Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-04-06 06:36:29
From: yamori813
Description: IXDP425 hungup ehci interrupt
RedBoot> load -r -b 0x200000 netbsd-IXDP425.bin Using default protocol (TFTP) Raw file loaded 0x00200000-0x007ac293, assumed entry at 0x00200000 RedBoot> go [ 1.0000000] Loaded initial symtab at 0xc0728c18, strtab at 0xc0766cc8, # entries 15039 [ 1.0000000] pmap_postinit: Allocated 35 static L1 descriptor tables [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.2 (IXDP425) #109: Thu Apr 6 15:34:42 JST 2023 [ 1.0000000] hiroki@netbsd:/usr/home/hiroki/netbsd-src/sys/arch/evbarm/compile/obj/IXDP425 [ 1.0000000] total memory = 65536 KB [ 1.0000000] avail memory = 52296 KB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0 core 0: IXP425 266MHz rev 1 (XScale V5TE core) [ 1.0000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.0000000] cpu0: L1 32KB/32B 32-way (32 set) VIVT Instruction cache [ 1.0000000] cpu0: L1 32KB/32B 32-way (32 set) write-back-locking VIVT Data cache [ 1.0000000] ixpsip0 at mainbus0 [ 1.0000000] com0 at ixpsip0 addr 0xc8000000-0xc8000fff: ns16550a, 16-byte FIFO [ 1.0000000] ixp425_intr_establish(irq=15, ipl=7, func=c02b8ff0, arg=c11b8040) [ 1.0000000] com1 at ixpsip0 addr 0xc8001000-0xc8001fff: ns16550a, 16-byte FIFO [ 1.0000000] com1: console [ 1.0000000] ixp425_intr_establish(irq=13, ipl=7, func=c02b8ff0, arg=c11b84c0) [ 1.0000000] ixpclk0 at ixpsip0 addr 0xc8005000-0xc800502f [ 1.0000000] ixpclk0: IXP425 Interval Timer [ 1.0000000] ixpdog0 at ixpsip0: Watchdog Timer [ 1.0000000] ixpgpio0 at ixpsip0 addr 0xc8004000-0xc8004fff: GPIO Controller [ 1.0000000] gpio0 at ixpgpio0: 16 pins [ 1.0000000] ixpio0 at mainbus0 [ 1.0000000] ixpio0: configuring PCI bus [ 1.0000000] pci0 at ixpio0 bus 0 [ 1.0000000] uhci0 at pci0 dev 20 function 0: VIA Technologies VT83C572 USB Controller (rev. 0x50) [ 1.0000000] ixdp425_pci_intr_map: v=0xc1197568, tag=0000a000 intrpin=1 line=0 dev=1 [ 1.0000000] ixdp425_pci_intr_establish(v=0xc1197380, irq=28, ipl=5, func=0xc02cb22c, arg=0xc11c0000) [ 1.0000000] ixp425_intr_establish(irq=28, ipl=5, func=c0204650, arg=c11bc000) [ 1.0000000] uhci0: interrupting at ixp425 irq 28 [ 1.0000000] usb0 at uhci0: USB revision 1.0 [ 1.0000000] uhci1 at pci0 dev 20 function 1: VIA Technologies VT83C572 USB Controller (rev. 0x50) [ 1.0000000] ixdp425_pci_intr_map: v=0xc1197568, tag=0000a100 intrpin=2 line=0 dev=1 [ 1.0000000] ixdp425_pci_intr_establish(v=0xc1197380, irq=27, ipl=5, func=0xc02cb22c, arg=0xc11c3000) [ 1.0000000] ixp425_intr_establish(irq=27, ipl=5, func=c0204650, arg=c11bc000) [ 1.0000000] uhci1: interrupting at ixp425 irq 27 [ 1.0000000] usb1 at uhci1: USB revision 1.0 [ 1.0000000] ehci0 at pci0 dev 20 function 2: VIA Technologies VT8237 EHCI USB Controller (rev. 0x51) [ 1.0000000] ixdp425_pci_intr_map: v=0xc1197568, tag=0000a200 intrpin=3 line=0 dev=1 [ 1.0000000] ixdp425_pci_intr_establish(v=0xc1197380, irq=26, ipl=5, func=0xc02d4e10, arg=0xc11bc800) [ 1.0000000] ixp425_intr_establish(irq=26, ipl=5, func=c0204650, arg=c11bc000) [ 1.0000000] ehci0: interrupting at ixp425 irq 26 [ 1.0000000] ehci0: dropped intr workaround enabled [ 1.0000000] ehci0: 2 companion controllers, 2 ports each: uhci0 uhci1 [ 1.0000000] usb2 at ehci0: USB revision 2.0 [ 1.0000000] ixme0 at mainbus0: IXP4xx MicroEngine Support [ 1.0000000] ixp425_intr_establish(irq=3, ipl=5, func=c0205194, arg=c11cb000) [ 1.0000000] ixp425_intr_establish(irq=4, ipl=5, func=c0205194, arg=c11cb000) [ 1.0000000] ixpnpe0 at ixme0 NPE-B [ 1.0000000] ixp425_intr_establish(irq=1, ipl=5, func=c0206d98, arg=c11c6940) [ 1.0000000] npe0 at ixpnpe0: Ethernet co-processor [ 1.0000000] ixpnpe0: imageId 0x01000201 not found in image library header [ 1.0000000] npe0: Failed to activate NPE (missing microcode?) [ 1.0000000] ixpnpe1 at ixme0 NPE-C [ 1.0000000] ixp425_intr_establish(irq=2, ipl=5, func=c0206d98, arg=c11c6d00) [ 1.0000000] npe1 at ixpnpe1: Ethernet co-processor [ 1.0000000] ixpnpe1: imageId 0x02000201 not found in image library header [ 1.0000000] npe1: Failed to activate NPE (missing microcode?)