Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-05-10 05:17:50
From: yeti
Description: QEMU SPARC UltraSPARC-IIi, NetBSD10.0_BETA
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.0_BETA (GENERIC) #0: Thu May 4 18:57:28 UTC 2023
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC
total memory = 512 MB
avail memory = 480 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
mainbus0 (root): OpenBiosTeam,OpenBIOS: [_HOSTID_XXXXX]
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 100 MHz, CPU id 0
cpu0: manuf 17, impl 12, mask 91
cpu0: 256K instruction (64 b/l), 16K data (32 b/l), 256K external (64 b/l)
psycho0 at mainbus0
psycho0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
pci0 at psycho0
pci0: i/o space, memory space enabled
ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI Bridge (rev. 0x11)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ebus0 at pci1 dev 1 function 0: Sun Microsystems PCIO Ebus2, revision 0x01
clock0 at ebus0 addr 2000-3fff: mk48t59
power at ebus0 addr 7240-7243 ipl 1 not configured
fdthree at ebus0 addr 0-ffffffff not configured
com0 at ebus0 addr 3f8-3ff ipl 2b: ns16550a, 16-byte FIFO
pckbc0 at ebus0 addr 60-67 ipl 29autoconfiguration error: : no intr 1: cnattach ok
pckbd0 at pckbc0 (kbd slot)
wskbd1 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
hme0 at pci1 dev 1 function 1: Sun Happy Meal Ethernet, rev. 0
hme0: interrupting at ivec 3021
hme0: Ethernet address [_MAC_XXXXXXXXXX]
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 100baseTX-FDX, auto
genfb0 at pci1 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02)
genfb0: framebuffer at 0x22000000, size 1024x768, depth 8, stride 1024
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation), using wskbd1
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (default, vt100 emulation)
drm at genfb0 not configured
cmdide0 at pci1 dev 3 function 0: CMD Technology PCI0646 (rev. 0x07)
cmdide0: bus-master DMA support present
cmdide0: primary channel configured to native-PCI mode, channel non-independent
cmdide0: using ivec 1820 for native-PCI interrupt
atabus0 at cmdide0 channel 0
cmdide0: secondary channel configured to native-PCI mode, channel non-independent
atabus1 at cmdide0 channel 1
ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI Bridge (rev. 0x11)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
pcons at mainbus0 not configured
WARNING: system needs entropy for security; see entropy(7)
timecounter: Timecounter "tick-counter" frequency 100000000 Hz quality 100
No counter-timer -- using %tick at 100MHz as system clock.
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <QEMU DVD-ROM, QM00002, 2.5+> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0 at atabus0 drive 0
wd0: <QEMU HARDDISK>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 32768 MB, 66576 cyl, 16 head, 63 sec, 512 bytes/sect x 67108864 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(cmdide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
cd0(cmdide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
atapibus1 at atabus1: 2 targets
cd1 at atapibus1 drive 0: <QEMU DVD-ROM, QM00003, 2.5+> cdrom removable
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd1(cmdide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
swwdog0: software watchdog initialized
WARNING: 1 error while detecting hardware; check system log.
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/sparc64/10.0/modules
entropy: ready
wsdisplay0: screen 4 added (default, vt100 emulation)