Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-02-24 11:41:15
From: root
Description: FreeBSD/amd64 on Supermicro C2SBC-Q
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.1-RELEASE-p6 GENERIC amd64 FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) VT(vbefb): resolution 1920x1080 CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (2394.05-MHz K8-class CPU) Origin="GenuineIntel" Id=0x6fb Family=0x6 Model=0xf Stepping=11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> VT-x: HLT,PAUSE TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8220938240 (7840 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 Launching APs: 3 2 1 random: entropy device external interface kbd1 at kbdmux0 nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 510.60.02 Wed Mar 16 11:03:12 UTC 2022 smbios0: <System Management BIOS> at iomem 0xf6760-0xf677e smbios0: Version: 2.33 aesni0: No AES or SHA support. acpi0: <PTLTD XSDT> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20201113/dsfield-352) ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639) ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689) pcib0: _OSC failed: AE_ALREADY_EXISTS pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xd2000000-0xd2ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci1 nvidia0: <NVIDIA GeForce GT 1030> on vgapci0 vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io vgapci0: Boot video device hdac0: <NVIDIA (0x0fb8) HDA Controller> mem 0xd3000000-0xd3003fff irq 17 at device 0.1 on pci1 em0: <Intel(R) 82566DM-2 ICH9 AMT> port 0x1820-0x183f mem 0xd3400000-0xd341ffff,0xd3424000-0xd3424fff irq 16 at device 25.0 on pci0 em0: EEPROM V1.1-0 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: **:**:**:**:**:** em0: netmap queues/slots: TX 1/1024, RX 1/1024 uhci0: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 16 at device 26.0 on pci0 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 17 at device 26.1 on pci0 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 uhci2: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 18 at device 26.2 on pci0 usbus2 on uhci2 usbus2: 12Mbps Full Speed USB v1.0 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd3425000-0xd34253ff irq 18 at device 26.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 usbus3: 480Mbps High Speed USB v2.0 hdac1: <Intel 82801I HDA Controller> mem 0xd3420000-0xd3423fff irq 16 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20201113/dsfield-352) ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639) ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689) pcib0: _OSC failed: AE_ALREADY_EXISTS pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20201113/dsfield-352) ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639) ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689) pcib0: _OSC failed: AE_ALREADY_EXISTS pci3: <ACPI PCI bus> on pcib3 em1: <Intel(R) PRO/1000 82573L> port 0x3000-0x301f mem 0xd3100000-0xd311ffff irq 16 at device 0.0 on pci3 em1: EEPROM V0.5-7 em1: Using 1024 TX descriptors and 1024 RX descriptors em1: Using an MSI interrupt em1: Ethernet address: **:**:**:**:**:** em1: netmap queues/slots: TX 1/1024, RX 1/1024 uhci3: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 23 at device 29.0 on pci0 usbus4 on uhci3 usbus4: 12Mbps Full Speed USB v1.0 uhci4: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 22 at device 29.1 on pci0 usbus5 on uhci4 usbus5: 12Mbps Full Speed USB v1.0 uhci5: <Intel 82801I (ICH9) USB controller> port 0x18e0-0x18ff irq 18 at device 29.2 on pci0 usbus6 on uhci5 usbus6: 12Mbps Full Speed USB v1.0 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd3426000-0xd34263ff irq 23 at device 29.7 on pci0 usbus7: EHCI version 1.0 usbus7 on ehci1 usbus7: 480Mbps High Speed USB v2.0 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib4 atapci0: <ITE IT8213F UDMA133 controller> port 0x4020-0x4027,0x4014-0x4017,0x4018-0x401f,0x4010-0x4013,0x4000-0x400f irq 23 at device 4.0 on pci4 ata2: <ATA channel> at channel 0 on atapci0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel ICH9 AHCI SATA controller> port 0x1c70-0x1c77,0x1c64-0x1c67,0x1c68-0x1c6f,0x1c60-0x1c63,0x1c00-0x1c1f mem 0xd3427000-0xd34277ff irq 17 at device 31.2 on pci0 ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 acpi_syscontainer0: <System Container> on acpi0 acpi_syscontainer1: <System Container> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC-low" frequency 1196999670 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen7.1: <Intel EHCI root HUB> at usbus7 ugen2.1: <Intel UHCI root HUB> at usbus2 ugen0.1: <Intel UHCI root HUB> at usbus0 ugen6.1: <Intel UHCI root HUB> at usbus6 uhub0 on usbus7 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 uhub1 on usbus6 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen1.1: <Intel UHCI root HUB> at usbus1 uhub2 on usbus0 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub3 on usbus1 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 hdacc0: <NVIDIA (0x0081) HDA CODEC> at cad 0 on hdac0 hdaa0: <NVIDIA (0x0081) Audio Function Group> at nid 1 on hdacc0 pcm0: <NVIDIA (0x0081) (HDMI/DP 8ch)> at nid 4 on hdaa0 pcm1: <NVIDIA (0x0081) (HDMI/DP 8ch)> at nid 5 on hdaa0 hdacc1: <Realtek ALC888 HDA CODEC> at cad 2 on hdac1 hdaa1: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc1 pcm2: <Realtek ALC888 (Analog 4ch/2.0)> at nid 20,27 and 24,26,25 on hdaa1 ugen5.1: <Intel UHCI root HUB> at usbus5 ugen3.1: <Intel EHCI root HUB> at usbus3 uhub4 on usbus5 uhub5 on usbus3 uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 uhub6 on usbus2 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen4.1: <Intel UHCI root HUB> at usbus4 uhub7 on usbus4 uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 Trying to mount root from zfs:system/ROOT/default []... uhub3: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub7: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: <Hitachi HTS721060G9SA00 MC3OC10H> ATA-7 SATA 1.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXX] ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: Command Queueing enabled ada0: 57231MB (117210240 512 byte sectors) ada1 at ahcich1 bus 0 scbus2 target 0 lun 0 ada1: <TOSHIBA MQ01ACF050 AV007D> ATA8-ACS SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXX] ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada1: Command Queueing enabled ada1: 476940MB (976773168 512 byte sectors) ada2 at ahcich2 bus 0 scbus3 target 0 lun 0 ada2: <SanDisk SSD PLUS 480 GB UG3000RL> ACS-2 ATA SATA 3.x device ada2: [_SERIAL_NUMBER_XXXXXXXXX] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) ada2: Command Queueing enabled ada2: 457872MB (937721856 512 byte sectors) ada3 at ahcich3 bus 0 scbus4 target 0 lun 0 ada3: <SanDisk SSD PLUS 240GB UF4500RL> ACS-2 ATA SATA 3.x device ada3: [_SERIAL_NUMBER_XXXXXXXXX] ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) ada3: Command Queueing enabled ada3: 228944MB (468877312 512 byte sectors) ses0 at ahciem0 bus 0 scbus7 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus1 target 0 ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus2 target 0 ses0: ada2,pass2 in 'Slot 02', SATA Slot: scbus3 target 0 ses0: ada3,pass3 in 'Slot 03', SATA Slot: scbus4 target 0 ses0: pass4,cd0 in 'Slot 05', SATA Slot: scbus6 target 0 uhub0: 6 ports with 6 removable, self powered uhub5: 6 ports with 6 removable, self powered ugen7.2: <vendor 0x1a40 USB 2.0 Hub> at usbus7 uhub8 on uhub0 uhub8: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 2> on usbus7 uhub8: 4 ports with 4 removable, self powered ugen7.3: <BY Tech Usb Gaming Keyboard> at usbus7 ukbd0 on uhub8 ukbd0: <BY Tech Usb Gaming Keyboard, class 0/0, rev 2.00/0.02, addr 3> on usbus7 kbd2 at ukbd0 ugen7.4: <PixArt Microsoft USB Optical Mouse> at usbus7 cd0 at ahcich5 bus 0 scbus6 target 0 lun 0 cd0: <HL-DT-ST BDDVDRW GBC-H20L 1.B8> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x1100-0x111f mem 0xd3428000-0xd34280ff irq 17 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 lo0: link state changed to UP em1: link state changed to UP uhid0 on uhub8 uhid0: <BY Tech Usb Gaming Keyboard, class 0/0, rev 2.00/0.02, addr 3> on usbus7 ums0 on uhub8 ums0: <PixArt Microsoft USB Optical Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus7 ums0: 3 buttons and [XYZ] coordinates ID=0