Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-05-06 16:44:48
From: herauthon
Description: netra T1/ac200 usparcII - bootmode - FreeBSD sparc64
Welcome to minicom 2.8
OPTIONS: I18n
Port /dev/ttyS0, 08:56:32
Press CTRL-A Z for help on special keys
lom>poweron
lom>
LOM event: +5d+17h54m10s host power on
gic!
Setting default values Done
Bootmode is 0
[New I2C DIMM address]
MCR0 = 36a0bc04
MCR1 = c0804000
MCR2 = f3000ff
MCR3 = cf
Ecache Size = 256 KB
NVRAM Test
Icache Test
Dcache Test
MMU Test
FPU Test
Ecache Tag Addr Test
Ecache RAM Addr Test
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing memory
Done
MEMBASE=0x20000000
MEMSIZE=0x20000000
Data Line Test
Core Memory Test
Clearing memory...including Unix retained memory...Done
Turning ON MMUs Done
Copy ROM to RAM (170048 bytes) Done
Orig PC=0x1fff0007e44 New PC=0xf0f07e9c
Processor Speed=500MHz
Memory Data Line Test
Memory Addr Line w/ Ecache Test
ECC Block Memory Test
Memory test stopped by user
Looking for Dropin cPOST ... found
Copying Client...Done
Transferring control to Client...
Sun Microsystems, Inc. cPOST
@(#) cpost 1.0.14 2002/07/03 09:17
All Basic UltraSPARC IIe PBM Tests
Init CPU PBM
PIO Decoder And BCT Test
CPU IOMMU Reg Test
CPU IOMMU RAM NTA Test
CPU IOMMU CAM NTA Test
CPU IOMMU RAM Address Test
CPU IOMMU CAM Address Test
IOMMU TLB Compare Test
IOMMU TLB Flush Test
PBM Control/Status Reg Test
PBM Diag Reg Test
CPU PBM Reg Test
All Basic APB Simba Tests
Init PCI
All Basic RIO Tests (RIO# 1)
RIO Ebus Config Space Reg Test
RIO Network Config Space Reg Test
RIO Firewire Config Space Reg Test
RIO USB Config Space Reg Test
All Basic RIO Tests (RIO# 2)
RIO Ebus Config Space Reg Test
RIO Network Config Space Reg Test
RIO Firewire Config Space Reg Test
RIO USB Config Space Reg Test
All Basic SCSI Controller Tests
Symbios SCSI Controller PCI Config Space Test
All Basic SCSI Controller Tests
Symbios SCSI Controller PCI Config Space Test
Basic SouthBridge Tests
Southbridge ISA Config Space Reg Test
Southbridge PMU Config Space Reg Test
Southbridge IDE Config Space Reg Test
Southbridge Audio Config Space Reg Test
All Memory Stress Tests
Consist Write Data Test
Resetting...
Processor Speed = 500 MHz
Baud rate is 9600
8 Data bits, 1 stop bits, no parity (configured from lom)
Firmware CORE Sun Microsystems, Inc.
@(#) core 1.0.14 2002/07/03 09:16
Software Power ON
Verifying NVRAM...Done
Bootmode is 0
[New I2C DIMM address]
MCR0 = 36a0bc04
MCR1 = c0804000
MCR2 = f3000ff
MCR3 = cf
Ecache Size = 256 KB
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing memory
Done
MEMBASE=0x20000000
MEMSIZE=0x20000000
Clearing memory...Done
Turning ON MMUs Done
Copy ROM to RAM (170048 bytes) Done
Orig PC=0x1fff0007e44 New PC=0xf0f07e9c
Processor Speed=500MHz
Looking for Dropin FVM ... found
Decompressing Client Done
Transferring control to Client...
ttya initialized
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing upa at 1f,0 pci pci pci
Probing upa at 0,0 SUNW,UltraSPARC-IIe SUNW,UltraSPARC-IIe (256 Kb)
Loading Support Packages: kbd-translator
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]... dimm dimm i2c-nvram
jumping to kernel entry at 0xc00c0000.
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
OpenBootThe Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.4-RELEASE r372781 GENERIC sparc64
gcc version 4.2.1 20070831 patched [FreeBSD]
real memory = 1073741824 (1024 MB)
avail memory = 1027604480 (980 MB)
cpu0: Sun Microsystems UltraSparc-IIe Processor (500.00 MHz CPU)
arc4random: WARNING: initial seeding bypassed the cryptographic random device b.
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0Firmware console
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
[ath_hal] loadedbootstrap loader, Revision 1.0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.
WARNING: Device "openprom" is Giant locked and may be deleted before FreeBSD 14.
nexus0: <Open Firmware Nexus device>f2978 syms=[0x8+0xe8ea8+0x8+0xdd2c8]
pcib0: <U2P UPA-PCI bridge> mem 0x1fe00000000-0x1fe0000ffff,0x1fe01000000-0x1fe0
pcib0: Sabre, impl 0, version 0, IGN 0x1f, bus A, 66MHz
pcib0: DVMA map: 0xc0000000 to 0xc3ffffff 8192 entries
pci0: <OFW PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
pci1: <OFW PCI bus> on pcib1
ebus0: <PCI-EBus3 bridge> mem 0xf0000000-0xf0ffffff,0xf1000000-0xf17fffff at de1
ebus0: <idprom>: incomplete
pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
pci2: <OFW PCI bus> on pcib2
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: mk48txx_attach: battery low
eeprom0: cannot attach time of day clock
device_attach: eeprom0 attach returned 6
ebus0: <SUNW,lomh> addr 0x1400200000-0x1400200003 irq 42 (no driver attached)
pci1: <old, non-VGA display device> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci1
isa0: <ISA bus> on isab0
gem0: <Sun ERI 10/100 Ethernet> mem 0xe0400000-0xe041ffff at device 12.1 on pci1
miibus0: <MII bus> on gem0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
gem0: 2kB RX FIFO, 2kB TX FIFO
nexus0: <syscons> type unknow> on nexus0ci1
ohci0: <Sun PCIO-2 USB controller> mem 0xe2000000-0xe2007fff at device 12.3 on 1
usbus0 on ohci0
atapci0: <AcerLabs M5229 UDMA66 controller> port 0x400-0x407,0x418-0x41b,0x410-1
atapci0: using PIO transfers above 137GB as workaround for 48bit DMA access buge
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
gem1: <Sun ERI 10/100 Ethernet> mem 0xe0440000-0xe045ffff at device 5.1 on pci1
miibus1: <MII bus> on gem1
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
gem1: 2kB RX FIFO, 2kB TX FIFO
gem1: Ethernet address: [_MAC_XXXXXXXXXX]
stray vector interrupt 2015
ohci1: <Sun PCIO-2 USB controller> mem 0xe5000000-0xe5007fff at device 5.3 on p1
usbus1 on ohci1
sym0: <896> port 0xc00000-0xc000ff mem 0x2000-0x23ff,0x4000-0x5fff at device 8.2
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: <896> port 0xc00100-0xc001ff mem 0x6000-0x63ff,0x8000-0x9fff at device 8.2
sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
atapci1: <SiI 3512 SATA150 controller> port 0xc00200-0xc00207,0xc00208-0xc0020b
n (no driver attached)
uart0: console (9600,n,8,1)> at port 0x3f8-0x3ff irq 43 pnpid PNP0501 on isa0
uart1: <16550 or compatible> at port 0x2e8-0x2ef irq 43 pnpid PNP0501 on isa0
Timecounter "tick" frequency 500000000 Hz quality 1000
Event timer "tick" frequency 500000000 Hz quality 1000
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <SUN OHCI root HUB> at usbus0
uhub0: <SUN OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <SUN OHCI root HUB> at usbus1
uhub1: <SUN OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
Trying to mount root from cd9660:/dev/iso9660/12_4_RELEASE_SPARC64_CD [ro]...
Root mount waiting for: usbus0uhub0: 4 ports with 4 removable, self powered
CAM usbus1
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
cd0 at ata2 bus 0 scbus0 target 0 lun 0
cd0: <TEAC CD-224E 1.7A> Removable CD-ROM SCSI device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: 611MB (313112 2048 byte sectors)
ada0 at ata5 bus 0 scbus5 target 0 lun 0
ada0: <Hitachi HDT725032VLA380 V54OA7BA> ATA-7 SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 305245MB (625142448 512 byte sectors)
(cd0:ata2:0:0:0): READ(10). CDB: 28 00 00 04 c7 17 00 00 01 00
(cd0:ata2:0:0:0): CAM status: SCSI Status Error
(cd0:ata2:0:0:0): SCSI status: Check Condition
(cd0:ata2:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:ata2:0:0:0): Info: 0x4c717
(cd0:ata2:0:0:0): Error 5, Unretryable error
(cd0:ata2:0:0:0): cddone: got error 0x5 back
(cd0:ata2:0:0:0): READ(10). CDB: 28 00 00 04 c7 17 00 00 01 00
(cd0:ata2:0:0:0): CAM status: SCSI Status Error
(cd0:ata2:0:0:0): SCSI status: Check Condition
(cd0:ata2:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:ata2:0:0:0): Info: 0x4c717
(cd0:ata2:0:0:0): Error 5, Unretryable error
(cd0:ata2:0:0:0): cddone: got error 0x5 back
(cd0:ata2:0:0:0): READ(10). CDB: 28 00 00 04 c7 17 00 00 01 00
(cd0:ata2:0:0:0): CAM status: SCSI Status Error
(cd0:ata2:0:0:0): SCSI status: Check Condition
(cd0:ata2:0:0:0): SCSI sense: MEDIUM ERROR asc:11,0 (Unrecovered read error)
(cd0:ata2:0:0:0): Info: 0x4c717
(cd0:ata2:0:0:0): Error 5, Unretryable error
(cd0:ata2:0:0:0): cddone: got error 0x5 back
GEOM: ada0: adding VTOC8 information.
GEOM_PART: integrity check failed (ada0, VTOC8)
GEOM: diskid/DISK-VFJ201R80S2YSX: adding VTOC8 information.
GEOM_PART: integrity check failed (diskid/DISK-VFJ201R80S2YSX, VTOC8)
mountroot: waiting for device /dev/iso9660/12_4_RELEASE_SPARC64_CD...
Warning: no time-of-day clock registered, system time will not be set accurately
Starting file system checks:
Generating host.conf.
eval: cannot create /etc/host.conf: Read-only file system
eval: cannot create /etc/host.conf: Read-only file system
eval: cannot create /etc/host.conf: Read-only file system
Mounting local filesystems:.
mdmfs: tmpfs mount exited with error code 1
cp: /var/log/utx.lastlogin: Read-only file system
chmod: /var/log/utx.lastlogin: No such file or directory
cp: /var/log/utx.log: Read-only file system
chmod: /var/log/utx.log: No such file or directory
eval: cannot create /var/run/clean_var: Read-only file system
eval: cannot create /var/spool/lock/clean_var: Read-only file system
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
random: unblocking device.
ldconfig: mkstemp(/var/run/ld-elf.so.hints.VelJLu): Read-only file system
Building /boot/kernel/linker.hints
kldxref: can't create /boot/lhint.eaGoQZ: Read-only file system
/etc/rc: WARNING: $hostname is not set -- see rc.conf(5).
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: dd: /entropy: Read-only file system
dd: /boot/entropy: Read-only file system
.
devmatch: Can't read linker hints file.
lo0: link state changed to UP
Starting Network: lo0 gem0 gem1.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet[_IP_XXXX] netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
gem0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
ether [_MAC_XXXXXXXXXX]
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
gem1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
ether [_MAC_XXXXXXXXXX]
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
Starting devd.
devd: bind: Read-only file system
/etc/rc: WARNING: failed to start devd
add host[_IP_XXXX]: gateway lo0 fib 0: route already in table
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log filesnewsyslog: can't mkstemp logfile /var/log/auth.log.zFicjke: Read-only file system
.
eval: cannot create /var/run/dmesg.boot: Read-only file system
Updating /var/run/os-release install: /var/run/os-release: Read-only file system
done.
Updating motd: /etc/motd is not writable, update failed.
eval: cannot create /var/run/syslogd.sockets: Read-only file system
Starting syslogd.
syslogd: cannot open pid file: Read-only file system
Jan 1 00:02:54 syslogd: /var/log/messages: No such file or directory
Jan 1 00:02:54 syslogd: /var/log/security: No such file or directory
Jan 1 00:02:54 syslogd: /var/log/auth.log: No such file or directory
Jan 1 00:02:54 syslogd: /var/log/maillog: No such file or directory
Jan 1 00:02:54 syslogd: /var/log/cron: No such file or directory
Jan 1 00:02:54 syslogd: /var/log/debug.log: No such file or directory
Jan 1 00:02:54 syslogd: /var/log/xferlog: No such file or directory
Jan 1 00:02:54 syslogd: /var/log/lpd-errs: No such file or directory
Jan 1 00:02:54 syslogd: /var/log/ppp.log: No such file or directory
protect: option requires an argument -- p
usage: protect [-i] command
protect [-cdi] -g pgrp | -p pid
Clearing /tmp (X related).
Mounting late filesystems:.
Starting local daemons:
Welcome to FreeBSD!
Please choose the appropriate terminal type for your system.
Common console types are:
ansi Standard ANSI terminal
vt100 VT100 or compatible terminal
xterm xterm terminal emulator (or compatible)
cons25w cons25w terminal
Console type [vt100]: