Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2023-06-17 15:08:03
From: tsutsui
Description: NetBSD/evbarm 9.3 (earmv5) on SheevaPlug
U-Boot 2011.12 (Mar 11 2012 - 18:59:46) Marvell-Sheevaplug - eSATA - SD/MMC SoC: Kirkwood 88F6281_A1 DRAM: 512 MiB WARNING: Caches not enabled NAND: 512 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 SDHC found. Card desciption is: Manufacturer: 0x27, OEM "PH" Product name: "SD32G", revision 3.0 Serial number: 31583219 Manufacturing date: 7/2019 CRC: 0x00, b0 = 0 mmc1 is available SDHC found. Card desciption is: Manufacturer: 0x27, OEM "PH" Product name: "SD32G", revision 3.0 Serial number: 31583219 Manufacturing date: 7/2019 CRC: 0x00, b0 = 0 mmc1 is available Loading file "/uImage" from mmc device 0:1 (xxa1) Failed to mount ext2 filesystem... ** Bad ext2 partition or disk - mmc 0:1 ** Loading file "/uInitrd" from mmc device 0:1 (xxa1) Failed to mount ext2 filesystem... ** Bad ext2 partition or disk - mmc 0:1 ** Wrong Image Format for bootm command ERROR: can't get kernel image! Marvell>> bootp BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address[_IP_XXXXXXXX] *** Warning: no boot file name; using 'C0A81450.img' Using egiga0 device TFTP from server[_IP_XXXXXXX]; our IP address is[_IP_XXXXXXXX] Filename 'C0A81450.img'. Load address: 0x800000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################ done Bytes transferred = 6658516 (6599d4 hex) Marvell>> bootm 0x800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: NetBSD/sheevaplug 9.3 Image Type: ARM NetBSD Kernel Image (uncompressed) Data Size: 6658452 Bytes = 6.3 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK ## Transferring control to NetBSD stage-2 loader (at address 00008000) ... [ 1.0000000] NetBSD/evbarm (sheevaplug) booting ... [ 1.0000000] [ Kernel symbol table missing! ] [ 1.0000000] Loaded initial symtab at 0xc0578c84, strtab at 0xc05bf964, # entries 18109 [ 1.0000000] pmap_postinit: Allocated 35 static L1 descriptor tables [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019, 2020, 2021, 2022 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 9.3 (SHEEVAPLUG) #0: Thu Aug 4 15:30:37 UTC 2022 [ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/SHEEVAPLUG [ 1.0000000] total memory = 512 MB [ 1.0000000] avail memory = 494 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0 core 0: Sheeva 88SV131 rev 1 (ARM9E-S V5TE core) [ 1.0000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.0000000] cpu0: 16KB/32B 4-way L1 VIVT Instruction cache [ 1.0000000] cpu0: 16KB/32B 4-way write-back-locking-C L1 VIVT Data cache [ 1.0000000] mvsoc0 at mainbus0: Marvell 88F6281 Rev. A1 Kirkwood [ 1.0000000] mvsoc0: CPU Clock 1200.000 MHz SysClock 400.000 MHz TClock 200.000 MHz [ 1.0000000] mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff irq 65: Marvell SoC Timer [ 1.0000000] mvsocgpp0 at mvsoc0 unit 0 offset 0x10100-0x101ff irq 35: Marvell SoC General Purpose I/O Port Interface [ 1.0000000] mvsocgpp0: 50 gpio pins [ 1.0000000] mvsocgpp0: interrupts 96..103, intr 35 [ 1.0000000] mvsocgpp0: interrupts 104..111, intr 36 [ 1.0000000] mvsocgpp0: interrupts 112..119, intr 37 [ 1.0000000] mvsocgpp0: interrupts 120..127, intr 38 [ 1.0000000] mvsocgpp0: interrupts 128..135, intr 39 [ 1.0000000] mvsocgpp0: interrupts 136..143, intr 40 [ 1.0000000] mvsocgpp0: interrupts 144..151, intr 41 [ 1.0000000] mvsocgpp0: Data Out: 0x20000000 [ 1.0000000] mvsocgpp0: Data Out Enable Control: 0xffffffff [ 1.0000000] mvsocgpp0: Data Blink Enable: 0x00000000 [ 1.0000000] mvsocgpp0: Data In Polarity: 0x00000000 [ 1.0000000] mvsocgpp0: Data In: 0x00000080 [ 1.0000000] mvsocgpp0: Interrupt Cause: 0x00000000 [ 1.0000000] mvsocgpp0: Interrupt Mask: 0x00000000 [ 1.0000000] mvsocgpp0: Interrupt Level Mask: 0x00000000 [ 1.0000000] mvsocgpp0: High Data Out: 0x00020000 [ 1.0000000] mvsocgpp0: High Data Out Enable Ctrl: 0xffffffff [ 1.0000000] mvsocgpp0: High Blink Enable: 0x00000000 [ 1.0000000] mvsocgpp0: High Data In Polarity: 0x00000000 [ 1.0000000] mvsocgpp0: High Data In: 0x00014000 [ 1.0000000] mvsocgpp0: High Interrupt Cause: 0x00000000 [ 1.0000000] mvsocgpp0: High Interrupt Mask: 0x00000000 [ 1.0000000] mvsocgpp0: High Interrupt Level Mask: 0x00000000 [ 1.0000000] gpio0 at mvsocgpp0: 50 pins [ 1.0000000] mvsocrtc0 at mvsoc0 unit 0 offset 0x10300-0x10317: Marvell SoC Real Time Clock [ 1.0000000] com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 33: ns16550a, working fifo [ 1.0000000] com0: console [ 1.0000000] com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 34: ns16550a, working fifo [ 1.0000000] ehci0 at mvsoc0 unit 0 offset 0x50000-0x50fff irq 19: Marvell USB 2.0 Interface [ 1.0000000] usb0 at ehci0: USB revision 2.0 [ 1.0000000] gtidmac0 at mvsoc0 unit 0 offset 0x60000-0x60fff: Marvell IDMA Controller/XOR Engine [ 1.0000000] gtidmac0: XOR Engine 4 channels, intr 5, 6, 7, 8 [ 1.0000000] gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x110ff irq 29: Marvell TWSI controller [ 1.0000000] iic0 at gttwsi0: I2C bus [ 1.0000000] mvcesa0 at mvsoc0 unit 0 offset 0x3d000-0x3dfff irq 22: Marvell Cryptographic Engines and Security Accelerator [ 1.0000000] mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit Ethernet Controller [ 1.0000000] mvgbe0 at mvgbec0 port 0 irq 11 [ 1.0000000] mvgbe0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] makphy0 at mvgbe0 phy 0: Marvell 88E1318S Gigabit PHY, rev. 0 [ 1.0000000] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000000] mvgbec1 at mvsoc0 unit 1 offset 0x74000-0x77fff: Marvell Gigabit Ethernet Controller [ 1.0000000] mvgbe at mvgbec1 port 0 not configured [ 1.0000000] mvpex0 at mvsoc0 unit 0 offset 0x40000-0x41fff irq 9: Marvell PCI Express Interface [ 1.0000000] pci0 at mvpex0 [ 1.0000000] vendor 11ab product 6281 (miscellaneous memory, revision 0x03) at pci0 dev 0 function 0 not configured [ 1.0000000] mvsata0 at mvsoc0 unit 0 offset 0x80000-0x87fff irq 21: Marvell Serial-ATA Host Controller (SATAHC) [ 1.0000000] mvsata0: GenIIe, 1hc, 2port/hc [ 1.0000000] atabus0 at mvsata0 channel 0 [ 1.0000000] atabus1 at mvsata0 channel 1 [ 1.0000000] mvsdio0 at mvsoc0 unit 0 offset 0x90000-0x9ffff irq 28: Marvell Secure Digital Input/Output Interface [ 1.0000000] sdmmc0 at mvsdio0 [ 1.0399708] uhub0 at usb0: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.1199688] sdmmc0: SD card status: 4-bit, C10, U1 [ 1.1199688] ld0 at sdmmc0: <0x27:0x5048:SD32G:0x30:0x01e1ebf3:0x04d> [ 1.1199688] ld0: 29664 MB, 7533 cyl, 128 head, 63 sec, 512 bytes/sect x 60751872 sectors [ 1.1199688] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz [ 2.1399681] boot device: <unknown> [ 2.1399681] root device: mvgbe0 [ 2.1399681] dump device: [ 2.1399681] file system (default generic): [ 2.1399681] root on mvgbe0 [ 2.1399681] mountroot: trying ffs... [ 2.1399681] mountroot: trying ext2fs... [ 2.1399681] mountroot: trying nfs... [ 2.7931876] nfs_boot: trying DHCP/BOOTP [ 3.3399721] mvgbe0: link state DOWN (was UNKNOWN) [ 5.2399723] mvgbe0: link state UP (was DOWN) [ 6.3399729] nfs_boot: DHCP next-server:[_IP_XXXXXXX] [ 6.3399729] nfs_boot: my_domain=ceres.dti.ne.jp [ 6.3399729] nfs_boot: my_addr=192.168.20.80 [ 6.3399729] nfs_boot: my_mask=255.255.255.0 [ 6.3399729] nfs_boot: gateway=192.168.20.1 [ 18.3599808] root on mirage:/r/export/NetBSD/evbarm/root [ 18.3599808] root time: 0x648dcb30 [ 18.3599808] root file system type: nfs [ 18.3599808] kern.module.path=/stand/evbarm/9.3/modules [ 18.3599808] WARNING: clock lost 8568 days [ 18.3599808] WARNING: using filesystem time [ 18.3888656] WARNING: CHECK AND RESET THE DATE! [ 18.3888656] init path (default /sbin/init): [ 18.3888656] init: copying out path `/sbin/init' 11 /etc/rc.conf is not configured. Multiuser boot aborted. Enter pathname of shell or RETURN for /bin/sh: We recommend that you create a non-root account and use su(1) for root access. #