Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-06-29 00:49:26
From: Nishi
Description: Fujitsu FMVKJ2ZEN1 running NetBSD/amd64 10.0_BETA
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.0_BETA (GENERIC) #0: Mon Jan 23 16:02:49 UTC 2023
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 8087 MB
avail memory = 7795 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa da422f18
mainbus0 (root)
ACPI: RSDP 0x00000000DA1AE000 000024 (v02 FUJ )
ACPI: XSDT 0x00000000DA1AE080 000084 (v01 FUJ PC 11300000 AMI 00010013)
ACPI: FACP 0x00000000DA1B9190 0000F4 (v04 FUJ PC 11300000 AMI 00010013)
ACPI: DSDT 0x00000000DA1AE198 00AFF4 (v02 FUJ KEJ 11300000 INTL 20051117)
ACPI: FACS 0x00000000DA32FF80 000040
ACPI: APIC 0x00000000DA1B9288 000072 (v03 FUJ KEJ 11300000 AMI 00010013)
ACPI: FPDT 0x00000000DA1B9300 000044 (v01 FUJ KEJ 11300000 AMI 00010013)
ACPI: ASF! 0x00000000DA1B9348 0000A5 (v32 FUJ KEJ 11300000 TFSM 000F4240)
ACPI: MCFG 0x00000000DA1B93F0 00003C (v01 FUJ KEJ 11300000 MSFT 00000097)
ACPI: BOOT 0x00000000DA1B9430 000028 (v01 FUJ KEJ 11300000 AMI 00010013)
ACPI: HPET 0x00000000DA1B9458 000038 (v01 FUJ KEJ 11300000 AMI. 00000005)
ACPI: SSDT 0x00000000DA1B9490 000315 (v02 FUJ KEJ 11300000 INTL 20091112)
ACPI: SLIC 0x00000000DA1B97A8 000176 (v01 FUJ PC 11300000 AMI 00010013)
ACPI: SSDT 0x00000000DA1B9920 0009AA (v02 FUJ KEJ 11300000 INTL 20051117)
ACPI: SSDT 0x00000000DA1BA2D0 000A92 (v02 FUJ KEJ 11300000 INTL 20051117)
ACPI: DMAR 0x00000000DA1BAD68 0000B8 (v01 FUJ KEJ 11300000 INTL 00000001)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use lfence to serialize rdtsc
cpu0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, id 0x206a7
cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, id 0x206a7
cpu1: node 0, package 0, core 1, smt 0
cpu2 at mainbus0 apid 1
cpu2: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, id 0x206a7
cpu2: node 0, package 0, core 0, smt 1
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, id 0x206a7
cpu3: node 0, package 0, core 1, smt 1
acpi0 at mainbus0: Intel ACPICA 20221020
acpi0: X/RSDT: OemId <FUJ ,PC ,11300000>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8170F1F2B008 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF817200542488 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8170F1EE71C8 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1): not present
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
fujbp0 at acpi0 (FJEX, FUJ02B1): Fujitsu Brightness & Pointer
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: [1,10,19,28,37,46,55,64,73,82,91,100]
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
MEM2 (PNP0C01) at acpi0 not configured
fujhk0 at acpi0 (FEXT, FUJ02E3): Fujitsu Hotkeys
ACPI: Enabled 9 GPEs in block 00 to 3F
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel Sandy Bridge (mobile) Host Bridge (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: Intel Sandy Bridge (mobile) GT2+ Integrated Graphics Device (rev. 0x09)
xhci0 at pci0 dev 20 function 0: Intel 7 Series USB xHCI (rev. 0x04)
xhci0: 64-bit DMA
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
Intel 7 Series MEI Controller (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: Intel 7 Series USB EHCI (rev. 0x04)
ehci0: 64-bit DMA
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: Using DMA subregion for control data structures
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi1 vec 0
hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: Realtek ALC269
hdafg0: DAC00 2ch: Speaker [Jack]
hdafg0: DAC01 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC02 2ch: Line In [Jack]
hdafg0: ADC03 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
ppb0 at pci0 dev 28 function 0: Intel 7 Series PCIe (rev. 0xc4)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: Intel 7 Series PCIe (rev. 0xc4)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x07)
re0: interrupting at msix2 vec 0
re0: RTL8168E/8111E-VL (0x2c80)
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8211E 1000BASE-T media interface
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci1 at pci0 dev 29 function 0: Intel 7 Series USB EHCI (rev. 0x04)
ehci1: 64-bit DMA
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: Using DMA subregion for control data structures
usb3 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: Intel Mobile HM76 LPC (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: Intel 7 Series (mobile) SATA Controller (AHCI) (rev. 0x04)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc720ff45<EMS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SNCQ,S64A>
ahcisata0: interrupting at msi3 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 4
ichsmb0 at pci0 dev 31 function 3: Intel 7 Series SMBus Controller (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
wsbell at spkr1 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 104 us, pow 350 mW
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2501 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 2500 MHz
acpicpu0: P2: FFH, lat 10 us, pow 33218 mW, 2400 MHz
acpicpu0: P3: FFH, lat 10 us, pow 31470 mW, 2300 MHz
acpicpu0: P4: FFH, lat 10 us, pow 28074 mW, 2100 MHz
acpicpu0: P5: FFH, lat 10 us, pow 26426 mW, 2000 MHz
acpicpu0: P6: FFH, lat 10 us, pow 24816 mW, 1900 MHz
acpicpu0: P7: FFH, lat 10 us, pow 23233 mW, 1800 MHz
acpicpu0: P8: FFH, lat 10 us, pow 20164 mW, 1600 MHz
acpicpu0: P9: FFH, lat 10 us, pow 18678 mW, 1500 MHz
acpicpu0: P10: FFH, lat 10 us, pow 17226 mW, 1400 MHz
acpicpu0: P11: FFH, lat 10 us, pow 15802 mW, 1300 MHz
acpicpu0: P12: FFH, lat 10 us, pow 14408 mW, 1200 MHz
acpicpu0: P13: FFH, lat 10 us, pow 11713 mW, 1000 MHz
acpicpu0: P14: FFH, lat 10 us, pow 10411 mW, 900 MHz
acpicpu0: P15: FFH, lat 10 us, pow 9140 mW, 800 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2494337000 Hz quality 3000
uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 4 ports with 4 removable, self powered
IPsec: Initialized Security Association Processing.
uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 1.5Gb/s
ahcisata0 port 4: device present, speed: 1.5Gb/s
uhub4 at uhub2 port 1: vendor 8087 (0x8087) product 0024 (0x0024), class 9/0, rev 2.00/0.00, addr 2
uhub4: single transaction translator
uhub4: 6 ports with 6 removable, self powered
uhub5 at uhub3 port 1: vendor 8087 (0x8087) product 0024 (0x0024), class 9/0, rev 2.00/0.00, addr 2
uhub5: single transaction translator
uhub5: 6 ports with 6 removable, self powered
wd0 at atabus0 drive 0
wd0: <Hitachi HCS5C1050CLA382>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <MATSHITABD-MLT UJ260, WM91 065424, 1.01> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
cd0(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
swwdog0: software watchdog initialized
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/10.0/modules
Supports vblank timestamp caching Rev 2 (21.10.2013).
Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at msi4 vec 0 (i915drmkms0)
Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 0
intelfb0 at i915drmkms0
DRM_I915_DEBUG enabled
DRM_I915_DEBUG_GEM enabled
intelfb0: framebuffer at 0xe0005000, size 1920x1080, depth 32, stride 7680
{drm:netbsd:intel_cpu_fifo_underrun_irq_handler+0x64} *ERROR* CPU pipe A FIFO underrun
{drm:netbsd:intel_set_pch_fifo_underrun_reporting+0x14e} *ERROR* uncleared pch fifo underrun on pch transcoder A
{drm:netbsd:cpt_irq_handler+0x1dd} *ERROR* PCH transcoder A FIFO underrun
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)