27
random: entropy device external interface
kbd0 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x68e5b000-0x68e5b01e
smbios0: Version: 3.2, BCD Revision: 3.2
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <DELL PE_SC3>
acpi0: Power Button (fixed)
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 350
Event timer "HPET1" frequency 24000000 Hz quality 340
Event timer "HPET2" frequency 24000000 Hz quality 340
Event timer "HPET3" frequency 24000000 Hz quality 340
Event timer "HPET4" frequency 24000000 Hz quality 340
Event timer "HPET5" frequency 24000000 Hz quality 340
Event timer "HPET6" frequency 24000000 Hz quality 340
Event timer "HPET7" frequency 24000000 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
apei0: <ACPI Platform Error Interface> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
ioat0: <SKX IOAT> mem 0x9312c000-0x9312ffff at device 4.0 numa-domain 0 on pci0
ioat0: Capabilities: f0006f1<DMA_with_DIF,PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat1: <SKX IOAT> mem 0x93128000-0x9312bfff at device 4.1 numa-domain 0 on pci0
ioat1: Capabilities: f0006f1<DMA_with_DIF,PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat2: <SKX IOAT> mem 0x93124000-0x93127fff at device 4.2 numa-domain 0 on pci0
ioat2: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat3: <SKX IOAT> mem 0x93120000-0x93123fff at device 4.3 numa-domain 0 on pci0
ioat3: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat4: <SKX IOAT> mem 0x9311c000-0x9311ffff at device 4.4 numa-domain 0 on pci0
ioat4: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat5: <SKX IOAT> mem 0x93118000-0x9311bfff at device 4.5 numa-domain 0 on pci0
ioat5: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat6: <SKX IOAT> mem 0x93114000-0x93117fff at device 4.6 numa-domain 0 on pci0
ioat6: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat7: <SKX IOAT> mem 0x93110000-0x93113fff at device 4.7 numa-domain 0 on pci0
ioat7: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
pci0: <dasp, performance counters> at device 8.1 (no driver attached)
pci0: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Lewisburg AHCI SATA controller> port 0x2068-0x206f,0x2074-0x2077,0x2040-0x205f mem 0x93136000-0x93137fff,0x9313f000-0x9313f0ff,0x93080000-0x930fffff at device 17.5 numa-domain 0 on pci0
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
xhci0: <Intel Lewisburg USB 3.0 controller> mem 0x93100000-0x9310ffff at device 20.0 numa-domain 0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
pci0: <simple comms> at device 22.4 (no driver attached)
ahci1: <Intel Lewisburg AHCI SATA controller> port 0x2060-0x2067,0x2070-0x2073,0x2020-0x203f mem 0x93134000-0x93135fff,0x9313e000-0x9313e0ff,0x93000000-0x9307ffff at device 23.0 numa-domain 0 on pci0
ahci1: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
ahcich6: <AHCI channel> at channel 0 on ahci1
ahcich7: <AHCI channel> at channel 1 on ahci1
ahcich8: <AHCI channel> at channel 2 on ahci1
ahcich9: <AHCI channel> at channel 3 on ahci1
ahcich10: <AHCI channel> at channel 4 on ahci1
ahcich11: <AHCI channel> at channel 5 on ahci1
ahcich12: <AHCI channel> at channel 6 on ahci1
ahcich13: <AHCI channel> at channel 7 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
pcib1: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci2
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92808000-0x9280bfff,0x92000000-0x927fffff at device 0.0 numa-domain 0 on pci3
vgapci0: Boot video device
pcib4: <ACPI PCI-PCI bridge> at device 28.5 numa-domain 0 on pci0
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
pci0: <memory> at device 31.2 (no driver attached)
pci0: <serial bus> at device 31.5 (no driver attached)
pcib5: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci5
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci5
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci5
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
ixl0: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.1-k> mem 0x9f000000-0x9fffffff,0xa0008000-0xa000ffff at device 0.0 numa-domain 0 on pci8
ixl0: fw 8.815.63341 api 1.12 nvm 8.15 etid 800096cb oem 20.5120.17
ixl0: PF-ID[0]: VFs 64, MSI-X 129, VF MSI-X 5, QPs 768, I2C
ixl0: Using 1024 TX descriptors and 1024 RX descriptors
ixl0: Using 8 RX queues 8 TX queues
ixl0: Using MSI-X interrupts with 9 vectors
ixl0: Ethernet address: [_MAC_XXXXXXXXXX]
ixl0: Allocating 8 queues for PF LAN VSI; 8 queues active
ixl0: PCI Express Bus: Speed 8.0GT/s Width x8
ixl0: Failed to initialize SR-IOV (error=2)
ixl0: netmap queues/slots: TX 8/1024, RX 8/1024
ixl1: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.1-k> mem 0x9e000000-0x9effffff,0xa0000000-0xa0007fff at device 0.1 numa-domain 0 on pci8
ixl1: fw 8.815.63341 api 1.12 nvm 8.15 etid 800096cb oem 20.5120.17
ixl1: PF-ID[1]: VFs 64, MSI-X 129, VF MSI-X 5, QPs 768, I2C
ixl1: Using 1024 TX descriptors and 1024 RX descriptors
ixl1: Using 8 RX queues 8 TX queues
ixl1: Using MSI-X interrupts with 9 vectors
ixl1: Ethernet address: [_MAC_XXXXXXXXXX]
ixl1: Allocating 8 queues for PF LAN VSI; 8 queues active
ixl1: PCI Express Bus: Speed 8.0GT/s Width x8
ixl1: Failed to initialize SR-IOV (error=2)
ixl1: netmap queues/slots: TX 8/1024, RX 8/1024
pcib9: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci5
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
pcib10: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci10: <ACPI PCI bus> numa-domain 0 on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10
pci11: <ACPI PCI bus> numa-domain 0 on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci10
pci12: <ACPI PCI bus> numa-domain 0 on pcib12
pcib13: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci10
pci13: <ACPI PCI bus> numa-domain 0 on pcib13
pcib14: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci10
pci14: <ACPI PCI bus> numa-domain 0 on pcib14
pcib15: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci15: <ACPI PCI bus> numa-domain 1 on pcib15
pcib16: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 1 on pci15
pci16: <ACPI PCI bus> numa-domain 1 on pcib16
pcib17: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 1 on pci15
pci17: <ACPI PCI bus> numa-domain 1 on pcib17
pcib18: <ACPI PCI-PCI bridge>
ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None
ixl0: link state changed to UP
 at device 2.0 numa-domain 1 on pci15
pci18: <ACPI PCI bus> numa-domain 1 on pcib18
debugnet_any_ifnet_update: Bad dn_init result from ixl0 (ifp 0xfffff80103560800), ignoring.
pcib19: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 1 on pci15
pci19: <ACPI PCI bus> numa-domain 1 on pcib19
pci15: <dasp, performance counters> at device 14.0 (no driver attached)
ixl1: link state changed to UP
ixl1: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None
debugnet_any_ifnet_update: Bad dn_init result from ixl1 (ifp 0xfffff8010325c800), ignoring.
pci15: <dasp, performance counters> at device 15.0 (no driver attached)
pci15: <dasp, performance counters> at device 16.0 (no driver attached)
pci15: <dasp, performance counters> at device 18.0 (no driver attached)
pci15: <dasp, performance counters> at device 18.1 (no driver attached)
pci15: <dasp, performance counters> at device 18.4 (no driver attached)
pci15: <dasp, performance counters> at device 18.5 (no driver attached)
pci15: <dasp, performance counters> at device 21.1 (no driver attached)
pci15: <dasp, performance counters> at device 22.1 (no driver attached)
pci15: <dasp, performance counters> at device 22.5 (no driver attached)
pci15: <dasp, performance counters> at device 23.1 (no driver attached)
pcib20: <ACPI Host-PCI bridge> numa-domain 2 on acpi0
pci20: <ACPI PCI bus> numa-domain 2 on pcib20
ioat8: <SKX IOAT> mem 0xc601c000-0xc601ffff at device 4.0 numa-domain 2 on pci20
ioat8: Capabilities: f0006f1<DMA_with_DIF,PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat9: <SKX IOAT> mem 0xc6018000-0xc601bfff at device 4.1 numa-domain 2 on pci20
ioat9: Capabilities: f0006f1<DMA_with_DIF,PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat10: <SKX IOAT> mem 0xc6014000-0xc6017fff at device 4.2 numa-domain 2 on pci20
ioat10: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat11: <SKX IOAT> mem 0xc6010000-0xc6013fff at device 4.3 numa-domain 2 on pci20
ioat11: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat12: <SKX IOAT> mem 0xc600c000-0xc600ffff at device 4.4 numa-domain 2 on pci20
ioat12: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat13: <SKX IOAT> mem 0xc6008000-0xc600bfff at device 4.5 numa-domain 2 on pci20
ioat13: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat14: <SKX IOAT> mem 0xc6004000-0xc6007fff at device 4.6 numa-domain 2 on pci20
ioat14: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat15: <SKX IOAT> mem 0xc6000000-0xc6003fff at device 4.7 numa-domain 2 on pci20
ioat15: Capabilities: f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
pci20: <dasp, performance counters> at device 8.1 (no driver attached)
pcib21: <ACPI Host-PCI bridge> numa-domain 2 on acpi0
pci21: <ACPI PCI bus> numa-domain 2 on pcib21
pcib22: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 2 on pci21
pci22: <ACPI PCI bus> numa-domain 2 on pcib22
pcib23: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 2 on pci21
pci23: <ACPI PCI bus> numa-domain 2 on pcib23
pcib24: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 2 on pci21
pci24: <ACPI PCI bus> numa-domain 2 on pcib24
pcib25: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 2 on pci21
pci25: <ACPI PCI bus> numa-domain 2 on pcib25
pcib26: <ACPI Host-PCI bridge> numa-domain 2 on acpi0
pci26: <ACPI PCI bus> numa-domain 2 on pcib26
pcib27: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 2 on pci26
pci27: <ACPI PCI bus> numa-domain 2 on pcib27
pcib28: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 2 on pci26
pci28: <ACPI PCI bus> numa-domain 2 on pcib28
pcib29: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 2 on pci26
pci29: <ACPI PCI bus> numa-domain 2 on pcib29
pcib30: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 2 on pci26
pci30: <ACPI PCI bus> numa-domain 2 on pcib30
pcib31: <ACPI Host-PCI bridge> numa-domain 3 on acpi0
pci31: <ACPI PCI bus> numa-domain 3 on pcib31
pcib32: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 3 on pci31
pcib33: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 3 on pci31
pcib34: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 3 on pci31
pci32: <ACPI PCI bus> numa-domain 3 on pcib34
pcib35: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 3 on pci31
pci33: <ACPI PCI bus> numa-domain 3 on pcib35
pci31: <dasp, performance counters> at device 14.0 (no driver attached)
pci31: <dasp, performance counters> at device 15.0 (no driver attached)
pci31: <dasp, performance counters> at device 16.0 (no driver attached)
pci31: <dasp, performance counters> at device 18.0 (no driver attached)
pci31: <dasp, performance counters> at device 18.1 (no driver attached)
pci31: <dasp, performance counters> at device 18.4 (no driver attached)
pci31: <dasp, performance counters> at device 18.5 (no driver attached)
pci31: <dasp, performance counters> at device 21.1 (no driver attached)
pci31: <dasp, performance counters> at device 22.1 (no driver attached)
pci31: <dasp, performance counters> at device 22.5 (no driver attached)
pci31: <dasp, performance counters> at device 23.1 (no driver attached)
cpu0: <ACPI CPU> numa-domain 0 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
ipmi0: <IPMI System Interface> port 0xca8,0xcac irq 10 on acpi0
ipmi0: KCS mode found at io 0xca8 on acpi
orm0: <ISA Option ROM> at iomem 0xed800-0xf17ff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff pnpid PNP0900 on isa0
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> numa-domain 0 on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est5 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est6 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est7 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est8 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est9 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est10 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est11 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est12 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est13 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est14 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est15 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est16 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est17 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est18 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est19 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est20 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est21 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est22 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est23 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est24 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est25 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est26 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est27 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est28 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est29 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est30 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 207400002400
device_attach: est31 attach returned 6
module_register_init: MOD_LOAD (tmpfs, 0xffffffff80ce7f40, 0xffffffff818f4630) error 17
Timecounter "TSC-low" frequency 1446601043 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ipmi0: IPMI device rev. 1, firmware rev. 4.40, version 2.0, device support mask 0xdf
ipmi0: Number of channels 6
ipmi0: Attached watchdog
ipmi0: Establishing power cycle handler
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses1 at ahciem1 bus 0 scbus15 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
ada0 at ahcich2 bus 0 scbus2 target 0 lun 0
ada0: <MTFDDAK480TDN D1DF004> ACS-3 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 457862MB (937703088 512 byte sectors)
ada1 at ahcich3 bus 0 scbus3 target 0 lun 0
ada1: <MTFDDAK480TDN D1DF004> ACS-3 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 457862MB (937703088 512 byte sectors)
ses0: pass0,ada0 in 'Slot 02', SATA Slot: scbus2 target 0
ada2 at ahcich4 bus 0 scbus4 target 0 lun 0
ada2: <MTFDDAK480TDN D1DF004> ACS-3 ATA SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXX]
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 457862MB (937703088 512 byte sectors)
ada3 at ahcich5 bus 0 scbus5 target 0 lun 0
ada3: <MTFDDAK480TDN D1DF004> ACS-3 ATA SATA 3.x device
ada3: [_SERIAL_NUMBER_XXXXXXXXX]
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 457862MB (937703088 512 byte sectors)
ses0: pass1,ada1 in 'Slot 03', SATA Slot: scbus3 target 0
ses0: pass2,ada2 in 'Slot 04', SATA Slot: scbus4 target 0
ses0: pass3,ada3 in 'Slot 05', SATA Slot: scbus5 target 0
sysctl_unregister_oid: failed(22) to unregister sysctl(tmpfs)
Trying to mount root from zfs:sys/ROOT/default []...
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub0 numa-domain 0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Dual Console: Video Primary, Serial Secondary
GEOM_ELI: Device gpt/swap0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: accelerated software
CPU: Intel(R) Xeon(R) Gold 6226R CPU @ 2.90GHz (2893.20-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x50657  Family=0x6  Model=0x55  Stepping=7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0xd39ffffb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,MPX,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,AVX512BW,AVX512VL>
  Structured Extended Features2=0x818<PKU,OSPKE,AVX512VNNI>
  Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x2acab<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TSX_CTRL>uhub0: 26 ports with 26 removable, self powered

  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
ugen0.2: <vendor 0x1604 product 0x10c0> at usbus0
uhub1 numa-domain 0 on uhub0
uhub1: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 1> on usbus0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
pchtherm0: <Lewisburg Thermal Subsystem> mem 0x9313c000-0x9313cfff at device 20.2 numa-domain 0 on pci0
ichsmb0: <Intel Lewisburg SMBus controller> port 0x2000-0x201f mem 0x93138000-0x931380ff at device 31.4 numa-domain 0 on pci0
smbus0: <System Management Bus> numa-domain 0 on ichsmb0
lo0: link state changed to UP
ixl0: link state changed to DOWN
ixl1: link state changed to DOWN
ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None
ixl0: link state changed to UP
ixl1: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None
ixl1: link state changed to UP
uhub1: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x1604 product 0x10c0> at usbus0
uhub2 numa-domain 0 on uhub1
uhub2: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 2> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.4: <vendor 0x1604 product 0x10c0> at usbus0
uhub3 numa-domain 0 on uhub1
uhub3: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 3> on usbus0
lagg0: link state changed to UP
uhub3: 4 ports with 4 removable, self powered
ixl0: promiscuous mode enabled
ixl1: promiscuous mode enabled
lagg0: promiscuous mode enabled