Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2023-05-04 09:21:09
From: herauthon
Description: SUN Netra AC200 - prelim session - better follows
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019, 2020, 2021, 2022 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 9.3 (GENERIC) #0: Thu Aug 4 15:30:37 UTC 2022 [ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC [ 1.0000000] total memory = 1024 MB [ 1.0000000] avail memory = 986 MB [ 1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.0000000] mainbus0 (root): SUNW,UltraAX-i2 (Netra T1 200): [_HOSTID_XXXXX] [ 1.0000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 500 MHz, CPU id 0 [ 1.0000000] cpu0: manuf 17, impl 13, mask 14 [ 1.0000000] cpu0: system tick frequency 11.111 MHz [ 1.0000000] cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64 b/l) [ 1.0000000] psycho0 at mainbus0 [ 1.0000000] psycho0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0 [ 1.0000000] psycho_alloc_extent: no "available" property [ 1.0000000] psycho_alloc_extent: no "available" property [ 1.0000000] pci0 at psycho0 [ 1.0000000] ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI Bridge (rev. 0x13) [ 1.0000000] pci1 at ppb0 bus 1 [ 1.0000000] ebus0 at pci1 dev 12 function 0: Sun Microsystems PCIO Ebus2 (US III), revision 0x01 [ 1.0000000] flashprom at ebus0 addr 0-fffff not configured [ 1.0000000] clock0 at ebus0 addr 0-1fff: mk48t59 ebus_attach: idprom: incomplete [ 1.0000000] lom0 at ebus0 addr 200000-200003 ipl 2a: SUNW,lomh: LOMlite2 rev 3.12 [ 1.0000000] alipm0 at pci1 dev 3 function 0: 74KHz clock [ 1.0000000] iic0 at alipm0: I2C bus [ 1.0000000] admtemp0 at iic0 addr 0x18: MAX1617A temperature sensor: id. 0x41, rev. 0x3c [ 1.0000000] spdmem0 at iic0 addr 0x54 [ 1.0000000] spdmem0: SDRAM (registered), data ECC, 512MB, 133MHz (PC-133) [ 1.0000000] spdmem1 at iic0 addr 0x55 [ 1.0000000] spdmem1: SDRAM (registered), data ECC, 512MB, 133MHz (PC-133) [ 1.0000000] seeprom0 at iic0 addr 0x50: i2c-nvram: size 8192 [ 1.0000000] seeprom1 at iic0 addr 0x51: motherboard-fru: size 8192 [ 1.0000000] ebus1 at pci1 dev 7 function 0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00 [ 1.0000000] power at ebus1 addr 800-82f ipl 25 not configured [ 1.0000000] com0 at ebus1 addr 3f8-3ff ipl 2b: ns16550a, working fifo [ 1.0000000] com0: console [ 1.0000000] com1 at ebus1 addr 2e8-2ef ipl 2b: ns16550a, working fifo [ 1.0000000] gem0 at pci1 dev 12 function 1: Sun Microsystems ERI Ethernet (rev. 0x01) [ 1.0000000] gem0: interrupting at ivec 3006 [ 1.0000000] ukphy0 at gem0 phy 1: OUI 0x0008bb, model 0x0002, rev. 1 [ 1.0000000] ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0000000] gem0: Ethernet address [_MAC_XXXXXXXXXX], 2KB RX fifo, 2KB TX fifo [ 1.0000000] ohci0 at pci1 dev 12 function 3: Sun Microsystems USB Controller (rev. 0x01) [ 1.0000000] ohci0: interrupting at ivec 24 [ 1.0000000] ohci0: OHCI version 1.0, legacy support [ 1.0000000] usb0 at ohci0: USB revision 1.0 [ 1.0000000] aceride0 at pci1 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3) [ 1.0000000] aceride0: using ivec 180c for native-PCI interrupt [ 1.0000000] atabus0 at aceride0 channel 0 [ 1.0000000] atabus1 at aceride0 channel 1 [ 1.0000000] gem1 at pci1 dev 5 function 1: Sun Microsystems ERI Ethernet (rev. 0x01) [ 1.0000000] gem1: interrupting at ivec 301c [ 1.0000000] ukphy1 at gem1 phy 1: OUI 0x0008bb, model 0x0002, rev. 1 [ 1.0000000] ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0000000] gem1: Ethernet address [_MAC_XXXXXXXXXX], 2KB RX fifo, 2KB TX fifo [ 1.0000000] ohci1 at pci1 dev 5 function 3: Sun Microsystems USB Controller (rev. 0x01) [ 1.0000000] ohci1: interrupting at ivec 26 [ 1.0000000] ohci1: OHCI version 1.0, legacy support [ 1.0000000] usb1 at ohci1: USB revision 1.0 [ 1.0000000] ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI Bridge (rev. 0x13) [ 1.0000000] pci2 at ppb1 bus 2 [ 1.0000000] esiop0 at pci2 dev 8 function 0: Symbios Logic 53c896 (ultra2-wide scsi) [ 1.0000000] esiop0: using on-board RAM [ 1.0000000] esiop0: interrupting at ivec 1820 [ 1.0000000] scsibus0 at esiop0: 16 targets, 8 luns per target [ 1.0000000] esiop1 at pci2 dev 8 function 1: Symbios Logic 53c896 (ultra2-wide scsi) [ 1.0000000] esiop1: using on-board RAM [ 1.0000000] esiop1: interrupting at ivec 1820 [ 1.0000000] scsibus1 at esiop1: 16 targets, 8 luns per target [ 1.0000000] pdcide0 at pci2 dev 5 function 0: Promise Ultra133/ATA Bus Master IDE Accelerator (rev. 0x02) [ 1.0000000] pdcide0: using ivec 15 for native-PCI interrupt [ 1.0000000] atabus2 at pdcide0 channel 0 [ 1.0000000] atabus3 at pdcide0 channel 1 [ 1.0000000] pcons at mainbus0 not configured [ 1.0000353] No counter-timer -- using STICK at 11.111MHz as system clock. [ 1.1000151] scsibus0: waiting 2 seconds for devices to settle... [ 1.1769870] scsibus1: waiting 2 seconds for devices to settle... [ 1.2487554] atapibus0 at atabus0: 2 targets [ 1.3000107] uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.4063362] uhub1 at usb1: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.5103479] cd0 at atapibus0 drive 0: <CD-224E, , 1.7A> cdrom removable [ 3.8100094] umass0 at uhub0 port 1 configuration 1 interface 0 [ 3.8814203] umass0: Generic (0x14cd) Mass Storage Device (0x1212), rev 2.00/1.00, addr 2 [ 3.9781497] scsibus2 at umass0: 2 targets, 1 lun per target [ 7.9600026] sd0 at scsibus2 target 0 lun 0: <Mass, Storage Device, 1.00> disk removable [ 8.1000033] sd0: fabricating a geometry [ 8.1457276] sd0: 59328 MB, 59328 cyl, 64 head, 32 sec, 512 bytes/sect x 121503744 sectors [ 8.2900036] sd0: fabricating a geometry [ 8.3800033] WARNING: 1 error while detecting hardware; check system log. [ 8.4800031] root on sd0a dumps on sd0b [ 8.6000038] root file system type: ffs [ 8.6700024] kern.module.path=/stand/sparc64/9.3/modules