Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-04-01 19:44:36
From: ahze
Description: FreeBSD/amd64 on
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.1-RELEASE-p6 GENERIC amd64 FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz (2095.28-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x21c27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 15459831808 (14743 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <INTEL NUC5i3MY> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS. ioapic0 <Version 2.0> irqs 0-39 Launching APs: 1 2 3 random: entropy device external interface kbd1 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0x36ee7d18-0x36ee7d36 smbios0: Version: 2.8, BCD Revision: 2.8 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <INTEL> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x79000000-0x79ffffff,0x80000000-0xbfffffff at device 2.0 on pci0 vgapci0: Boot video device hdac0: <Intel Broadwell HDA Controller> mem 0x7a134000-0x7a137fff at device 3.0 on pci0 xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0x7a120000-0x7a12ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) em0: <Intel(R) I218-V (3)> port 0x3080-0x309f mem 0x7a100000-0x7a11ffff,0x7a13b000-0x7a13bfff at device 25.0 on pci0 em0: EEPROM V0.2-4 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 hdac1: <Intel Broadwell HDA Controller> mem 0x7a130000-0x7a133fff at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <network> at device 0.0 (no driver attached) ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0x7a13a000-0x7a13a3ff at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0x30d0-0x30d7,0x30c0-0x30c3,0x30b0-0x30b7,0x30a0-0x30a3,0x3060-0x307f mem 0x7a139000-0x7a1397ff at device 31.2 on pci0 ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC" frequency 2095149527 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0 hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0 pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0 hdacc1: <Realtek ALC283 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC283 Audio Function Group> at nid 1 on hdacc1 pcm1: <Realtek ALC283 (Left Analog)> at nid 33 and 25 on hdaa1 Trying to mount root from zfs:zroot/ROOT/default []... ugen1.1: <Intel EHCI root HUB> at usbus1 ugen0.1: <Intel XHCI root HUB> at usbus0 uhub0 on usbus1 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1 on usbus0 uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <Samsung SSD 750 EVO 120GB MAT01B6Q> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors) ada0: quirks=0x1<4K> uhub1: 15 ports with 15 removable, self powered uhub0: 2 ports with 2 removable, self powered Root mount waiting for: usbus0 usbus1 ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 uhub2 on uhub0 uhub2: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1 ugen0.2: <vendor 0x8087 product 0x0a2b> at usbus0 uhub2: 8 ports with 8 removable, self powered Root mount waiting for: usbus0 usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device HGST Touro Mobile 3.0 (0x4971:0x1020) ugen0.3: <HGST Touro Mobile 3.0> at usbus0 umass0 on uhub1 umass0: <HGST Touro Mobile 3.0, class 0/0, rev 3.00/1.00, addr 2> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:1:0: Attached to scbus1 da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 da0: <HGST Touro Mobile 3.0 0> Fixed Direct Access SPC-4 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] da0: 400.000MB/s transfers da0: 953869MB (1953525168 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> Intel(R) Wireless WiFi based driver for FreeBSD ichsmb0: <Intel Wildcat Point-LP SMBus controller> port 0x3040-0x305f mem 0x7a138000-0x7a1380ff at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 iwm0: <Intel(R) Dual Band Wireless AC 8265> mem 0x7a000000-0x7a001fff at device 0.0 on pci2 iwm0: hw rev 0x230, fw ver 22.361476.0, address [_MAC_XXXXXXXXXX] lo0: link state changed to UP em0: link state changed to UP