Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-06-19 15:18:33
From: tsutsui
Description: NetBSD/evbarm 10.0_BETA (earmv5) on HP T5325
_ _ .____
| |_| | | _ \
| _ | | (_))
| |-| | | |
|_| |_| |_| ..
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__|
** LOADER **
** BOARD: DB-88F6281A-BP LE
U-Boot 1.1.4 (Jan 8 2010 - 14:03:56) MIC version : 3.4.19-16
U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CD4E0
Soc: 88F6281 A1 (DDR2)
CPU running @ 1200Mhz L2 running @ 400Mhz
SysClock = 400Mhz , TClock = 200Mhz
DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000 size 256MB
DRAM CS[1] base 0x10000000 size 256MB
DRAM Total size 512MB 16bit width
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
[1024kB@f8000000] Flash: 1 MB
CPU : Marvell Feroceon (Rev 1)
Streaming disabled
Write allocate disabled
USB 0: host mode
PEX 0: PCI Express Root Complex Interface
PEX interface detected Link X1
Net: egiga0 [PRIME], egiga1
Hit any key to stop autoboot: 0
HP>> usb start; fatload usb 0 0x2000000 netbsd.ub; bootm 0x2000000
(Re)start USB...
USB: scanning bus for devices... 3 USB Device(s) found
Waiting for storage device(s) to settle before scanning...
1 Storage Device(s) found
reading netbsd.ub
............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
5204116 bytes read
## Booting image at 02000000 ...
Image Name: NetBSD/hpt5325 10.0_BETA
Created: 2023-06-17 19:34:03 UTC
Image Type: ARM NetBSD Kernel Image (uncompressed)
Data Size: 5204052 Bytes = 5 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
## Transferring control to NetBSD stage-2 loader (at address 00008000) ...
[ 1.0000000] NetBSD/evbarm (hpt5325) booting ...
[ 1.0000000] [ Kernel symbol table missing! ]
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 10.0_BETA (HPT5325) #8: Sun Jun 18 04:33:55 JST 2023
[ 1.0000000] tsutsui@mirage:/s/netbsd-10/src/sys/arch/evbarm/compile/HPT5325
[ 1.0000000] total memory = 512 MB
[ 1.0000000] avail memory = 496 MB
[ 1.0000000] mainbus0 (root)
[ 1.0000000] cpu0 at mainbus0 core 0: Sheeva 88SV131 rev 1 (ARM9E-S V5TE core)
[ 1.0000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
[ 1.0000000] cpu0: L1 16KB/32B 4-way (128 set) VIVT Instruction cache
[ 1.0000000] cpu0: L1 16KB/32B 4-way (128 set) write-back-locking-C VIVT Data cache
[ 1.0000000] mvsoc0 at mainbus0: Marvell 88F6281 Rev. A1 Kirkwood
[ 1.0000000] mvsoc0: CPU Clock 1200.000 MHz SysClock 400.000 MHz TClock 200.000 MHz
[ 1.0000000] mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff irq 65: Marvell SoC Timer
[ 1.0000000] mvsocgpp at mvsoc0 unit 0 not configured
[ 1.0000000] mvsocrtc0 at mvsoc0 unit 0 offset 0x10300-0x10317: Marvell SoC Real Time Clock
[ 1.0000000] com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 33: ns16550a, 16-byte FIFO
[ 1.0000000] com0: console
[ 1.0000000] com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 34: ns16550a, 16-byte FIFO
[ 1.0000000] ehci0 at mvsoc0 unit 0 offset 0x50000-0x50fff irq 19: Marvell USB 2.0 Interface
[ 1.0000000] usb0 at ehci0: USB revision 2.0
[ 1.0000000] gtidmac at mvsoc0 unit 0 not configured
[ 1.0000000] gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x110ff irq 29: Marvell TWSI controller
[ 1.0000000] iic0 at gttwsi0: I2C bus
[ 1.0000000] mvcesa at mvsoc0 unit 0 not configured
[ 1.0000000] mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit Ethernet Controller
[ 1.0000000] mvgbe0 at mvgbec0 port 0 irq 11
[ 1.0000000] mvgbe0: Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] makphy0 at mvgbe0 phy 8: Marvell 88E1118 Gigabit PHY, rev. 0
[ 1.0000000] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[ 1.0000000] mvgbec1 at mvsoc0 unit 1 offset 0x74000-0x77fff: Marvell Gigabit Ethernet Controller
[ 1.0000000] mvgbe at mvgbec1 port 0 not configured
[ 1.0000000] mvpex0 at mvsoc0 unit 0 offset 0x40000-0x41fff irq 9: Marvell PCI Express Interface
[ 1.0000000] PCI: bus 0, device 1, function 0: Failed to allocate PCI memory space (67108864 req, prefetch=1 ok64=0)
[ 1.0000000] PCI bus configuration failed: unable to assign all I/O and memory ranges.
[ 1.0000000] pci0 at mvpex0
[ 1.0000000] vendor 11ab product 6281 (miscellaneous memory, revision 0x03) at pci0 dev 0 function 0 not configured
[ 1.0000000] vendor 18ca product 0027 (VGA display) at pci0 dev 1 function 0 not configured
[ 1.0000000] mvsata0 at mvsoc0 unit 0 offset 0x80000-0x87fff irq 21: Marvell Serial-ATA Host Controller (SATAHC)
[ 1.0000000] mvsata0: GenIIe, 1hc, 2port/hc
[ 1.0000000] atabus0 at mvsata0 channel 0
[ 1.0000000] atabus1 at mvsata0 channel 1
[ 1.0000000] mvsdio at mvsoc0 unit 0 not configured
[ 1.0000030] WARNING: system needs entropy for security; see entropy(7)
[ 1.0199759] uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.1099596] mvsata0 port 0: device present, speed: 3.0Gb/s
[ 1.1099596] wd0 at atabus0 drive 0
[ 1.1099596] wd0: <SM224>
[ 1.1099596] wd0: 463 MB, 942 cyl, 16 head, 63 sec, 512 bytes/sect x 949536 sectors
[ 2.0599681] uhub1 at uhub0 port 1: SMSC (0x0424) USB 2.0 4-Port Hub (0x2514), class 9/0, rev 2.00/0.00, addr 2
[ 2.0599681] uhub1: multiple transaction translators
[ 2.8999630] umass0 at uhub1 port 4 configuration 1 interface 0
[ 2.8999630] umass0: JMicron (0x152d) USB to ATA/ATAPI Bridge (0x2338), rev 2.00/1.00, addr 3
[ 2.8999630] scsibus0 at umass0: 2 targets, 1 lun per target
[ 2.8999630] sd0 at scsibus0 target 0 lun 0: <SUNEAST, SSD SE800 mSATA, 7B0> disk fixed
[ 2.9399717] sd0: 238 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 500118192 sectors
[ 2.9399717] boot device: <unknown>
[ 2.9399717] root device: sd0
[ 2.9399717] dump device (default sd0b):
[ 2.9399717] file system (default generic):
[ 2.9399717] root on sd0a dumps on sd0b
[ 3.3499718] root file system type: ffs
[ 3.3599748] kern.module.path=/stand/evbarm/10.0/modules
[ 3.3699745] init path (default /sbin/init):
[ 3.3699745] init: trying /sbin/init