Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-04-01 19:48:27
From: rhd
Description: FreeBSD/amd64 on Supermicro Super Server
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.1-RELEASE-p6 GENERIC amd64 FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) VT(efifb): resolution 800x600 CPU: Intel(R) Xeon(R) CPU D-1528 @ 1.90GHz (1900.09-MHz K8-class CPU) Origin="GenuineIntel" Id=0x50663 Family=0x6 Model=0x56 Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE> Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 68717379584 (65534 MB) avail memory = 66702303232 (63612 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <SUPERM SMCI--MB> FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 Launching APs: 1 10 11 4 7 6 8 9 2 3 5 random: entropy device external interface kbd1 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0xf05b0-0xf05ce smbios0: Version: 2.8, BCD Revision: 2.7 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <SUPERM SMCI--MB> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 340 Event timer "HPET2" frequency 14318180 Hz quality 340 Event timer "HPET3" frequency 14318180 Hz quality 340 Event timer "HPET4" frequency 14318180 Hz quality 340 Event timer "HPET5" frequency 14318180 Hz quality 340 Event timer "HPET6" frequency 14318180 Hz quality 340 Event timer "HPET7" frequency 14318180 Hz quality 340 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <dasp, performance counters> at device 11.1 (no driver attached) pci0: <dasp, performance counters> at device 11.2 (no driver attached) pci0: <dasp, performance counters> at device 16.1 (no driver attached) pci0: <dasp, performance counters> at device 16.6 (no driver attached) pci0: <dasp, performance counters> at device 18.1 (no driver attached) acpi_syscontainer0: <System Container> on acpi0 apei0: <ACPI Platform Error Interface> on acpi0 pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci1 pci2: <ACPI PCI bus> on pcib2 nvme0: <Generic NVMe Device> mem 0xfb400000-0xfb403fff irq 16 at device 0.0 on pci2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci1 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 16 at device 2.2 on pci1 ACPI Warning: \134_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20201113/nsprepkg-251) pci4: <ACPI PCI bus> on pcib4 pcib4: no PRT entry for 3.0.INTA pcib4: no PRT entry for 3.0.INTB ix0: <Intel(R) X552/X557-AT (10GBASE-T)> mem 0xfbc00000-0xfbdfffff,0xfbe04000-0xfbe07fff irq 11 at device 0.0 on pci4 ix0: Using 2048 TX descriptors and 2048 RX descriptors ix0: Using 6 RX queues 6 TX queues ix0: Using MSI-X interrupts with 7 vectors ix0: allocated for 6 queues ix0: allocated for 6 rx queues ix0: Ethernet address: [_MAC_XXXXXXXXXX] ix0: eTrack 0x800006b7 PHY FW V523 ix0: netmap queues/slots: TX 6/2048, RX 6/2048 ix1: <Intel(R) X552/X557-AT (10GBASE-T)> mem 0xfba00000-0xfbbfffff,0xfbe00000-0xfbe03fff irq 10 at device 0.1 on pci4 ix1: Using 2048 TX descriptors and 2048 RX descriptors ix1: Using 6 RX queues 6 TX queues ix1: Using MSI-X interrupts with 7 vectors ix1: allocated for 6 queues ix1: allocated for 6 rx queues ix1: Ethernet address: [_MAC_XXXXXXXXXX] ix1: eTrack 0x800006b7 PHY FW V523 ix1: netmap queues/slots: TX 6/2048, RX 6/2048 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci1 pci5: <ACPI PCI bus> on pcib5 xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xfb500000-0xfb50ffff irq 19 at device 20.0 on pci1 xhci0: 32 bytes context size, 64-bit DMA usbus0: waiting for BIOS to give up control xhci_interrupt: host controller halted xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci1: <simple comms> at device 22.0 (no driver attached) pci1: <simple comms> at device 22.1 (no driver attached) ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xfb514000-0xfb5143ff irq 18 at device 26.0 on pci1 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci1 pci6: <ACPI PCI bus> on pcib6 igb0: <Intel(R) I350 (Copper)> port 0xe020-0xe03f mem 0xfb120000-0xfb13ffff,0xfb144000-0xfb147fff irq 16 at device 0.0 on pci6 igb0: EEPROM V1.63-0 eTrack 0x800009fa igb0: Using 1024 TX descriptors and 1024 RX descriptors igb0: Using 6 RX queues 6 TX queues igb0: Using MSI-X interrupts with 7 vectors igb0: Ethernet address: [_MAC_XXXXXXXXXX] igb0: netmap queues/slots: TX 6/1024, RX 6/1024 igb1: <Intel(R) I350 (Copper)> port 0xe000-0xe01f mem 0xfb100000-0xfb11ffff,0xfb140000-0xfb143fff irq 17 at device 0.1 on pci6 igb1: EEPROM V1.63-0 eTrack 0x800009fa igb1: Using 1024 TX descriptors and 1024 RX descriptors igb1: Using 6 RX queues 6 TX queues igb1: Using MSI-X interrupts with 7 vectors igb1: Ethernet address: [_MAC_XXXXXXXXXX] igb1: netmap queues/slots: TX 6/1024, RX 6/1024 pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci1 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7 pci8: <ACPI PCI bus> on pcib8 vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xfa000000-0xfaffffff,0xfb000000-0xfb01ffff irq 18 at device 0.0 on pci8 vgapci0: Boot video device ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xfb513000-0xfb5133ff irq 18 at device 29.0 on pci1 usbus2: EHCI version 1.0 usbus2 on ehci1 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci1 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xfb512000-0xfb5127ff irq 16 at device 31.2 on pci1 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC" frequency 1899998183 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen1.1: <Intel EHCI root HUB> at usbus1 ugen2.1: <Intel EHCI root HUB> at usbus2 ugen0.1: <Intel XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub1 on usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub2 on usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 nvd0: <Samsung SSD 970 EVO 1TB> NVMe namespace nvd0: 953869MB (1953525168 512 byte sectors) GEOM_ELI: Device nvd0p4.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: accelerated software ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 ada0: <ST12000VN0008-2PH103 SC61> ACS-4 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 11444224MB (23437770752 512 byte sectors) ada1 at ahcich2 bus 0 scbus2 target 0 lun 0 ada1: <ST12000VN0008-2PH103 SC61> ACS-4 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 11444224MB (23437770752 512 byte sectors) ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: ada0,pass0 in 'Slot 01', SATA Slot: scbus1 target 0 ses0: ada1,pass1 in 'Slot 02', SATA Slot: scbus2 target 0 Trying to mount root from zfs:zroot/ROOT/default []... uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub0: 21 ports with 21 removable, self powered Root mount waiting for: usbus0 usbus1 usbus2 ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 uhub3 on uhub0 uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 1> on usbus0 uhub3: MTT enabled ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 uhub4 on uhub1 uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 uhub5 on uhub2 uhub5: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 uhub4: 4 ports with 4 removable, self powered uhub5: 4 ports with 4 removable, self powered uhub3: 4 ports with 4 removable, self powered ugen0.3: <vendor 0x0557 product 0x7000> at usbus0 uhub6 on uhub0 uhub6: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 2> on usbus0 uhub6: 4 ports with 3 removable, self powered Root mount waiting for: usbus0 ugen0.4: <vendor 0x0557 product 0x2419> at usbus0 ukbd0 on uhub6 ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 3> on usbus0 kbd2 at ukbd0 Dual Console: Video Primary, Serial Secondary GEOM_ELI: Device nvd0p3.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: accelerated software ichsmb0: <Intel Lynx Point SMBus controller> port 0xf000-0xf01f mem 0xfb511000-0xfb5110ff irq 18 at device 31.3 on pci1 smbus0: <System Management Bus> on ichsmb0 pchtherm0: <Haswell Thermal Subsystem> mem 0xfb510000-0xfb510fff irq 18 at device 31.6 on pci1 pchtherm0: Enabling Sensor ioat0: <BDXDE IOAT Ch0> mem 0xfb306000-0xfb307fff irq 16 at device 0.0 on pci3 ioat0: Capabilities: c2641<Completion_Timeout_Support,DMA_with_Multicasting_Support,Descriptor_Write_Back_Error_Support,DMA_with_DIF,PQ,Block_Fill,Page_Break> ioat1: <BDXDE IOAT Ch1> mem 0xfb304000-0xfb305fff irq 17 at device 0.1 on pci3 ioat1: Capabilities: c2641<Completion_Timeout_Support,DMA_with_Multicasting_Support,Descriptor_Write_Back_Error_Support,DMA_with_DIF,PQ,Block_Fill,Page_Break> ioat2: <BDXDE IOAT Ch2> mem 0xfb302000-0xfb303fff irq 18 at device 0.2 on pci3 ioat2: Capabilities: c2641<Completion_Timeout_Support,DMA_with_Multicasting_Support,Descriptor_Write_Back_Error_Support,DMA_with_DIF,PQ,Block_Fill,Page_Break> ioat3: <BDXDE IOAT Ch3> mem 0xfb300000-0xfb301fff irq 19 at device 0.3 on pci3 ioat3: Capabilities: c2641<Completion_Timeout_Support,DMA_with_Multicasting_Support,Descriptor_Write_Back_Error_Support,DMA_with_DIF,PQ,Block_Fill,Page_Break> acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi1: cannot find EC device lo0: link state changed to UP igb0: link state changed to UP ums0 on uhub6 ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 3> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0