Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-02-23 13:27:21
From: root
Description: FreeBSD/amd64 on OEM OEM
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.1-RELEASE-p3 GENERIC amd64 FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) VT(vga): resolution 640x480 CPU: Intel(R) Atom(TM) CPU D525 @ 1.80GHz (1795.56-MHz K8-class CPU) Origin="GenuineIntel" Id=0x106ca Family=0x6 Model=0x1c Stepping=10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 4095131648 (3905 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <IntelR AWRDACPI> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: unblocking device. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20201113/tbfadt-748) Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20201113/tbfadt-748) Firmware Warning (ACPI): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20201113/tbfadt-748) Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20201113/tbfadt-748) Firmware Warning (ACPI): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20201113/tbfadt-850) Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20201113/tbfadt-850) Firmware Warning (ACPI): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20201113/tbfadt-850) ioapic0: MADT APIC ID 4 != hw id 0 ioapic0 <Version 2.0> irqs 0-23 Launching APs: 2 1 3 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf0be0-0xf0bfe smbios0: Version: 2.5, BCD Revision: 2.5 aesni0: No AES or SHA support. acpi0: <IntelR AWRDACPI> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 device_attach: hpet0 attach returned 12 atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xff00-0xff07 mem 0xfde80000-0xfdefffff,0xd0000000-0xdfffffff,0xfd700000-0xfd7fffff irq 16 at device 2.0 on pci0 agp0: <Intel Pineview SVGA controller> on vgapci0 WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 14.0. agp0: aperture size is 256M, detected 8188k stolen memory vgapci0: Boot video device vgapci1: <VGA-compatible display> mem 0xfdf00000-0xfdf7ffff at device 2.1 on pci0 uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0xfe00-0xfe1f irq 16 at device 26.0 on pci0 uhci0: LegSup = 0x2f00 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0xfd00-0xfd1f irq 21 at device 26.1 on pci0 uhci1: LegSup = 0x2f00 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfdfff000-0xfdfff3ff irq 18 at device 26.7 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci0 usbus2: 480Mbps High Speed USB v2.0 hdac0: <Intel 82801H HDA Controller> mem 0xfdff8000-0xfdffbfff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xbe00-0xbeff mem 0xfd3ff000-0xfd3fffff,0xfd3f8000-0xfd3fbfff irq 16 at device 0.0 on pci1 re0: Using 1 MSI-X message re0: Chip rev. 0x28000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci2: <ACPI PCI bus> on pcib2 re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xae00-0xaeff mem 0xfdcff000-0xfdcfffff,0xfdcf8000-0xfdcfbfff irq 17 at device 0.0 on pci2 re1: Using 1 MSI-X message re1: Chip rev. 0x28000000 re1: MAC rev. 0x00100000 miibus1: <MII bus> on re1 rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re1: Using defaults for TSO: 65518/35/2048 re1: Ethernet address: [_MAC_XXXXXXXXXX] re1: netmap queues/slots: TX 1/256, RX 1/256 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci3: <ACPI PCI bus> on pcib3 re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xee00-0xeeff mem 0xfdaff000-0xfdafffff,0xfdaf8000-0xfdafbfff irq 18 at device 0.0 on pci3 re2: Using 1 MSI-X message re2: Chip rev. 0x28000000 re2: MAC rev. 0x00100000 miibus2: <MII bus> on re2 rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2 rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re2: Using defaults for TSO: 65518/35/2048 re2: Ethernet address: [_MAC_XXXXXXXXXX] re2: netmap queues/slots: TX 1/256, RX 1/256 pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci4: <ACPI PCI bus> on pcib4 re3: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xce00-0xceff mem 0xfd8ff000-0xfd8fffff,0xfd8f8000-0xfd8fbfff irq 19 at device 0.0 on pci4 re3: Using 1 MSI-X message re3: Chip rev. 0x28000000 re3: MAC rev. 0x00100000 miibus3: <MII bus> on re3 rgephy3: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus3 rgephy3: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re3: Using defaults for TSO: 65518/35/2048 re3: Ethernet address: [_MAC_XXXXXXXXXX] re3: netmap queues/slots: TX 1/256, RX 1/256 uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0xfc00-0xfc1f irq 23 at device 29.0 on pci0 usbus3 on uhci2 usbus3: 12Mbps Full Speed USB v1.0 uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0xfb00-0xfb1f irq 19 at device 29.1 on pci0 usbus4 on uhci3 usbus4: 12Mbps Full Speed USB v1.0 uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0xfa00-0xfa1f irq 18 at device 29.2 on pci0 usbus5 on uhci4 usbus5: 12Mbps Full Speed USB v1.0 ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfdffe000-0xfdffe3ff irq 23 at device 29.7 on pci0 usbus6: EHCI version 1.0 usbus6 on ehci1 usbus6: 480Mbps High Speed USB v2.0 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 atapci1: <Intel ICH8M SATA300 controller> port 0xf800-0xf807,0xf700-0xf703,0xf600-0xf607,0xf500-0xf503,0xf400-0xf40f,0xf300-0xf30f irq 19 at device 31.2 on pci0 ata2: <ATA channel> at channel 0 on atapci1 ata3: <ATA channel> at channel 1 on atapci1 acpi_tz0: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. Timecounter "TSC" frequency 1795499804 Hz quality 1000 Timecounters tick every 1.000 msec ugen2.1: <Intel EHCI root HUB> at usbus2 ugen5.1: <Intel UHCI root HUB> at usbus5 ugen6.1: <Intel EHCI root HUB> at usbus6 ugen1.1: <Intel UHCI root HUB> at usbus1 uhub0 on usbus2 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub1 on usbus5 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 uhub2 on usbus6 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 ugen4.1: <Intel UHCI root HUB> at usbus4 ugen0.1: <Intel UHCI root HUB> at usbus0 ugen3.1: <Intel UHCI root HUB> at usbus3 uhub3 on usbus4 uhub4 on usbus0 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 uhub5 on usbus3 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 uhub6 on usbus1 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 Trying to mount root from ufs:/dev/ada0a [rw]... uhub1: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered Root mount waiting for: usbus2 usbus6 CAM uhub0: 4 ports with 4 removable, self powered ada0 at ata2 bus 0 scbus1 target 0 lun 0 ada0: <Corsair Force 3 SSD 1.3.3> ATA8-ACS SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: 57241MB (117231408 512 byte sectors) ada0: quirks=0x1<4K> ugen2.2: <HUAWEI Incorporated Huawei EM680 w/Gobi Technology> at usbus2 Root mount waiting for: usbus6 uhub2: 6 ports with 6 removable, self powered ichsmb0: <Intel 82801H (ICH8) SMBus controller> port 0x500-0x51f mem 0xfdffd000-0xfdffd0ff irq 19 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 lo0: link state changed to UP re0: link state changed to DOWN ugen3.2: <Dell Dell USB Keyboard> at usbus3 ukbd0 on uhub5 ukbd0: <EP1 Interrupt> on usbus3 re1: link state changed to DOWN kbd2 at ukbd0 re1.7: changing name to 'vdsl' re2: link state changed to DOWN re0: link state changed to UP vlan116: link state changed to UP vlan115: link state changed to UP vlan7: link state changed to UP re3: link state changed to DOWN pflog0: promiscuous mode enabled re1: link state changed to UP vdsl: link state changed to UP WARNING: attempt to domain_add(netgraph) after domainfinalize()