Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-04-13 02:37:15
From: yamori813
Description: OPENRDBASE use eSATA
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.99.2 (OPENRDBASE) #8: Sat Mar 18 07:42:15 JST 2023 [ 1.000000] hiroki@netbsd:/usr/home/hiroki/netbsd-src/sys/arch/evbarm/compile/obj/OPENRDBASE [ 1.000000] total memory = 512 MB [ 1.000000] avail memory = 497 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] mainbus0 (root) [ 1.000000] cpu0 at mainbus0 core 0: Sheeva 88SV131 rev 1 (ARM9E-S V5TE core) [ 1.000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.000000] cpu0: L1 16KB/32B 4-way (128 set) VIVT Instruction cache [ 1.000000] cpu0: L1 16KB/32B 4-way (128 set) write-back-locking-C VIVT Data cache [ 1.000000] mvsoc0 at mainbus0: Marvell 88F6281 Rev. A1 Kirkwood [ 1.000000] mvsoc0: CPU Clock 1200.000 MHz SysClock 400.000 MHz TClock 200.000 MHz [ 1.000000] mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff irq 65: Marvell SoC Timer [ 1.000000] mvsocgpp0 at mvsoc0 unit 0 offset 0x10100-0x101ff irq 35: Marvell SoC General Purpose I/O Port Interface [ 1.000000] mvsocgpp0: 50 gpio pins [ 1.000000] mvsocgpp0: interrupts 96..103, intr 35 [ 1.000000] mvsocgpp0: interrupts 104..111, intr 36 [ 1.000000] mvsocgpp0: interrupts 112..119, intr 37 [ 1.000000] mvsocgpp0: interrupts 120..127, intr 38 [ 1.000000] mvsocgpp0: interrupts 128..135, intr 39 [ 1.000000] mvsocgpp0: interrupts 136..143, intr 40 [ 1.000000] mvsocgpp0: interrupts 144..151, intr 41 [ 1.000000] mvsocgpp0: Data Out: 0x00000000 [ 1.000000] mvsocgpp0: Data Out Enable Control: 0xefffffff [ 1.000000] mvsocgpp0: Data Blink Enable: 0x00000000 [ 1.000000] mvsocgpp0: Data In Polarity: 0x00000000 [ 1.000000] mvsocgpp0: Data In: 0x00000080 [ 1.000000] mvsocgpp0: Interrupt Cause: 0x00000000 [ 1.000000] mvsocgpp0: Interrupt Mask: 0x00000000 [ 1.000000] mvsocgpp0: Interrupt Level Mask: 0x00000000 [ 1.000000] mvsocgpp0: High Data Out: 0x00000004 [ 1.000000] mvsocgpp0: High Data Out Enable Ctrl: 0xfffffffb [ 1.000000] mvsocgpp0: High Blink Enable: 0x00000000 [ 1.000000] mvsocgpp0: High Data In Polarity: 0x00000000 [ 1.000000] mvsocgpp0: High Data In: 0x00000004 [ 1.000000] mvsocgpp0: High Interrupt Cause: 0x00000000 [ 1.000000] mvsocgpp0: High Interrupt Mask: 0x00000000 [ 1.000000] mvsocgpp0: High Interrupt Level Mask: 0x00000000 [ 1.000000] gpio0 at mvsocgpp0: 50 pins [ 1.000000] mvsocrtc0 at mvsoc0 unit 0 offset 0x10300-0x10317: Marvell SoC Real Time Clock [ 1.000000] com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 33: ns16550a, 16-byte FIFO [ 1.000000] com0: console [ 1.000000] com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 34: ns16550a, 16-byte FIFO [ 1.000000] ehci0 at mvsoc0 unit 0 offset 0x50000-0x50fff irq 19: Marvell USB 2.0 Interface [ 1.000000] ehci0: EHCI version 1.0 [ 1.000000] usb0 at ehci0: USB revision 2.0 [ 1.000000] gtidmac0 at mvsoc0 unit 0 offset 0x60000-0x60fff: Marvell IDMA Controller/XOR Engine [ 1.000000] gtidmac0: XOR Engine 4 channels, intr 5, 6, 7, 8 [ 1.000000] gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x110ff irq 29: Marvell TWSI controller [ 1.000000] iic0 at gttwsi0: I2C bus [ 1.000000] mvcesa0 at mvsoc0 unit 0 offset 0x3d000-0x3dfff irq 22: Marvell Cryptographic Engines and Security Accelerator [ 1.000000] mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit Ethernet Controller [ 1.000000] mvgbe0 at mvgbec0 port 0 irq 11 [ 1.000000] mvgbe0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] makphy0 at mvgbe0 phy 8: Marvell 88E1116R Gigabit PHY, rev. 0 [ 1.000000] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.000000] mvgbec1 at mvsoc0 unit 1 offset 0x74000-0x77fff: Marvell Gigabit Ethernet Controller [ 1.000000] mvgbe at mvgbec1 port 0 not configured [ 1.000000] mvpex at mvsoc0 unit 0 not configured [ 1.000000] mvsata0 at mvsoc0 unit 0 offset 0x80000-0x87fff irq 21: Marvell Serial-ATA Host Controller (SATAHC) [ 1.000000] mvsata0: GenIIe, 1hc, 2port/hc [ 1.000000] atabus0 at mvsata0 channel 0 [ 1.000000] atabus1 at mvsata0 channel 1 [ 1.000000] mvsdio0 at mvsoc0 unit 0 offset 0x90000-0x9ffff irq 28: Marvell Secure Digital Input/Output Interface [ 1.000000] sdmmc0 at mvsdio0 [ 1.000000] timecounter: Timecounter "mvsoctmr0" frequency 200000000 Hz quality 100 [ 1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.000003] WARNING: system needs entropy for security; see entropy(7) [ 1.019973] uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.019973] uhub0: 1 port with 1 removable, self powered [ 1.099961] mvsata0 port 1: device present, speed: 3.0Gb/s [ 2.029966] uhub1 at uhub0 port 1: vendor 05e3 (0x05e3) USB2.0 Hub (0x0610), class 9/0, rev 2.00/77.32, addr 2 [ 2.029966] uhub1: multiple transaction translators [ 2.029966] uhub1: 4 ports with 3 removable, self powered [ 2.109964] wd0 at atabus1 drive 0 [ 2.109964] wd0: <WDC WD2500AAKX-193CA0> [ 2.109964] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 2.109964] wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors [ 2.169962] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO [ 2.169962] wd0(mvsata0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO [ 2.879966] uhub2 at uhub1 port 1: vendor 05e3 (0x05e3) USB2.0 Hub (0x0610), class 9/0, rev 2.00/77.32, addr 3 [ 2.879966] uhub2: multiple transaction translators [ 2.879966] uhub2: 4 ports with 4 removable, self powered [ 3.229963] boot device: <unknown> [ 3.229963] unknown device major 0xffffffffffffffff [ 4.239963] unknown device major 0xffffffffffffffff [ 5.239964] unknown device major 0xffffffffffffffff [ 6.239962] unknown device major 0xffffffffffffffff [ 7.239963] unknown device major 0xffffffffffffffff [ 8.239963] unknown device major 0xffffffffffffffff [ 9.239964] unknown device major 0xffffffffffffffff [ 10.239964] unknown device major 0xffffffffffffffff [ 11.239965] unknown device major 0xffffffffffffffff [ 12.239965] unknown device major 0xffffffffffffffff [ 13.239966] unknown device major 0xffffffffffffffff [ 14.239966] unknown device major 0xffffffffffffffff [ 15.239966] unknown device major 0xffffffffffffffff [ 16.239967] unknown device major 0xffffffffffffffff [ 17.239968] unknown device major 0xffffffffffffffff [ 18.239968] unknown device major 0xffffffffffffffff [ 19.239969] unknown device major 0xffffffffffffffff [ 20.239969] unknown device major 0xffffffffffffffff [ 21.239969] unknown device major 0xffffffffffffffff [ 22.239970] unknown device major 0xffffffffffffffff [ 23.239971] unknown device major 0xffffffffffffffff [ 23.239971] root device: wd0 [ 23.239971] dump device (default wd0b): [ 23.239971] file system (default generic): [ 23.239971] root on wd0a dumps on wd0b [ 23.749984] root file system type: ffs [ 23.769981] kern.module.path=/stand/evbarm/10.99.2/modules [ 23.789982] init path (default /sbin/init): [ 23.789982] init: trying /sbin/init [ 25.769977] entropy: ready