Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-05-18 16:03:50
From: dak
Description: NetBSD 9.3 on Yakumo AMD Athlon XP 2200
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020, 2021, 2022 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 9.3 (GENERIC) #0: Thu Aug 4 15:30:37 UTC 2022 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC [ 1.000000] total memory = 223 MB [ 1.000000] avail memory = 199 MB [ 1.000000] rnd: seeded with 256 bits [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.000003] MiTAC (5a) [ 1.000003] mainbus0 (root) [ 1.000003] ACPI: RSDP 0x00000000000E5010 000014 (v00 OID_00) [ 1.000003] ACPI: RSDT 0x000000000DFFFBC0 000030 (v01 INSYDE RSDT_000 00000001 _CSI 00010100) [ 1.000003] ACPI: FACP 0x000000000DFFFAC0 000074 (v01 INSYDE FACP_000 00000100 _CSI 00010100) [ 1.000003] ACPI: DSDT 0x000000000DFFA8A0 005215 (v01 INSYDE VT8372 00001000 INTL 02002025) [ 1.000003] ACPI: FACS 0x000000000DFFFFC0 000040 [ 1.000003] ACPI: BOOT 0x000000000DFFFB50 000028 (v01 INSYDE SYS_BOOT 00000100 _CSI 00010100) [ 1.000003] ACPI: DBGP 0x000000000DFFFB80 000034 (v01 INSYDE DBGP_000 00000100 _CSI 00010100) [ 1.000003] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.000003] cpu0 at mainbus0 [ 1.000003] cpu0: mobile AMD Athlon(tm) XP 2200+, id 0x681 [ 1.000003] cpu0: package 0, core 0, smt 0 [ 1.000003] acpi0 at mainbus0: Intel ACPICA 20190405 [ 1.000003] acpi0: X/RSDT: OemId <INSYDE,RSDT_000,00000001>, AslId <_CSI,00010100> [ 1.000003] LNKC: ACPI: Found matching pin for 0.17.INTC at func 5: 5 [ 1.000003] LNKA: ACPI: Found matching pin for 0.16.INTA at func 0: 10 [ 1.000003] LNKB: ACPI: Found matching pin for 0.16.INTB at func 1: 11 [ 1.000003] LNKD: ACPI: Found matching pin for 0.16.INTD at func 3: 11 [ 1.000003] LNKA: ACPI: Found matching pin for 0.18.INTA at func 0: 10 [ 1.000003] LNKB: ACPI: Found matching pin for 0.9.INTA at func 0: 255 [ 1.000003] LNKC: ACPI: Found matching pin for 0.11.INTA at func 0: 5 [ 1.000003] acpi0: SCI interrupting at int 9 [ 1.000003] acpi0: fixed power button present [ 1.000003] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 [ 1.009308] acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66 [ 1.009308] acpibut0 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button [ 1.009308] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch [ 1.009308] acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter [ 1.009308] acpibat0 at acpi0 (BAT0, PNP0C0A): ACPI Battery [ 1.009308] acpivga0 at acpi0 (VGA): ACPI Display Adapter [ 1.009308] acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Device [ 1.009308] acpiout1 at acpivga0 (CRT, 0x0100): ACPI Display Output Device [ 1.009308] acpivga0: connected output devices: [ 1.009308] acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0, bios detect [ 1.009308] acpivga0: 0x0110 (acpiout0): LCD Panel, head 0, bios detect [ 1.009308] pckbc1 at acpi0 (PS2M, PNP0F03) (aux port): irq 12 [ 1.009308] pckbc2 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64 irq 1 [ 1.009308] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 [ 1.009308] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 [ 1.009308] midi0 at pcppi1: PC speaker [ 1.009308] sysbeep0 at pcppi1 [ 1.009308] MEM (PNP0C01) at acpi0 not configured [ 1.009308] PNP (PNP0C02) at acpi0 not configured [ 1.009308] COPR (PNP0C04) at acpi0 not configured [ 1.009308] ECP (PNP0401) at acpi0 not configured [ 1.009308] FIR (VIA3076) at acpi0 not configured [ 1.009308] acpifan0 at acpi0 (FAN0, PNP0C0B-1): ACPI Fan [ 1.009308] acpitz0 at acpi0 (THRM) [ 1.009308] acpitz0: active cooling level 0: 70.0C [ 1.009308] acpitz0: levels: critical 101.0 C, passive 95.0 C [ 1.009308] apm0 at acpi0: Power Management spec V1.2 [ 1.009308] pckbd0 at pckbc2 (kbd slot) [ 1.009308] pckbc2: using irq 1 for kbd slot [ 1.009308] wskbd0 at pckbd0: console keyboard [ 1.009308] pms0 at pckbc2 (aux slot) [ 1.009308] pms0: Synaptics touchpad version 5.1 [ 1.009308] pms0: Buttons 4/5, Palm detect, Multi-finger [ 1.009308] pckbc2: using irq 12 for aux slot [ 1.009308] wsmouse0 at pms0 mux 0 [ 1.009308] attimer1: attached to pcppi1 [ 1.009308] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.009308] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.009308] pchb0 at pci0 dev 0 function 0: vendor 1106 product 3156 (rev. 0x00) [ 1.009308] agp0 at pchb0: aperture at 0xa0000000, size 0x4000000 [ 1.009308] ppb0 at pci0 dev 1 function 0: vendor 1106 product b091 (rev. 0x00) [ 1.009308] pci1 at ppb0 bus 1 [ 1.009308] pci1: i/o space, memory space enabled [ 1.009308] vga0 at pci1 dev 0 function 0: vendor 5333 product 8d04 (rev. 0x00) [ 1.009308] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 [ 1.009308] wsmux1: connecting to wsdisplay0 [ 1.009308] drm at vga0 not configured [ 1.009308] cbb0 at pci0 dev 9 function 0: vendor 1524 product 1410 (rev. 0x00) [ 1.009308] fwohci0 at pci0 dev 11 function 0: vendor 1106 product 3044 (rev. 0x80) [ 1.009308] fwohci0: interrupting at irq 5 [ 1.009308] fwohci0: OHCI version 1.0 (ROM=1) [ 1.009308] fwohci0: No. of Isochronous channels is 4. [ 1.009308] fwohci0: EUI64 [_MAC_XXXXXXXXXX]:96:6a [ 1.009308] fwohci0: Phy 1394a available S400, 2 ports. [ 1.009308] fwohci0: Link S400, max_rec 2048 bytes. [ 1.009308] ieee1394if0 at fwohci0: IEEE1394 bus [ 1.009308] fwip0 at ieee1394if0: IP over IEEE1394 [ 1.009308] fwohci0: Initiate bus reset [ 1.009308] uhci0 at pci0 dev 16 function 0: vendor 1106 product 3038 (rev. 0x80) [ 1.009308] uhci0: interrupting at irq 10 [ 1.009308] usb0 at uhci0: USB revision 1.0 [ 1.009308] uhci1 at pci0 dev 16 function 1: vendor 1106 product 3038 (rev. 0x80) [ 1.009308] uhci1: interrupting at irq 11 [ 1.009308] usb1 at uhci1: USB revision 1.0 [ 1.009308] ehci0 at pci0 dev 16 function 3: vendor 1106 product 3104 (rev. 0x82) [ 1.009308] ehci0: interrupting at irq 11 [ 1.009308] ehci0: dropped intr workaround enabled [ 1.009308] ehci0: EHCI version 1.0 [ 1.009308] ehci0: 2 companion controllers, 2 ports each: uhci0 uhci1 [ 1.009308] usb2 at ehci0: USB revision 2.0 [ 1.009308] viapcib0 at pci0 dev 17 function 0: vendor 1106 product 3177 (rev. 0x00) [ 1.009308] viapcib0: SMBus found at 0x1400 (revision 0x0) [ 1.009308] iic0 at viapcib0: I2C bus [ 1.009308] viaide0 at pci0 dev 17 function 1 [ 1.009308] viaide0: VIA Technologies VT8235 ATA133 controller [ 1.009308] viaide0: bus-master DMA support present [ 1.009308] viaide0: primary channel configured to compatibility mode [ 1.009308] viaide0: primary channel interrupting at irq 14 [ 1.009308] atabus0 at viaide0 channel 0 [ 1.009308] viaide0: secondary channel configured to compatibility mode [ 1.009308] viaide0: secondary channel interrupting at irq 15 [ 1.009308] atabus1 at viaide0 channel 1 [ 1.009308] auvia0 at pci0 dev 17 function 5: VIA Technologies VT8235 AC'97 Audio (rev 0x50) [ 1.009308] auvia0: interrupting at irq 5 [ 1.009308] auvia0: ac97: VIA Technologies VT1612A codec; headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D [ 1.009308] auvia0: ac97: ext id 0x205<AMAP,SPDIF,VRA> [ 1.009308] audio0 at auvia0: playback, capture, full duplex, independent [ 1.009308] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback [ 1.009308] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording [ 1.009308] vendor 1106 product 3068 (miscellaneous communications, revision 0x80) at pci0 dev 17 function 6 not configured [ 1.009308] vr0 at pci0 dev 18 function 0: vendor 1106 product 3065 (rev. 0x74) [ 1.009308] vr0: interrupting at irq 10 [ 1.009308] vr0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.009308] ukphy0 at vr0 phy 1: OUI 0x0002c6, model 0x0032, rev. 5 [ 1.009308] ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.009308] vr0: Clear PME# now [ 1.009308] cbb0: cacheline 0x8 lattimer 0xc0 [ 1.009308] cbb0: bhlc 0x2c008 [ 1.009308] cbb0: autoconfiguration error: secondary bus number uninitialized; try PCI_BUS_FIXUP [ 1.009308] cbb0: interrupting at irq 11 [ 1.009308] cardslot0 at cbb0 [ 1.009308] pcmcia0 at cardslot0 [ 1.009308] isa0 at viapcib0 [ 1.009308] lpt0 at isa0 port 0x378-0x37b irq 7 [ 1.009308] isapnp0 at isa0 port 0x279 [ 1.009308] isapnp0: no ISA Plug 'n Play devices found [ 1.009308] powernow0 at cpu0: failed to initialize (err 6) [ 1.009308] fwohci0: BUS reset [ 1.009308] fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode [ 1.009308] ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) [ 1.009308] ieee1394if0: bus manager 0 [ 1.009308] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 2.007894] IPsec: Initialized Security Association Processing. [ 2.017898] acpiacad0: AC adapter online. [ 2.027895] uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 2.027895] uhub0: 2 ports with 2 removable, self powered [ 2.027895] uhub1 at usb1: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 2.027895] uhub1: 2 ports with 2 removable, self powered [ 2.027895] uhub2 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 [ 2.027895] uhub2: 4 ports with 4 removable, self powered [ 5.077937] wd0 at atabus0 drive 0 [ 5.077937] wd0: <FUJITSU MHV2040AT> [ 5.077937] wd0: drive supports 16-sector PIO transfers, LBA addressing [ 5.077937] wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors [ 5.527945] wd0: 32-bit data port [ 5.527945] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) [ 5.537945] wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) [ 5.537945] atapibus0 at atabus1: 2 targets [ 5.547947] cd0 at atapibus0 drive 1: <HL-DT-ST DVDRAM GSA-T20N, KXG796B1812, WH01> cdrom removable [ 5.557946] cd0: 32-bit data port [ 5.557946] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) [ 5.567946] cd0(viaide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) [ 5.657947] WARNING: 1 error while detecting hardware; check system log. [ 5.657947] boot device: wd0 [ 5.657947] root on wd0a dumps on wd0b [ 5.667947] root file system type: ffs [ 5.667947] kern.module.path=/stand/i386/9.3/modules [ 5.677971] WARNING: clock gained 72 days [ 16.038106] wsdisplay0: screen 1 added (80x25, vt100 emulation) [ 16.048114] wsdisplay0: screen 2 added (80x25, vt100 emulation) [ 16.048114] wsdisplay0: screen 3 added (80x25, vt100 emulation) [ 16.048114] wsdisplay0: screen 4 added (80x25, vt100 emulation) [ 122.009735] umass0 at uhub2 port 3 configuration 1 interface 0 [ 122.009735] umass0: USBest Technology (0x1307) USB Mass Storage Device (0x163), rev 2.00/1.00, addr 2 [ 122.009735] umass0: using SCSI over Bulk-Only [ 122.009735] scsibus0 at umass0: 2 targets, 1 lun per target [ 122.009735] sd0 at scsibus0 target 0 lun 0: <Ut163, USB2FlashStorage, 0.00> disk removable [ 122.009735] sd0: 963 MB, 500 cyl, 8 head, 32 sec, 512 bytes/sect x 1974271 sectors