Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-06-17 12:04:06
From: rin
Description: NetBSD/evbarm (earmv5eb) 10.99.4 on NSLU2 inherited from ryo@n
+Ethernet eth0: MAC address [_MAC_XXXXXXXXXX] IP:[_IP_XXXXXX]/255.255.255.0, Gateway:[_IP_XXXXXX] Default server:[_IP_XX], DNS server IP:[_IP_XX] RedBoot(tm) bootstrap and debug environment [ROMRAM] Red Hat certified release, version 1.92 - built 15:16:07, Feb 3 2004 Platform: IXDP425 Development Platform (XScale) Copyright (C) 2000, 2001, 2002, Red Hat, Inc. RAM: 0x00000000-0x02000000, 0x000723a0-0x01ff3000 available FLASH: 0x50000000 - 0x50800000, 64 blocks of 0x00020000 bytes each. == Executing boot script in 2.000 seconds - enter ^C to abort ^C RedBoot> ip_addr -h[_IP_XXXXXX] IP:[_IP_XXXXXX]/255.255.255.0, Gateway:[_IP_XXXXXX] Default server:[_IP_XXXXXX], DNS server IP:[_IP_XX] RedBoot> ip_addr -l[_IP_XXXXXX] IP:[_IP_XXXXXX]/255.255.255.0, Gateway:[_IP_XXXXXX] Default server:[_IP_XXXXXX], DNS server IP:[_IP_XX] RedBoot> load -r -b 0x200000 nslu2.bin Using default protocol (TFTP) Raw file loaded 0x00200000-0x0056f193, assumed entry at 0x00200000 RedBoot> go [ 1.0000000] NetBSD/evbarm (Linksys NSLU2) booting ... [ 1.0000000] kernsize=0x389568 [ 1.0000000] physmemory: 8192 pages at 0x10000000 -> 0x11ffffff [ 1.0000000] Allocating page tables [ 1.0000000] physical_start = 0x10000000, physical_end = 0x12000000 [ 1.0000000] IRQ stack: p0x1000f000 v0xc000f000 [ 1.0000000] ABT stack: p0x10010000 v0xc0010000 [ 1.0000000] UND stack: p0x10011000 v0xc0011000 [ 1.0000000] SVC stack: p0x10012000 v0xc0012000 [ 1.0000000] Creating L1 page table at 0x10000000 [ 1.0000000] Mapping kernel [ 1.0000000] SSLLLLLLLLLLLLLPPPPPPPPPP [ 1.0000000] PPPPPPLLLLLLLLLLPPPPPPPPPP [ 1.0000000] Constructing L2 page tables [ 1.0000000] P [ 1.0000000] P [ 1.0000000] P [ 1.0000000] PP [ 1.0000000] PPPP [ 1.0000000] P [ 1.0000000] P [ 1.0000000] P [ 1.0000000] P [ 1.0000000] P [ 1.0000000] P [ 1.0000000] P [ 1.0000000] P [ 1.0000000] P [ 1.0000000] P [ 1.0000000] S [ 1.0000000] S [ 1.0000000] freestart = 0x1058a000, free_pages = 6774 (0x1a76) [ 1.0000000] switching to new L1 page table @0x10000000...bootstrap done. [ 1.0000000] init subsystems: stacks vectors undefined page pmap kpm locks l1pt cache(l1pt) specials pools irq [ 1.0000000] All initialization done! [ 1.0000000] Now Starting NetBSD, Here we go! [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.4 (NSLU2.rin) #0: Sat Jun 17 13:16:18 JST 2023 [ 1.0000000] rin@latipes:/home/rin/repos/src/sys/arch/evbarm/compile/NSLU2.rin [ 1.0000000] total memory = 32768 KB [ 1.0000000] avail memory = 26292 KB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0 core 0: IXP425 266MHz rev 1 (XScale V5TE core) [ 1.0000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.0000000] cpu0: L1 32KB/32B 32-way (32 set) VIVT Instruction cache [ 1.0000000] cpu0: L1 32KB/32B 32-way (32 set) write-back-locking VIVT Data cache [ 1.0000000] ixpsip0 at mainbus0 [ 1.0000000] com0 at ixpsip0 addr 0xc8000000-0xc8000fff: ns16550a, 16-byte FIFO [ 1.0000000] com0: console [ 1.0000000] ixpclk0 at ixpsip0 addr 0xc8005000-0xc800502f [ 1.0000000] ixpclk0: IXP425 Interval Timer [ 1.0000000] ixpdog0 at ixpsip0: Watchdog Timer [ 1.0000000] slugiic0 at ixpsip0: I2C bus [ 1.0000000] slugbutt0 at ixpsip0: Power and Reset buttons [ 1.0000000] slugled0 at ixpsip0: LED support [ 1.0000000] ixpio0 at mainbus0 [ 1.0000000] ixpio0: configuring PCI bus [ 1.0000000] pci0 at ixpio0 bus 0 [ 1.0000000] ohci0 at pci0 dev 1 function 0: vendor 1033 product 0035 (rev. 0x43) [ 1.0000000] ohci0: interrupting at PCIA [ 1.0000000] ohci0: OHCI version 1.0 [ 1.0000000] usb0 at ohci0: USB revision 1.0 [ 1.0000000] ohci1 at pci0 dev 1 function 1: vendor 1033 product 0035 (rev. 0x43) [ 1.0000000] ohci1: interrupting at PCIB [ 1.0000000] ohci1: OHCI version 1.0 [ 1.0000000] usb1 at ohci1: USB revision 1.0 [ 1.0000000] ehci0 at pci0 dev 1 function 2: vendor 1033 product 00e0 (rev. 0x04) [ 1.0000000] ehci0: interrupting at PCIC [ 1.0000000] ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1 [ 1.0000000] usb2 at ehci0: USB revision 2.0 [ 1.0000000] ixme0 at mainbus0: IXP4xx MicroEngine Support [ 1.0000000] ixpnpe0 at ixme0 NPE-B [ 1.0000000] npe0 at ixpnpe0: Ethernet co-processor [ 1.0000000] npe0: remember to fix rx q setup [ 1.0000000] npe0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] rlphy0 at npe0 phy 1: RTL8201L 10/100 media interface, rev. 1 [ 1.0000000] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0000000] clock: hz=100 stathz=0 profhz=0 [ 1.0000030] iic0 at slugiic0: I2C bus [ 1.0000030] xrtc0 at iic0 addr 0x6f: Xicor X1226 Real-time Clock/NVRAM [ 1.0198650] WARNING: system needs entropy for security; see entropy(7) [ 1.0398523] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.0498347] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.0598673] uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 2.1198140] umass0 at uhub2 port 2 configuration 1 interface 0 [ 2.1299210] umass0: SanDisk (0x0781) Ultra (0x5581), rev 2.10/1.00, addr 2 [ 2.1398959] scsibus0 at umass0: 2 targets, 1 lun per target [ 2.1498508] sd0 at scsibus0 target 0 lun 0: <SanDisk, Ultra, 1.00> disk removable [ 2.1598903] sd0: 14663 MB, 29792 cyl, 16 head, 63 sec, 512 bytes/sect x 30031250 sectors [ 2.1698524] boot device: <unknown> [ 2.1798945] root on sd0a dumps on sd0b [ 2.2098667] kern.module.path=/stand/evbarm/10.99.4/modules