NYC*BUG dmesgd

Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

---

Date: 2023-04-20 02:02:14
From: yamori813
Description: Buffalo_WZR-HP-G301NH

---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.4-STABLE zrouter_yamori813-n234803-50597bd76a22 Buffalo_WZR-HP-G301NH mips
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "kernel" at 0x80549dc0.
CPU: MIPS Technologies (Atheros AR9132 rev 2) processor v116.147
  MMU: Standard TLB, 16 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes)
  L1 i-cache: 4 ways of 512 sets, 32 bytes per line
  L1 d-cache: 4 ways of 256 sets, 32 bytes per line
  L2 cache: disabled
  Config1=0x9ee3519e<PerfCount,WatchRegs,MIPS16,EJTAG>
  Config2=0x80000000
  Config3=0x20<VInt>
  Config7=0x0
real memory  = 67108864 (65536K bytes)
Physical memory chunk(s):
0x005dc000 - 0x03ef8fff, 59887616 bytes (14621 pages)
avail memory = 59047936 (56MB)
random: no preloaded entropy cache
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
hostuuid: using 00000000-0000-0000-0000-000000000000
random: entropy device external interface
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
wlan: <802.11 Link Layer>
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
mem: <memory>
crypto: <crypto core>
null: <full device, null device, zero device>
[ath_hal] loaded
nexus0: <MIPS32 root nexus>
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 200000000 Hz quality 800
Event timer "MIPS32" frequency 200000000 Hz quality 800
cryptosoft0: <software crypto> on nexus0
crypto: assign cryptosoft0 driver id 0, flags 0x6000000
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 34 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 35 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 36 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 37 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 40 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 39 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 38 flags 0 maxoplen 0
apb0 at irq 4 on nexus0
uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0
uart0: console (115200,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0
gpio0: [GIANT-LOCKED]
gpio0: function_set: 0x2000
gpio0: function_clear: 0x0
gpio0: gpio pinmask=0x1e5040
gpiobus0: <GPIO bus> on gpio0
gpioiic0: <GPIO I2C> at pins 19-20 on gpiobus0
gpioiic0: SCL pin: gpiobus0:20, SDA pin: gpiobus0:19
iicbb0: <I2C bit-banging driver> on gpioiic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iic0: <I2C generic I/O> on iicbus0
rtl8366rb0: <RTL8366RB Ethernet Switch Controller> at addr 0xa8 on iicbus0
rtl8366rb0: rev. 3
miibus0: <MII bus> on rtl8366rb0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: OUI 0x00e04c, model 0x0016, rev. 1
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus1: <MII bus> on rtl8366rb0
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1: OUI 0x00e04c, model 0x0016, rev. 1
ukphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus2: <MII bus> on rtl8366rb0
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
ukphy2: OUI 0x00e04c, model 0x0016, rev. 1
ukphy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus3: <MII bus> on rtl8366rb0
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
ukphy3: OUI 0x00e04c, model 0x0016, rev. 1
ukphy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
etherswitch0: <Switch controller> on rtl8366rb0
mdio0: <MDIO> on rtl8366rb0
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
gpioled0: <GPIO led> at pin 6 on gpiobus0
gpioled1: <GPIO led> at pin 17 on gpiobus0
gpioled2: <GPIO led> at pin 18 on gpiobus0
gpiobus0: <unknown device> at pin 12
gpiobus0: <unknown device> at pin 13
gpioc0: <GPIO controller> on gpio0
arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0
arge0: arge_fetch_pll_config: pll_1000 = 0x1f000000
arge0: arge_attach: overriding MII mode to 'RGMII'
arge0: Generating random ethernet address.
mii_attach_proxy: not attaching, no mdio device hint for arge0
arge0: finishing attachment, phymask 0000, proxy null 
arge0: bpf attached
arge0: Ethernet address: [_MAC_XXXXXXXXXX]
arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0
arge1: Overriding MAC from EEPROM
arge1: arge_fetch_pll_config: pll_1000 = 0x100
arge1: arge_attach: overriding MII mode to 'RGMII'
miiproxy0: <MII/MDIO proxy, MII side> on arge1
miiproxy0: attached to target mdio0
arge1: finishing attachment, phymask 0010, proxy set 
miibus4: <MII bus> on miiproxy0
ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4
ukphy4: OUI 0x00e04c, model 0x0016, rev. 1
ukphy4:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
arge1: bpf attached
arge1: Ethernet address: [_MAC_XXXXXXXXXX]
spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0
spibus0: <SPI bus> on spi0
ehci0: <AR71XX Integrated USB 2.0 controller> at mem 0x1b000100-0x1bffffff irq 1 on nexus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
cfi0 at mem 0xbe000000-0xbfffffff on nexus0
cfi0: [256x128KB]
cfid0 on cfi0
ath0: Vendor=0x168c, Device=0x000b
ath0: Vendor=0x168c, Device=0x000b
ath0: <Atheros 9130> at mem 0x180c0000-0x180effff irq 0 on nexus0
ath0: unable to attach hardware; HAL status 8
Unimplemented nexus_teardown_intr at /usr/home/hiroki/freebsd-src/sys/mips/mips/nexus.c:511
device_attach: ath0 attach returned 6
ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0
ar71xx_wdog0: Previous reset was due to watchdog timeout
Device configuration finished.
Timecounters tick every 1.000 msec
lo0: bpf attached
enc0: bpf attached
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024
IPsec: Initialized Security Association Processing.
rtl8366rb0port0: link state changed to DOWN
rtl8366rb0port1: link state changed to DOWN
rtl8366rb0port2: link state changed to DOWN
rtl8366rb0port3: link state changed to DOWN
GEOM: new disk cfid0
usbus0: 480Mbps High Speed USB v2.0
Trying to mount root from cd9660:/dev/map/rootfs.uzip []...
MAP: cfid0: 0x40000, data=0x40000 "/dev/map/uboot"
MAP: cfid0: 40000x20000, data=0x20000 "/dev/map/uboot_environ"
MAP: search cfid0 for key ".!/bin/sh" from 0x100000, step 0x10000
ugen0.1: <Atheros EHCI root HUB> at usbus0
uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
MAP: cfid0: 60000x1a0000, data=0x1a0000 "/dev/map/kernel"
MAP: search cfid0 for key ".!/bin/sh" from 0x100000, step 0x10000
MAP: cfid0: 200000x1dc0000, data=0x1dc0000 "/dev/map/rootfs"
MAP: cfid0: 1fc0000x20000, data=0x20000 "/dev/map/config"
MAP: cfid0: 1fe0000x20000, data=0x20000 "/dev/map/ART"
MAP: cfid0: 60000x1f60000, data=0x1f60000 "/dev/map/upgrade"
MAP: No valid partition found at map/rootfs.uzip
cd9660: RockRidge Extension
Warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
uhub0: 1 port with 1 removable, self powered
ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 2> on usbus0
rtl8366rb0port0: link state changed to UP
rtl8366rb0port1: link state changed to UP
rtl8366rb0port2: link state changed to UP
rtl8366rb0port3: link state changed to UP
uhub1: 4 ports with 4 removable, self powered
MAP: No valid partition found at md0
random: unblocking device.
MAP: No valid partition found at md0
lo0: link state changed to UP
/tmp: optimization changed from SPACE to TIME
arge1: link state changed to DOWN
WARNING: attempt to domain_add(netgraph) after domainfinalize()

All comments/news/posts are the property of their individual owner and is presented without warranty of suitability, and solely as an informational resource.
This site Copyright © 2004-2024 NYC*BUG.